Milling
Manufacturer catalogs & special catalogs

Uni end milling cutters

Product finder
Filter by:
Alle Filter anzeigen
PMKNS
250109 Longitudinal slot cutter, solid carbide Z=2, short, HB shank, TiAlN
  • Brand: SARA®
  • Article no.: 2501090020
  • Catalogue page: KS-0426
  • Cutting values: SW-0733
Product description
250109 Longitudinal slot cutter, solid carbide Z=2, short, HB shank, TiAlNStaggered prices in online shop

Basic Line longitudinal slot cutter
  • 2 cutting edges, short, 30° right-hand cutting
  • Eccentric relief grinding
  • Cutting material: superfine grain solid carbide

in stock
from 13,00 €
Prices excl. VAT plus shipping costs
(10) Versions
PMKNS
251046 End milling cutter, solid carbide 45° Z=3 long, HB, TiAlN
  • Brand: SARA®
  • Article no.: 2510470030
  • Catalogue page: KS-0428
  • Cutting values: SW-0733
Product description
251046 End milling cutter, solid carbide 45° Z=3 long, HB, TiAlNBasic Line end milling cutter
  • 3 cutting edges, long, 45° right-hand cutting
  • Eccentric relief grinding
  • Cutting material: superfine grain solid carbide

in stock
from 13,75 €
Prices excl. VAT plus shipping costs
(12) Versions
PMKNS
251056 End milling cutter solid carbide Z=short, shank HB, TiAlN
  • Brand: SARA®
  • Article no.: 2510560030
  • Catalogue page: KS-0428
  • Cutting values: SW-0733
Product description
251056 End milling cutter solid carbide Z=short, shank HB, TiAlNStaggered prices in online shop

Basic Line end milling cutter
  • 3 cutting edges, short, 30° right-hand cutting
  • Eccentric relief grinding
  • Cutting material: superfine grain solid carbide

in stock
from 13,00 €
Prices excl. VAT plus shipping costs
(15) Versions
PH
251151 End milling cutter set solid carbide 45° NANO 600, Z=3, Ø1.0-4.0 mm TiSiN
  • Article no.: 2511510001
  • Catalogue page: A05/10-04
Product description
251151 End milling cutter set solid carbide 45° NANO 600, Z=3, Ø1.0-4.0 mm TiSiNSolid carbide milling cutter NANO 600
  • centre-cutting, 45° right-hand helix
  • Smooth, straight shank
  • Cutting material: ultra-superfine grain solid carbide, TiSiN coating

Mini end milling cutter set
in stock
from 410,00 €
Prices excl. VAT plus shipping costs
(2) Versions
PMKNS
251516 End milling cutter, solid carbide Z=4, long, HB shank, TiAlN
  • Brand: SARA®
  • Article no.: 2515160030
  • Catalogue page: KS-0431
  • Cutting values: SW-0733
Product description
251516 End milling cutter, solid carbide Z=4, long, HB shank, TiAlNStaggered prices in online shop

Basic Line end milling cutter
  • 4 cutting edges, long, 30° right-hand cutting
  • Eccentric relief grinding
  • Cutting material: superfine grain solid carbide

in stock
from 17,20 €
Prices excl. VAT plus shipping costs
(10) Versions
PMKNS
251517 End milling cutter, solid carbide Z=4, extra-long, HB shank, TiAlN
  • Brand: SARA®
  • Article no.: 2515170030
  • Catalogue page: KS-0431
  • Cutting values: SW-0733
Product description
251517 End milling cutter, solid carbide Z=4, extra-long, HB shank, TiAlNStaggered prices in online shop

Basic Line end milling cutter
  • 4 cutting edges, extra-long, 30° right-hand cutting
  • Eccentric relief grinding
  • Cutting material: fine grain solid carbide

in stock
from 30,00 €
Prices excl. VAT plus shipping costs
(9) Versions
PKH
254012 End milling cutter, solid carbide Z=6, long, HB shank, TiAlN
  • Brand: SARA®
  • Article no.: 2540120060
  • Catalogue page: KS-0435
  • Cutting values: SW-0748
Product description
254012 End milling cutter, solid carbide Z=6, long, HB shank, TiAlNStaggered prices in online shop

Basic Line end milling cutter
  • 6/8 cutting edges, long, 45° right-hand cutting
  • Eccentric relief grinding
  • Cutting material: fine grain solid carbide

in stock
from 22,80 €
Prices excl. VAT plus shipping costs
(6) Versions
PMKNS
254052 Solid carbide end milling cutter Z=3 HB, TiAlN-Ultra
  • Brand: SARA®
  • Article no.: 2540520040
  • Catalogue page: KS-0429
  • Cutting values: SW-0733
Product description
254052 Solid carbide end milling cutter Z=3 HB, TiAlN-UltraEnd milling cutters
  • With clearance
  • First-rate chip removal due to extremely smooth surface
  • Cutting material: ultra-fine grain solid carbide, TiAlN-Ultra-coated

subsequent delivery
from 25,30 €
Prices excl. VAT plus shipping costs
(21) Versions
PMKNS
254054 Solid carbide end milling cutter Z=4 HA, TiAlN-Ultra
  • Brand: SARA®
  • Article no.: 2540540020
  • Catalogue page: KS-0430
  • Cutting values: SW-0733
Product description
254054 Solid carbide end milling cutter Z=4 HA, TiAlN-UltraEnd milling cutters
  • With clearance
  • Straight shank in accordance with DIN 6535 HA and with driving plane in accordance with DIN 6535 HB
  • First-rate chip removal due to extremely smooth surface
  • Cutting material: ultra-fine grain solid carbide, TiAlN-Ultra-coated

Standard version
  • Smooth shank
  • up to Ø 6 mm with driving planes in accordance with DIN 6535 HB

in stock
from 20,70 €
Prices excl. VAT plus shipping costs
(10) Versions
PMKNS
254056 Solid carbide end milling cutter Z=4 extra long, HA, TiAlN-Ultra
  • Brand: SARA®
  • Article no.: 2540560030
  • Catalogue page: KS-0430
  • Cutting values: SW-0733
Product description
254056 Solid carbide end milling cutter Z=4 extra long, HA, TiAlN-UltraEnd milling cutters
  • With clearance
  • Straight shank in accordance with DIN 6535 HA and with driving plane in accordance with DIN 6535 HB
  • First-rate chip removal due to extremely smooth surface
  • Cutting material: ultra-fine grain solid carbide, TiAlN-Ultra-coated

Extra-long without clearance
  • Smooth shank

subsequent delivery
from 25,40 €
Prices excl. VAT plus shipping costs
(9) Versions
PMKH
254058 Solid carbide end milling cutter Z=6 long HB, TiAlN-Ultra
  • Brand: SARA®
  • Article no.: 2540580060
  • Catalogue page: KS-0434
  • Cutting values: SW-0733
Product description
254058 Solid carbide end milling cutter Z=6 long HB, TiAlN-UltraEnd milling cutters
  • With clearance
  • First-rate chip removal due to extremely smooth surface
  • Cutting material: ultra-fine grain solid carbide, TiAlN-Ultra-coated

Standard version
  • Shank with driving planes in accordance with DIN 6535 HB

in stock
from 43,60 €
Prices excl. VAT plus shipping costs
(10) Versions
PMKNS
254111 End milling cutter solid carbide Z=4 HB, AICrN
  • Brand: SARA®
  • Article no.: 2541110040
  • Catalogue page: KS-0432
  • Cutting values: SW-0736
Product description
254111 End milling cutter solid carbide Z=4 HB, AICrNSteel end milling cutter
  • Unequal pitch for vibration-free milling
  • With corner protection radius R for improved service life

Steel professional

in stock
from 27,90 €
Prices excl. VAT plus shipping costs
(21) Versions
PMKS
254119 End milling cutter, solid carbide 35°/38° cleared Z=4 HB, TiAlN
  • Brand: SARA®
  • Article no.: 2541190030
  • Catalogue page: KS-0449
  • Cutting values: SW-0738
Product description
254119 End milling cutter, solid carbide 35°/38° cleared Z=4 HB, TiAlNStaggered prices in online shop

Basic Line end milling cutter
  • 4 cutting edges, long, 35°/38° right-hand cutting
  • Irregular helix angle for vibration-free milling
  • With clearance
  • Eccentric relief grinding
  • Straight shank in accordance with DIN 6535 HB
  • Cutting material: fine grain solid carbide

in stock
from 21,80 €
Prices excl. VAT plus shipping costs
(11) Versions
PMKS
254125 End milling cutter, solid carbide 35°/38° Z=4 HB, TiAlN
  • Brand: SARA®
  • Article no.: 2541250030
  • Catalogue page: KS-0449
  • Cutting values: SW-0737
Product description
254125 End milling cutter, solid carbide 35°/38° Z=4 HB, TiAlNStaggered prices in online shop

Basic Line end milling cutter
  • 4 cutting edges, long, 35°/38° right-hand cutting
  • Irregular helix angle for vibration-free milling
  • Eccentric relief grinding
  • Straight shank in accordance with DIN 6535 HB
  • Cutting material: fine grain solid carbide

in stock
from 16,90 €
Prices excl. VAT plus shipping costs
(13) Versions
PMK
254204 Milling cutter carb. 35°/38° cleared steel/INOX/Cast iron Z=4 HB AlTiN+
  • Article no.: 2542040200
  • Catalogue page: DAILY-06
Product description
254204 Milling cutter carb. 35°/38° cleared steel/INOX/Cast iron Z=4 HB AlTiN+End milling cutters
  • 4 cutting edges, short, 35°/38° right-hand cutting
  • Irregular helix angle and pitch for low-vibration milling
  • With clearance
  • With protective chamfer F for improved service life
  • Eccentric relief grinding
  • Material: Fine grain solid carbide

Standard with driving plane
in stock
from 99,90 €
Prices excl. VAT plus shipping costs
(1) Versions
PK
254300 End milling cutter solid carbide 35°/38° UT long, cleared Z=4 HA, AlTiN+
  • Brand: PALBIT
  • Article no.: 2543000030
  • Catalogue page: KS-0432
  • Cutting values: SW-0763
Product description
254300 End milling cutter solid carbide 35°/38° UT long, cleared Z=4 HA, AlTiN+End milling cutters
  • With clearance
  • Unequal helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life

subsequent delivery
from 18,90 €
Prices excl. VAT plus shipping costs
(9) Versions
PK
254300 End milling cutter solid carbide 35°/38° UT long, cleared Z=4 HA, AlTiN+
  • Brand: PALBIT
  • Article no.: 2543001001
  • Catalogue page: KS-0428
  • Cutting values: SW-0768
Product description
254300 End milling cutter solid carbide 35°/38° UT long, cleared Z=4 HA, AlTiN+End milling cutters
  • With clearance
  • Unequal helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life

End milling cutter set, 14 pieces
  • 3 of each Ø 6/8/10/12 mm
  • 2 of each Ø 2 mm

in stock
from 535,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PK
254300 Schaftfräser VHM 35°/38° UT lang, freigestellt Z=4 HA, AlTiN+
  • Brand: PALBIT
  • Article no.: 2543001002
Product description
254300 Schaftfräser VHM 35°/38° UT lang, freigestellt Z=4 HA, AlTiN+End milling cutters
  • With clearance
  • Unequal helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life

in stock
from 379,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMK
251033 End milling cutter solid carbide 38/40/42° Z=3 HB, TiAlN
  • Brand: SARA®
  • Article no.: 2510330040
  • Catalogue page: KS-0429
  • Cutting values: SW-0733
Product description
251033 End milling cutter solid carbide 38/40/42° Z=3 HB, TiAlNUniversal

End milling cutters
  • 38°/40°/42° right-hand helix
  • For universal applications
  • For roughing and finishing
  • For large cutting depths
  • Very high degree of smoothness
  • Protective chamfer for increased service life

in stock
from 35,90 €
Prices excl. VAT plus shipping costs
(9) Versions
PMKNS
254050 Solid carbide longitudinal slot cutter Z=2 HA, TiAlN-Ultra
  • Brand: SARA®
  • Article no.: 2540500028
  • Catalogue page: KS-0425
  • Cutting values: SW-0733
Product description
254050 Solid carbide longitudinal slot cutter Z=2 HA, TiAlN-UltraSlot milling cutter
  • With clearance
  • Straight shank up to Ø 2.5 mm smooth, from Ø 2.8 mm with driving planes in accordance with DIN 6535-HB
  • Optimum chip removal due to extremely smooth surface
  • For P9 grooves
  • Cutting material: ultra-fine grain solid carbide, TiAlN-Ultra-coated

subsequent delivery
from 23,30 €
Prices excl. VAT plus shipping costs
(39) Versions
PMK
255100 End milling cutter, solid carbide Z=4 HA, TiAlN
  • Brand: VAN HOORN
  • Article no.: 2551000302
  • Catalogue page: KS-0433
  • Cutting values: SW-0734
Product description
255100 End milling cutter, solid carbide Z=4 HA, TiAlNOther tools with clearance in the van Hoorn manufacturer catalogue

VHRS end milling cutter
  • Cutting material, solid carbide ultra-fine grain TiAlN-coated
  • Special pre-treatment and finishing treatment due to micro radiation
  • Version with 4 or 5 cutting edges
  • For wet and dry machining, extremely high chip removal rates and service life

The specialist in steel

Standard, 4 cutting edges
in stock
from 48,30 €
Prices excl. VAT plus shipping costs
(28) Versions
PH
294248 End milling cutter solid carbide WXS-HS-CRE steel/hard Z=5 short HA TiAlN
  • Brand: OSG
  • Article no.: 2942480615
  • Catalogue page: KS-0440
Product description
294248 End milling cutter solid carbide WXS-HS-CRE steel/hard Z=5 short HA TiAlNTwisted cutting edge, quiet operation up to 65 HRC, finishing geometry, feed rates up to 20,000 mm/min

Torus milling cutter WXS-CRE HPC-Turbomill
  • 5 cutting edges, face cutter geometry for plunge milling
  • Straight shank, suitable for use in shrink fit holders
  • Thanks to a newly developed cutting edge geometry, this milling cutter is especially suitable for extremely high feed rates with normal-strength and hardened materials
  • New, extremely ductile and fracture-proof ultra-fine grain quality with enhanced multi-layer coating (Ultra-WXS)
  • Cutting material: ultra-fine grain solid carbide, TiAlN-coated

Short (WXS-HS-CRE)
in stock
from 120,00 €
Prices excl. VAT plus shipping costs
(4) Versions
PKNS
251031 End milling cutter solid carbide steel/cast iron/super alloy Z=3 HB TiAlN
  • Brand: ATORN®
  • Article no.: 2510310030
Product description
251031 End milling cutter solid carbide steel/cast iron/super alloy Z=3 HB TiAlNEnd milling cutters
  • With clearance
  • 41°/43°/45° right-hand helix
  • Micro edge protection for a longer service life
  • For roughing and finishing
  • Optimised chip removal during slot milling
  • Up to 60 % higher feed rates
  • Up to 4 times longer service life
  • Runs without vibration
  • Enhanced workpiece surface finish quality
  • Suitable for all materials up to 1400 N/mm2
  • Cutting material: ultra-fine grain solid carbide, TiAlN-coated

in stock
from 40,20 €
Prices excl. VAT plus shipping costs
(9) Versions
PMKN
251053 End milling cutter solid carbide 30° Z=3 long, HA, TiAlN
  • Brand: SARA®
  • Article no.: 2510530020
Product description
251053 End milling cutter solid carbide 30° Z=3 long, HA, TiAlNEnd milling cutters
  • Eccentric relief grinding

subsequent delivery
from 26,60 €
Prices excl. VAT plus shipping costs
(12) Versions
251101 End milling cutter solid carbide 45° NANO 600, Z=3, TiSiN
  • Article no.: 2511010010
Product description
251101 End milling cutter solid carbide 45° NANO 600, Z=3, TiSiN
in stock
from 24,40 €
Prices excl. VAT plus shipping costs
(6) Versions
PMKN
254200 Longitudinal slot cutter, solid carbide 30° Z=2 short HA AlTiN+
  • Article no.: 2542000050
  • Catalogue page: DAILY-04
Product description
254200 Longitudinal slot cutter, solid carbide 30° Z=2 short HA AlTiN+Slot drill
  • 2 cutting edges, short, 30° right-hand cutting
  • Eccentric relief grinding
  • Cutting material: superfine grain solid carbide, AlTiN+ coated
  • From Ø 6 mm with clamping surface in accordance with DIN 6535 HB

in stock
from 3,58 €
Prices excl. VAT plus shipping costs
(4) Versions
PMKN
250102 End milling cutter solid carbide 30° Z=2 HA
  • Brand: SARA®
  • Article no.: 2501020020
Product description
250102 End milling cutter solid carbide 30° Z=2 HASlot drill
  • Eccentric relief grinding

subsequent delivery
from 15,00 €
Prices excl. VAT plus shipping costs
(17) Versions
254120 End milling cutter solid carbide Z=4, shank HB, AlCrN
  • Article no.: 2541270060
subsequent delivery
from 29,80 €
Prices excl. VAT plus shipping costs
(15) Versions
PMKN
254202 End milling cutter, solid carbide 45° Z=3 long HB AlTiN+
  • Article no.: 2542020080
  • Catalogue page: DAILY-05
Product description
254202 End milling cutter, solid carbide 45° Z=3 long HB AlTiN+End milling cutters
  • 3 cutting edges, long, 45° right-hand cutting
  • Eccentric relief grinding
  • Material: fine grain solid carbide

14 immediately available
from 8,89 €
Prices excl. VAT plus shipping costs
(1) Versions
PH
251155 End milling cutter set sol. carbide 45° NANO 600, Z=4, Ø6.0-12.0 mm TiSiN
  • Brand: SARA®
  • Article no.: 2511550001
  • Catalogue page: A01/11-08
Product description
251155 End milling cutter set sol. carbide 45° NANO 600, Z=4, Ø6.0-12.0 mm TiSiNSolid carbide milling cutter NANO 600
  • centre-cutting, 45° right-hand helix
  • Smooth, straight shank
  • Cutting material: ultra-superfine grain solid carbide, TiSiN coating

End milling cutter set
subsequent delivery
from 179,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKH
254005 Solid carbide end milling cutter Z=4 short, HA, TiAlN
  • Brand: SARA®
  • Article no.: 2540050020
Product description
254005 Solid carbide end milling cutter Z=4 short, HA, TiAlNUp to 55 HRC

End milling cutters
  • Short and long versions
  • Cutting material: ultra-fine grain solid carbide, TiAlN-coated

Short
in stock
from 32,50 €
Prices excl. VAT plus shipping costs
(8) Versions
PMKN
250106 End milling cutter solid carbide 30° Z=2 HA, TiAlN
  • Brand: SARA®
  • Article no.: 2501060020
Product description
250106 End milling cutter solid carbide 30° Z=2 HA, TiAlNSlot drill
  • Eccentric relief grinding

subsequent delivery
from 8,56 €
Prices excl. VAT plus shipping costs
(17) Versions
PKNS
251030 End milling cutter solid carbide steel/cast iron/super alloy Z=3 HA TiAlN
  • Brand: ATORN®
  • Article no.: 2510300030
Product description
251030 End milling cutter solid carbide steel/cast iron/super alloy Z=3 HA TiAlNEnd milling cutters
  • With clearance
  • 41°/43°/45° right-hand helix
  • Micro edge protection for a longer service life
  • For roughing and finishing
  • Optimised chip removal during slot milling
  • Up to 60 % higher feed rates
  • Up to 4 times longer service life
  • Runs without vibration
  • Enhanced workpiece surface finish quality
  • Suitable for all materials up to 1400 N/mm2
  • Cutting material: ultra-fine grain solid carbide, TiAlN-coated

Standard
External stock
from 38,30 €
Prices excl. VAT plus shipping costs
(4) Versions
PMKSH
251049 End milling cutter solid carbide 45° Z=3 HA, TiAlN
  • Brand: VAN HOORN
  • Article no.: 2510490040
Product description
251049 End milling cutter solid carbide 45° Z=3 HA, TiAlNVHVFFW end milling cutter
  • Cutting material: ultra-fine grain solid carbide, TiAlN-coated
  • Special microwave pre-treatment and finishing treatment
  • New chip flute geometry for enhanced cooling and chip flow
  • For wet and dry machining, extremely high chip removal rates and long service life

subsequent delivery
from 21,40 €
Prices excl. VAT plus shipping costs
(1) Versions
PH
251154 End milling cutter set sol. carbide 45° NANO 600, Z=3, Ø6.0-12.0 mm TiSiN
  • Brand: SARA®
  • Article no.: 2511540001
  • Catalogue page: A01/11-08
Product description
251154 End milling cutter set sol. carbide 45° NANO 600, Z=3, Ø6.0-12.0 mm TiSiNSolid carbide milling cutter NANO 600
  • centre-cutting, 45° right-hand helix
  • Smooth, straight shank
  • Cutting material: ultra-superfine grain solid carbide, TiSiN coating

End milling cutter set
subsequent delivery
from 179,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKN
251506 End milling cutter solid carbide, steel/cast iron, Z=4 short, HA
  • Brand: SARA®
  • Article no.: 2515060020
Product description
251506 End milling cutter solid carbide, steel/cast iron, Z=4 short, HAEnd milling cutters
  • Eccentric relief grinding

subsequent delivery
from 14,20 €
Prices excl. VAT plus shipping costs
(15) Versions
PMKN
251509 End milling cutter solid carbide, steel/cast iron, Z=4 short, HA, TiAlN
  • Brand: SARA®
  • Article no.: 2515090020
Product description
251509 End milling cutter solid carbide, steel/cast iron, Z=4 short, HA, TiAlNEnd milling cutters
  • Eccentric relief grinding

in stock
from 20,40 €
Prices excl. VAT plus shipping costs
(15) Versions
PMKH
254001 Longitudinal slot cutter, solid carbide Z=2 HA, TiAlN
  • Brand: SARA®
  • Article no.: 2540010030
Product description
254001 Longitudinal slot cutter, solid carbide Z=2 HA, TiAlNUp to 55 HRC

Slot drill
  • Driving planes in accordance with DIN 6535-HB, up to Ø 2.5 mm smooth
  • Cutting material: ultra-fine grain solid carbide, TiAlN-coated

subsequent delivery
from 18,52 €
Prices excl. VAT plus shipping costs
(7) Versions
PMKH
254006 Solid carbide end milling cutter Z=4 short, HB, TiAlN
  • Brand: SARA®
  • Article no.: 2540060090
Product description
254006 Solid carbide end milling cutter Z=4 short, HB, TiAlNUp to 55 HRC

End milling cutters
  • Short and long versions
  • Cutting material: ultra-fine grain solid carbide, TiAlN-coated

Short with driving plane
in stock
from 34,04 €
Prices excl. VAT plus shipping costs
(10) Versions
PMKNS
254051 Longitudinal slot cutter, solid carbide extra-long, HB shank, TiAlN-Ultra
  • Brand: ATORN®
  • Article no.: 2540510035
  • Catalogue page: WS4550455
Product description
254051 Longitudinal slot cutter, solid carbide extra-long, HB shank, TiAlN-UltraSlot milling cutter
  • With clearance
  • Straight shank up to Ø 2.5 mm smooth, from Ø 2.8 mm with driving planes in accordance with DIN 6535-HB
  • Optimum chip removal due to extremely smooth surface
  • For P9 grooves
  • Cutting material: ultra-fine grain solid carbide, TiAlN-Ultra-coated

External stock
from 47,60 €
Prices excl. VAT plus shipping costs
(6) Versions
PMKH
254109 End milling cutter solid carbide 45° Z=6 XL HA, TiAlN
  • Brand: SARA®
  • Article no.: 2541090060
  • Catalogue page: KS-0435
  • Cutting values: SW-0748
Product description
254109 End milling cutter solid carbide 45° Z=6 XL HA, TiAlNUp to 55 HRC

End milling cutters
  • Extra-long version
  • Cutting material: ultra-fine grain solid carbide, TiAlN-coated

in stock
from 45,30 €
Prices excl. VAT plus shipping costs
(7) Versions
PMK
255101 End milling cutter, solid carbide Z=5 HA, TiAlN
  • Brand: VAN HOORN
  • Article no.: 2551010603
  • Catalogue page: KS-0434
  • Cutting values: SW-0735
Product description
255101 End milling cutter, solid carbide Z=5 HA, TiAlNOther tools with clearance in the van Hoorn manufacturer catalogue

VHRS end milling cutter
  • Cutting material, solid carbide ultra-fine grain TiAlN-coated
  • Special pre-treatment and finishing treatment due to micro radiation
  • Version with 4 or 5 cutting edges
  • For wet and dry machining, extremely high chip removal rates and service life

for trochoid milling

Standard, 5 cutting edges
in stock
from 24,76 €
Prices excl. VAT plus shipping costs
(29) Versions
294027 Slot cutter WXL-2D-DE carb. steel/hard/INOX/iron/NE Z=2 HA TiAlN
  • Brand: OSG
  • Article no.: 2940270110
Product description
294027 Slot cutter WXL-2D-DE carb. steel/hard/INOX/iron/NE Z=2 HA TiAlNMilling
Supplier and manufacturer catalogues
External stock
from 56,50 €
Prices excl. VAT plus shipping costs
(6) Versions
294047 End milling cutter WXL-EMS carbide steel/hard/INOX/cast/NE Z=4 HA TiAlN
  • Brand: OSG
  • Article no.: 2940470100
Product description
294047 End milling cutter WXL-EMS carbide steel/hard/INOX/cast/NE Z=4 HA TiAlNMilling
Supplier and manufacturer catalogues
External stock
from 65,50 €
Prices excl. VAT plus shipping costs
(14) Versions
294080 End milling cutter, solid carbide FXS-PKE
  • Brand: OSG
  • Article no.: 2940800301
Product description
294080 End milling cutter, solid carbide FXS-PKEMilling
Supplier and manufacturer catalogues
External stock
from 100,00 €
Prices excl. VAT plus shipping costs
(23) Versions
294191 End milling cutter, solid carbide WX-LN-EDS
  • Brand: OSG
  • Article no.: 2941912508
Product description
294191 End milling cutter, solid carbide WX-LN-EDSMilling
Supplier and manufacturer catalogues
subsequent delivery
from 55,50 €
Prices excl. VAT plus shipping costs
(1) Versions
294246 End milling cutter, solid carbide WX-CRE
  • Brand: OSG
  • Article no.: 2942460205
Product description
294246 End milling cutter, solid carbide WX-CREMilling
Supplier and manufacturer catalogues
External stock
from 94,00 €
Prices excl. VAT plus shipping costs
(8) Versions
294247 End milling cutter solid carbide WXS-CRE, steel/hard, Z=5, HA, TiAlN
  • Brand: OSG
  • Article no.: 2942470375
  • Catalogue page: WS5201890
Product description
294247 End milling cutter solid carbide WXS-CRE, steel/hard, Z=5, HA, TiAlN
External stock
from 112,00 €
Prices excl. VAT plus shipping costs
(6) Versions