Clamping
Manufacturer catalogs & special catalogs

Pull studs

Product finder
Filter by:
Alle Filter anzeigen
438501 Pull stud DIN69872A
  • Brand: ATORN®
  • Article no.: 4385010040
  • Catalogue page: KS-1172
Product description
438501 Pull stud DIN69872APull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 AD, with bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 AD, with bore
in stock
from 11,95 €
Prices excl. VAT plus shipping costs
(3) Versions
438502 Pull stud DIN69872B
  • Brand: ATORN®
  • Article no.: 4385020040
  • Catalogue page: KS-1172
Product description
438502 Pull stud DIN69872BPull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 AF, without bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 AF, without bore
in stock
from 12,40 €
Prices excl. VAT plus shipping costs
(3) Versions
438505 Pull stud DIN7388 IIB with hole
  • Brand: ATORN®
  • Article no.: 4385050040
  • Catalogue page: KS-1172
Product description
438505 Pull stud DIN7388 IIB with holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 UD, with bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 UD, with bore
in stock
from 13,30 €
Prices excl. VAT plus shipping costs
(2) Versions
438506 Pull stud DIN7388 IIB without hole
  • Brand: ATORN®
  • Article no.: 4385060040
  • Catalogue page: KS-1172
Product description
438506 Pull stud DIN7388 IIB without holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 UF, without bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 UF, without bore
in stock
from 12,40 €
Prices excl. VAT plus shipping costs
(2) Versions
438512 Pull stud DIN ISO 7388-2 / 90° without hole
  • Brand: ATORN®
  • Article no.: 4385129040
  • Catalogue page: KS-1173
Product description
438512 Pull stud DIN ISO 7388-2 / 90° without holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JF 90°, without bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JF 90°, without bore
in stock
from 5,24 €
Prices excl. VAT plus shipping costs
(2) Versions
438515 Pull stud OTT 15° with internal thread
  • Brand: ATORN®
  • Article no.: 4385150040
  • Catalogue page: KS-1173
Product description
438515 Pull stud OTT 15° with internal threadPull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

Ott ring groove, 15° with tapped head, for DIN 69871 AD shank
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

Ott ring groove, 15° with tapped head, for DIN 69871 AD shank
in stock
from 14,90 €
Prices excl. VAT plus shipping costs
(2) Versions
438520, Pull stud Special SK40, S20x2, without hole
  • Brand: ATORN®
  • Article no.: 4385200041
  • Catalogue page: KS-1172
Product description
438520, Pull stud Special SK40, S20x2, without holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

Saw-tooth thread stud SK40 S20X2 for cover
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

Saw-tooth thread stud SK40 S20X2 for cover
in stock
from 19,70 €
Prices excl. VAT plus shipping costs
(1) Versions
438509 Pull stud DIN ISO 7388-2 / 45° with hole
  • Brand: ATORN®
  • Article no.: 4385094530
  • Catalogue page: KS-1172
Product description
438509 Pull stud DIN ISO 7388-2 / 45° with holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JD 45°, with bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JD 45°, with bore
in stock
from 11,30 €
Prices excl. VAT plus shipping costs
(3) Versions
438510 Pull stud DIN ISO 7388-2 / 45° without hole
  • Brand: ATORN®
  • Article no.: 4385104530
  • Catalogue page: KS-1172
Product description
438510 Pull stud DIN ISO 7388-2 / 45° without holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JF 45°, without bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JF 45°, without bore
in stock
from 11,30 €
Prices excl. VAT plus shipping costs
(3) Versions
438508 Pull stud DIN ISO 7388-2 / 60° with hole
  • Brand: ATORN®
  • Article no.: 4385086050
  • Catalogue page: KS-1173
Product description
438508 Pull stud DIN ISO 7388-2 / 60° with holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JD 60°, with bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JD 60°, with bore
in stock
from 7,48 €
Prices excl. VAT plus shipping costs
(3) Versions
438510 Pull stud DIN ISO 7388-2 / 60° without hole
  • Brand: ATORN®
  • Article no.: 4385106050
  • Catalogue page: KS-1173
Product description
438510 Pull stud DIN ISO 7388-2 / 60° without holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JF 60°, without bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JF 60°, without bore
in stock
from 7,48 €
Prices excl. VAT plus shipping costs
(3) Versions
438511 Pull stud DIN ISO 7388-2 / 90° with hole
  • Brand: ATORN®
  • Article no.: 4385119050
  • Catalogue page: KS-1173
Product description
438511 Pull stud DIN ISO 7388-2 / 90° with holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JD 90°, with bore
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

DIN ISO 7388-3 JD 90°, with bore
in stock
from 7,48 €
Prices excl. VAT plus shipping costs
(2) Versions
438516 Pull stud OTT 15° with hole
  • Brand: ATORN®
  • Article no.: 4385160040
  • Catalogue page: KS-1173
Product description
438516 Pull stud OTT 15° with holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

Ott ring groove, 15° with bore, for DIN 69871 AD shank
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

Ott ring groove, 15° with bore, for DIN 69871 AD shank
in stock
from 12,05 €
Prices excl. VAT plus shipping costs
(2) Versions
438517 Pull stud OTT 15° without hole
  • Brand: ATORN®
  • Article no.: 4385170050
  • Catalogue page: KS-1173
Product description
438517 Pull stud OTT 15° without holePull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

Ott ring groove, 15° without bore, for DIN 69871 AD shank
Pull studs
  • For tools with a steep-angle taper in accordance with DIN 69871 and JIS B 6339 (MAS-BT)
  • All pull studs made from 16MnCr5, case hardened to HRC 58 ± 2
  • Soft thread and bore, burnished and ground
  • Pull studs with O-ring = sealed
  • Other versions available on request (machine model must be specified)

Ott ring groove, 15° without bore, for DIN 69871 AD shank
in stock
from 6,04 €
Prices excl. VAT plus shipping costs
(2) Versions