- Brand: FAHRION
- Article no.: 4312300730
- Catalogue page: KS-1186
Product description
431230 Collet chuck Centro-P DIN ISO 7388-1ADTrue-running accuracy 1 µmCENTRO|P precision ER collet chuck- 30° trapezoidal thread
- With ground, extra-long double guide compared to 60° V-thread in conventional collet chucks
- Coated clamping nut reduces friction when tightening the nut
- Exact nut centring to minimise imbalance
- Up to 100 % higher holding forces compared with conventional collet chucks
- Pre-balanced to G 2.5 at 25,000 rpm
- Entirely suitable for dry processes and hard milling
- Insensitive to temperature fluctuations up to 200 °C
- Leak-proof up to 80 bar, cooling possible along the cutting edge
- Extremely high system concentricity and precision of 3 µm achieved with a 2 µm GER-HP collet
- Supplied without clamping nuts or a chuck key, please order separately!
- Slim and conical versions available on request
DIN ISO 7388-1 / DIN 69871 AD/AF
from 114,50 €
Prices excl. VAT plus shipping costs
- Brand: FAHRION
- Article no.: 4312320750
- Catalogue page: KS-1186
Product description
431232 Collet chuck Centro-P DIN 69893 HSK-ATrue-running accuracy 1 µmCENTRO|P precision ER collet chuck- 30° trapezoidal thread
- With ground, extra-long double guide compared to 60° V-thread in conventional collet chucks
- Coated clamping nut reduces friction when tightening the nut
- Exact nut centring to minimise imbalance
- Up to 100 % higher holding forces compared with conventional collet chucks
- Pre-balanced to G 2.5 at 25,000 rpm
- Entirely suitable for dry processes and hard milling
- Insensitive to temperature fluctuations up to 200 °C
- Leak-proof up to 80 bar, cooling possible along the cutting edge
- Extremely high system concentricity and precision of 3 µm achieved with a 2 µm GER-HP collet
- Supplied without clamping nuts or a chuck key, please order separately!
- Slim and conical versions available on request
DIN 69893 type A (HSK-A)- Internal coolant supply
- When machining with internal coolant supply, a coolant transfer pipe with art.no. 431011... should be used
from 147,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4312351607
- Catalogue page: KS-1185
Product description
431235 ATORN precision collet chuck DIN ISO 7388-1ADTrue-running accuracy 3 μm incl. clamping nutPrecision ER collet chuck- 30° ground trapezoidal thread with special anti-friction coating
- Up to twice the holding forces of conventional collet chucks are possible thanks to lower friction when tightening the nut and due to the collet being seated entirely inside the chuck cone.
- Resistant to temperature fluctuations and fully suitable for dry processes and hard milling up to 200 °C.
- Clamping forces are distributed evenly across the entire cylindrical surface, and optimum radial force absorption produces perfect surfaces
- Excellent damping properties
- Increasing the chuck body to the diameter of the clamping nut creates enormous stability without any protruding contours.
- Extremely high concentricity and precision, 3 µm
- Pre-balanced to G 2.5 at 22,000 rpm
- Leak-proof up to 80 bar with radially sealed collets
- For all GER collets
- Supplied with clamping nut
- Please order roller chuck key separately
Torque wrench recommended
DIN ISO 7388-1 / DIN 69871 AD, incl. clamping nut
from 152,00 €
Prices excl. VAT plus shipping costs
- Brand: FAHRION
- Article no.: 4313364065
- Catalogue page: KS-1188
Product description
431336 Heavy Duty HDC clamping nut, DIN ISO 7388-1 ADTrue-running accuracy 1 µmHeavy Duty clamping nut HDC-32- High stability and radial rigidity with reinforced chuck body
- Trapezoidal fine thread in the clamping nut leads to optimum conversion of the tightening torques into clamping force
- Ball bearing-mounted clamping nut prevents twisting of the collet and reduces vibrations
- High concentricity due to full fit of the collet in the chuck cone
- Delivery includes clamping nut without roller clamping key
DIN ISO 7388-1 AD
from 210,00 €
Prices excl. VAT plus shipping costs
- Brand: HAIMER
- Article no.: 4312134001
- Catalogue page: KS-1191
Product description
431213 HG clamping nut DIN ISO 7388-1AD/BHigh-precision chuck HG- Straight shank tools clamped with a high level precision using HG collets
- Very well suited to high-speed machining
- Taper angle tolerance quality AT3
- Finely balanced to G 2.5 at 25,000 rpm
- True-running accuracy: 3 µm
- Supplied with clamping screw and pull-out hook, no collet
DIN ISO 7388-1 / DIN 69871 AD
from 168,50 €
Prices excl. VAT plus shipping costs
- Brand: DIEBOLD
- Article no.: 4403026320
Product description
440302 Power clamping nut DIN DIN 69893 Form A / HSK-APower chuck UltraGrip®- Optimised radial run-out thanks to single-piece base body
- Maximum clamping force and stability thanks to clamping via rotary clamping nuts and needle bearings, thus clamping force of up to 4000Nm depending on Ø
- High precision and balance quality
- Flexible use thanks to reducing bushes
- Vibration-damping effect thanks to size and multi-part design
- Maximum protection against milling tools being extracted
- Internal coolant supply up to 80 bar suitable
- Maintenance-free technology
- Supplied without chuck key
- balanced G2.5 / 20,000 rpm
HSK-A DIN 69893- Internal coolant supply
- when machining with internal coolant supply, a coolant transfer pipe art.no. 431011.... should be used
from 497,00 €
Prices excl. VAT plus shipping costs
- Brand: HAIMER
- Article no.: 4312174001
Product description
431217 HG clamping nut DIN ISO 7388-2AD/BHigh-precision chuck HG- Straight shank tools clamped with a high level precision using HG collets
- Very well suited to high-speed machining
- Taper angle tolerance quality AT3
- Finely balanced to G 2.5 at 25,000 rpm
- True-running accuracy: 3 µm
- Supplied with clamping screw and pull-out hook, no collet
JIS B 6339 BT AD(Internal coolant supply)
from 171,00 €
Prices excl. VAT plus shipping costs
- Brand: HAIMER
- Article no.: 4312196301
- Catalogue page: KS-1191
Product description
431219 HG clamping nut DIN 69893 HSK-AHigh-precision chuck HG- Straight shank tools clamped with a high level precision using HG collets
- Very well suited to high-speed machining
- Taper angle tolerance quality AT3
- Finely balanced to G 2.5 at 25,000 rpm
- True-running accuracy: 3 µm
- Supplied with clamping screw and pull-out hook, no collet
DIN 69893-1 HSK-A- Internal coolant supply
- When machining with internal coolant supply, a coolant transfer pipe with art.no. 431011... should be used
from 248,00 €
Prices excl. VAT plus shipping costs
- Brand: HAIMER
- Article no.: 4312201050
- Catalogue page: KS-1191
Product description
431220 Collet for HG chuckAccessories for high-precision chuck HGHG collets- Clamp straight shank tools in HG chucks with a high level of precision
- Further sizes available on request
from 99,50 €
Prices excl. VAT plus shipping costs
- Brand: DIEBOLD
- Article no.: 4000023781
from 145,50 €
Prices excl. VAT plus shipping costs
- Brand: FAHRION
- Article no.: 4313356370
- Catalogue page: KS-1188
Product description
431335 Heavy Duty HDC clamping nut, DIN 69893 type ATrue-running accuracy 1 µmHeavy Duty clamping nut HDC-32- High stability and radial rigidity with reinforced chuck body
- Trapezoidal fine thread in the clamping nut leads to optimum conversion of the tightening torques into clamping force
- Ball bearing-mounted clamping nut prevents twisting of the collet and reduces vibrations
- High concentricity due to full fit of the collet in the chuck cone
- Delivery includes clamping nut without roller clamping key
DIN 69893 Form A
from 255,00 €
Prices excl. VAT plus shipping costs
- Brand: FAHRION
- Article no.: 4313374060
- Catalogue page: KS-1188
Product description
431337 Heavy Duty HDC clamping nut, DIN ISO 7388-2 ADTrue-running accuracy 1 µmHeavy Duty clamping nut HDC-32- High stability and radial rigidity with reinforced chuck body
- Trapezoidal fine thread in the clamping nut leads to optimum conversion of the tightening torques into clamping force
- Ball bearing-mounted clamping nut prevents twisting of the collet and reduces vibrations
- High concentricity due to full fit of the collet in the chuck cone
- Delivery includes clamping nut without roller clamping key
DIN ISO 7388-2 AD
from 87,20 €
Prices excl. VAT plus shipping costs
- Brand: FAHRION
- Article no.: 4313384060
Product description
431338 Heavy Duty HDC clamping nut, DIN ISO 7388-2 AD with planar supportTrue-running accuracy 1 µmHeavy Duty clamping nut HDC-32- High stability and radial rigidity with reinforced chuck body
- Trapezoidal fine thread in the clamping nut leads to optimum conversion of the tightening torques into clamping force
- Ball bearing-mounted clamping nut prevents twisting of the collet and reduces vibrations
- High concentricity due to full fit of the collet in the chuck cone
- Delivery includes clamping nut without roller clamping key
DIN ISO 7388-2 AD with planar support
from 329,00 €
Prices excl. VAT plus shipping costs
- Brand: DIEBOLD
- Article no.: 4402004020
- Catalogue page: KS-1192
Product description
440200 Power clamping nut UltraJet 3.0 DIN ISO 7388-1 AD / DIN 69871 ADPower chuck UltraJet® 3.0The
UltraJet® 3.0 power chuck is an innovative combination of the established
JetSleeve® principle and the
UltraGrip® 3.0 power chuck. When using the
UltraJet® 3.0 it is almost impossible to run through the chips during heavy machining, which results in even higher cutting data and considerably longer tool service lives. The coolant supply is channelled at high pressure through
the UltraJet® 3.0 mount and through the advanced nozzle configuration onto the cutting tool. The Venturi effect keeps the mixture on the tool cutting edge, irrespective of rotational speed.
- Optimised radial run-out thanks to single-piece base body
- Maximum clamping force and stability thanks to clamping via rotary clamping nuts and needle bearings, thus clamping force of up to 4000Nm depending on Ø
- High precision and balance quality
- Flexible use thanks to reducing bushes
- Vibration-damping effect thanks to size and multi-part design
- Maximum protection against milling tools being extracted
- Internal coolant supply up to 80 bar suitable
- Maintenance-free technology
- Supplied without chuck key
- balanced G2.5 / 20,000 rpm
DIN ISO 7388-1 / DIN 69871 AD/AF
from 522,00 €
Prices excl. VAT plus shipping costs
- Brand: DIEBOLD
- Article no.: 4402014020
- Catalogue page: KS-1192
Product description
440201 Power clamping nut UltraJet 3.0 DIN ISO 7388-2 / JIS B 6339Power chuck UltraJet® 3.0The
UltraJet® 3.0 power chuck is an innovative combination of the established
JetSleeve® principle and the
UltraGrip® 3.0 power chuck. When using the
UltraJet® 3.0 it is almost impossible to run through the chips during heavy machining, which results in even higher cutting data and considerably longer tool service lives. The coolant supply is channelled at high pressure through
the UltraJet® 3.0 mount and through the advanced nozzle configuration onto the cutting tool. The Venturi effect keeps the mixture on the tool cutting edge, irrespective of rotational speed.
- Optimised radial run-out thanks to single-piece base body
- Maximum clamping force and stability thanks to clamping via rotary clamping nuts and needle bearings, thus clamping force of up to 4000Nm depending on Ø
- High precision and balance quality
- Flexible use thanks to reducing bushes
- Vibration-damping effect thanks to size and multi-part design
- Maximum protection against milling tools being extracted
- Internal coolant supply up to 80 bar suitable
- Maintenance-free technology
- Supplied without chuck key
- balanced G2.5 / 20,000 rpm
DIN ISO 7388-2 / MAS BT JIS B 6339
from 531,00 €
Prices excl. VAT plus shipping costs
- Brand: DIEBOLD
- Article no.: 4402026320
- Catalogue page: KS-1192
Product description
440202 Power clamping nut UltraJet 3.0 DIN DIN 69893 Form A / HSK-APower chuck UltraJet® 3.0The
UltraJet® 3.0 power chuck is an innovative combination of the established
JetSleeve® principle and the
UltraGrip® 3.0 power chuck. When using the
UltraJet® 3.0 it is almost impossible to run through the chips during heavy machining, which results in even higher cutting data and considerably longer tool service lives. The coolant supply is channelled at high pressure through
the UltraJet® 3.0 mount and through the advanced nozzle configuration onto the cutting tool. The Venturi effect keeps the mixture on the tool cutting edge, irrespective of rotational speed.
- Optimised radial run-out thanks to single-piece base body
- Maximum clamping force and stability thanks to clamping via rotary clamping nuts and needle bearings, thus clamping force of up to 4000Nm depending on Ø
- High precision and balance quality
- Flexible use thanks to reducing bushes
- Vibration-damping effect thanks to size and multi-part design
- Maximum protection against milling tools being extracted
- Internal coolant supply up to 80 bar suitable
- Maintenance-free technology
- Supplied without chuck key
- balanced G2.5 / 20,000 rpm
HSK-A DIN 69893- Internal coolant supply
- when machining with internal coolant supply, a coolant transfer pipe art.no. 431011.... should be used
from 549,00 €
Prices excl. VAT plus shipping costs
- Brand: DIEBOLD
- Article no.: 4403004020
Product description
440300 Power clamping nut DIN ISO 7388-1 AD / DIN 69871 ADPower chuck UltraGrip®- Optimised radial run-out thanks to single-piece base body
- Maximum clamping force and stability thanks to clamping via rotary clamping nuts and needle bearings, thus clamping force of up to 4000Nm depending on Ø
- High precision and balance quality
- Flexible use thanks to reducing bushes
- Vibration-damping effect thanks to size and multi-part design
- Maximum protection against milling tools being extracted
- Internal coolant supply up to 80 bar suitable
- Maintenance-free technology
- Supplied without chuck key
- balanced G2.5 / 20,000 rpm
DIN ISO 7388-1 / DIN 69871 AD/AF
from 390,00 €
Prices excl. VAT plus shipping costs
- Brand: DIEBOLD
- Article no.: 4403014020
Product description
440301 Power clamping nut DIN ISO 7388-2 / JIS B 6339Power chuck UltraGrip®- Optimised radial run-out thanks to single-piece base body
- Maximum clamping force and stability thanks to clamping via rotary clamping nuts and needle bearings, thus clamping force of up to 4000Nm depending on Ø
- High precision and balance quality
- Flexible use thanks to reducing bushes
- Vibration-damping effect thanks to size and multi-part design
- Maximum protection against milling tools being extracted
- Internal coolant supply up to 80 bar suitable
- Maintenance-free technology
- Supplied without chuck key
- balanced G2.5 / 20,000 rpm
DIN ISO 7388-2 / MAS BT JIS B 6339
from 425,00 €
Prices excl. VAT plus shipping costs
- Brand: ALBRECHT
- Article no.: 4411406309
Product description
441140 Micro precision clamping nut AMC HSK-A 63Micro precision chuck AMC- Ideal for micro-tools
- Clamping range 1.0 to 6.0 mm
- Optional peripheral or central cooling
- Improved damping compared with shrink-fit technology
- Slim protruding contour D1 = 13.5 mm
- Perfect concentricity < 3 µm for 2.5 x D
- Pre-balanced to G 2.5 / 25,000 rpm
DIN 69893 HSK-A- Internal coolant supply
- When machining with inner coolant supply, a coolant transfer pipe Art. No. 431011.... should be used
from 319,00 €
Prices excl. VAT plus shipping costs
- Brand: ALBRECHT
- Article no.: 4421403007
Product description
442140 Micro precision clamping nut AMC DIN ISO 7388-1Micro precision chuck AMC- Ideal for micro-tools
- Clamping range 1.0 to 6.0 mm
- Optional peripheral or central cooling
- Improved damping compared with shrink-fit technology
- Slim protruding contour D1 = 13.5 mm
- Perfect concentricity < 3 µm for 2.5 x D
- Pre-balanced to G 2.5 / 25,000 rpm
DIN ISO 7388-1 AD (DIN 69871 AD)
from 295,00 €
Prices excl. VAT plus shipping costs
- Brand: BILZ
- Article no.: 4422416314
- Catalogue page: KS-1189
Product description
442241 Micro collet holder DIN 69893 type AMicro collet holder- Narrow design for deep cavities
- For machining with high speed (> 10,000 rpm)
- High holding forces due to longer precision collet
- Symmetrical design to achieve a high balancing quality
- Pre-balanced G 2.5 / 35,000 rpm
- Max. true running accuracy < 0.005 mm at 3xD
DIN 69893 Form A
from 95,60 €
Prices excl. VAT plus shipping costs
- Brand: BILZ
- Article no.: 4422433201
- Catalogue page: KS-1189
Product description
442243 Micro collet holder DIN 69893 type EMicro collet holder- Narrow design for deep cavities
- For machining with high speed (> 10,000 rpm)
- High holding forces due to longer precision collet
- Symmetrical design to achieve a high balancing quality
- Pre-balanced G 2.5 / 35,000 rpm
- Max. true running accuracy < 0.005 mm at 3xD
DIN 69893, Type E
from 241,00 €
Prices excl. VAT plus shipping costs
- Brand: BILZ
- Article no.: 4422442001
- Catalogue page: KS-1190
Product description
442244 Micro collet holder with straight shankMicro collet holder- Narrow design for deep cavities
- For machining with high speed (> 10,000 rpm)
- High holding forces due to longer precision collet
- Symmetrical design to achieve a high balancing quality
- Pre-balanced G 2.5 / 35,000 rpm
- Max. true running accuracy < 0.005 mm at 3xD
Straight shank
from 77,00 €
Prices excl. VAT plus shipping costs
- Brand: BILZ
- Article no.: 4422451003
- Catalogue page: KS-1190
Product description
442245 Collet WMC for micro collet holderMicro collet holder- Narrow design for deep cavities
- For machining with high speed (> 10,000 rpm)
- High holding forces due to longer precision collet
- Symmetrical design to achieve a high balancing quality
- Pre-balanced G 2.5 / 35,000 rpm
- Max. true running accuracy < 0.005 mm at 3xD
Collet WMC
from 34,20 €
Prices excl. VAT plus shipping costs
- Brand: BILZ
- Article no.: 4422461025
- Catalogue page: KS-1190
Product description
442246 Clamping key for micro collet holderMicro collet holder- Narrow design for deep cavities
- For machining with high speed (> 10,000 rpm)
- High holding forces due to longer precision collet
- Symmetrical design to achieve a high balancing quality
- Pre-balanced G 2.5 / 35,000 rpm
- Max. true running accuracy < 0.005 mm at 3xD
Clamping key
from 10,40 €
Prices excl. VAT plus shipping costs
- Brand: ALBRECHT
- Article no.: 4431404007
Product description
443140 Micro precision clamping nut AMC DIN ISO 7388-2Micro precision chuck AMC- Ideal for micro-tools
- Clamping range 1.0 to 6.0 mm
- Optional peripheral or central cooling
- Improved damping compared with shrink-fit technology
- Slim protruding contour D1 = 13.5 mm
- Perfect concentricity < 3 µm for 2.5 x D
- Pre-balanced to G 2.5 / 25,000 rpm
DIN ISO 7388-2 AD (JIS B 6339)
from 271,00 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?