Milling
Manufacturer catalogs & special catalogs

HPC end milling cutters

Product finder
Filter by:
Alle Filter anzeigen
PMK
254133 End milling cutter solid carbide 35°/38° UT long, cleared Z=4 HB, TiAlN
  • Brand: SARA®
  • Article no.: 2541330030
Product description
254133 End milling cutter solid carbide 35°/38° UT long, cleared Z=4 HB, TiAlNISO P

End milling cutters
  • With clearance
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Also suitable for dry machining

in stock
from 46,60 €
Prices excl. VAT plus shipping costs
(16) Versions
PMKS
254134 End milling cutter solid carbide 35°/38° UT short Z=4 HB, AlTiN
  • Brand: SARA®
  • Article no.: 2541340030
  • Catalogue page: KS-0453
  • Cutting values: SW-0745
Product description
254134 End milling cutter solid carbide 35°/38° UT short Z=4 HB, AlTiNISO M

Stainless steel end milling cutter
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Specially designed for stainless steel machining

Short
in stock
from 37,00 €
Prices excl. VAT plus shipping costs
(15) Versions
PMKS
254136 End milling cutter solid carbide 35°/38° UT long, cleared Z=4 HB, AlTiN
  • Brand: SARA®
  • Article no.: 2541360030
  • Catalogue page: KS-0454
  • Cutting values: SW-0745
Product description
254136 End milling cutter solid carbide 35°/38° UT long, cleared Z=4 HB, AlTiNISO M

End milling cutters Stainless steel
  • With clearance
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Specially designed for stainless steel machining

in stock
from 46,60 €
Prices excl. VAT plus shipping costs
(15) Versions
PK
254511 End milling cutter solid carbide 35°/38° HB Ultra long
  • Brand: ATORN®
  • Article no.: 2545110100
Product description
254511 End milling cutter solid carbide 35°/38° HB Ultra longHPC Power end milling cutter, steel
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved tool life and stable face cutter, double protected
  • Optimised face-cutter geometry with large chip spaces
  • Radius-shaped face gashing for improved chip removal
  • Defined cutting-edge rounding
  • With clearance
  • ULTRA coated for maximum service life

Long
Directly from the manufacturer
from 77,60 €
Prices excl. VAT plus shipping costs
(6) Versions
PMK
254130 End milling cutter solid carbide 35°/38° UT short Z=4 HB, TiAlN
  • Brand: SARA®
  • Article no.: 2541300030
  • Catalogue page: KS-0445
  • Cutting values: SW-0739
Product description
254130 End milling cutter solid carbide 35°/38° UT short Z=4 HB, TiAlNISO P

End milling cutters
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Also suitable for dry machining

Short
in stock
from 37,00 €
Prices excl. VAT plus shipping costs
(16) Versions
PMK
254132 End milling cutter solid carbide 35°/38° UT XL Z=4 HB, TiAlN
  • Brand: SARA®
  • Article no.: 2541320050
  • Catalogue page: KS-0446
  • Cutting values: SW-0740
Product description
254132 End milling cutter solid carbide 35°/38° UT XL Z=4 HB, TiAlNISO P

End milling cutters
  • With clearance
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Also suitable for dry machining

Extra-long
in stock
from 64,30 €
Prices excl. VAT plus shipping costs
(8) Versions
PMK
254166 End milling cutter solid carbide 35°/38° UT SL long cleared Z=4 HB, TiAlN
  • Brand: SARA®
  • Article no.: 2541660030
  • Catalogue page: KS-0447
  • Cutting values: SW-0740
Product description
254166 End milling cutter solid carbide 35°/38° UT SL long cleared Z=4 HB, TiAlNISO P

End milling cutters
  • With clearance
  • Unequal helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Also suitable for dry machining

extended cutting edge
in stock
from 27,12 €
Prices excl. VAT plus shipping costs
(15) Versions
MS
254168 End milling cutter solid carbide Z4 INOX TiAlN long
  • Brand: SARA®
  • Article no.: 2541680030
  • Catalogue page: KS-0448
  • Cutting values: SW-0747
Product description
254168 End milling cutter solid carbide Z4 INOX TiAlN longISO M

End milling cutter stainless steel
  • Special geometry for stainless steel machining
  • with exemption
  • of unequal twist angles and pitch for low-vibration milling
  • also suitable for dry machining

long with corner radius
in stock
from 34,28 €
Prices excl. VAT plus shipping costs
(11) Versions
MNS
254517 End milling cutter solid carbide 41°/44° HB Ultra long
  • Brand: ATORN®
  • Article no.: 2545170040
Product description
254517 End milling cutter solid carbide 41°/44° HB Ultra longHPC Power end milling cutter, stainless steel
  • Irregular helix angle and pitch for low-vibration milling
  • New edge protection in the form of multi-chamfer grinding
  • Optimised gashing in the centre
  • Micro-cutting preparation on all cutting edges
  • With clearance
  • Wear-resistant and temperature-resistant Ultra-M coating

Directly from the manufacturer
from 56,70 €
Prices excl. VAT plus shipping costs
(7) Versions
PMK
254131 End milling cutter solid carbide 35°/38° UT long Z=4 HB, TiAlN
  • Brand: SARA®
  • Article no.: 2541310030
  • Catalogue page: KS-0445
  • Cutting values: SW-0739
Product description
254131 End milling cutter solid carbide 35°/38° UT long Z=4 HB, TiAlNISO P

End milling cutters
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Also suitable for dry machining

Long
in stock
from 41,90 €
Prices excl. VAT plus shipping costs
(16) Versions
254133 End milling cutter set solid carbide 35°/38° UT long cleared Z=4 HB TiAlN
  • Brand: SARA®
  • Article no.: 2541331005
Product description
254133 End milling cutter set solid carbide 35°/38° UT long cleared Z=4 HB TiAlNISO P

End milling cutters
  • With clearance
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Also suitable for dry machining

End milling cutter set, 5 pcs
subsequent delivery
from 485,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKS
254144 End milling cutter solid carbide 36°/38° Z=4 HA AlTiN
  • Brand: SARA®
  • Article no.: 2541440057
  • Cutting values: SW-0746
Product description
254144 End milling cutter solid carbide 36°/38° Z=4 HA AlTiNDrilling and milling with one tool

Drilling and plunge milling cutter
  • Face geometry for drilling and ramping
  • With clearance
  • Irregular pitch to minimise vibrations
  • High material removal rate
  • High feed rates for plunge milling and groove milling
  • Up to 45° plunge angle
  • Undersized for precise fitting grooves

Standard
in stock
from 48,70 €
Prices excl. VAT plus shipping costs
(9) Versions
PMKNS
254503 End milling cutter solid carbide 33°/35°/38° HB Ultra long
  • Brand: ATORN®
  • Article no.: 2545030050
Product description
254503 End milling cutter solid carbide 33°/35°/38° HB Ultra longHPC Power end milling cutter, universal
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved tool life and stable face cutter, double protected
  • Optimised face-cutter geometry with large chip spaces
  • With clearance
  • ULTRA coated for maximum service life

Directly from the manufacturer
from 49,00 €
Prices excl. VAT plus shipping costs
(7) Versions
PMKS
254135 End milling cutter solid carbide 35°/38° UT long Z=4 HB, AlTiN
  • Brand: SARA®
  • Article no.: 2541350030
Product description
254135 End milling cutter solid carbide 35°/38° UT long Z=4 HB, AlTiNISO M

Stainless steel end milling cutter
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Specially designed for stainless steel machining

Long
in stock
from 40,60 €
Prices excl. VAT plus shipping costs
(13) Versions
PMK
254165 Solid carbide end milling cutters 35°/38° UT long, cleared Z=4 HB, TiAlN
  • Brand: SARA®
  • Article no.: 2541650070
  • Catalogue page: KS-0446
  • Cutting values: SW-0740
Product description
254165 Solid carbide end milling cutters 35°/38° UT long, cleared Z=4 HB, TiAlNISO P

End milling cutters
  • With clearance
  • Unequal helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life
  • Also suitable for dry machining

NEW improved substrate

Standard version
in stock
from 22,84 €
Prices excl. VAT plus shipping costs
(16) Versions
MS
254169 End milling cutter solid carbide Z4 INOX TiAlN long extended cuttingedge
  • Brand: SARA®
  • Article no.: 2541691040
  • Catalogue page: KS-0448
  • Cutting values: SW-0747
Product description
254169 End milling cutter solid carbide Z4 INOX TiAlN long extended cuttingedgeISO M

End milling cutter stainless steel
  • Special geometry for stainless steel machining
  • with exemption
  • of unequal twist angles and pitch for low-vibration milling
  • also suitable for dry machining

extended cutting edge with edge protection chamfer
in stock
from 18,52 €
Prices excl. VAT plus shipping costs
(10) Versions
PMKS
254145 End milling cutter solid carbide 36°/38° Z=4 HB AlTiN
  • Brand: SARA®
  • Article no.: 2541450057
  • Cutting values: SW-0746
Product description
254145 End milling cutter solid carbide 36°/38° Z=4 HB AlTiNDrilling and milling with one tool

Drilling and plunge milling cutter
  • Face geometry for drilling and ramping
  • With clearance
  • Irregular pitch to minimise vibrations
  • High material removal rate
  • High feed rates for plunge milling and groove milling
  • Up to 45° plunge angle
  • Undersized for precise fitting grooves

Standard with driving plane
External stock
from 48,70 €
Prices excl. VAT plus shipping costs
(9) Versions
2205++ End milling cutter solid carbide HPC, Z=4 HB, AlCrN
  • Article no.: 2541270090
Product description
2205++ End milling cutter solid carbide HPC, Z=4 HB, AlCrNMilling
Special article
subsequent delivery
from 72,80 €
Prices excl. VAT plus shipping costs
(1) Versions
PMK
254140 End milling cutter solid carbide 35°/38° Z=4 HB internal cooling, TiAlN
  • Brand: SARA®
  • Article no.: 2541400060
  • Catalogue page: KS-0453
  • Cutting values: SW-0740
Product description
254140 End milling cutter solid carbide 35°/38° Z=4 HB internal cooling, TiAlNEnd milling cutters
  • With internal coolant supply
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved service life

in stock
from 102,50 €
Prices excl. VAT plus shipping costs
(6) Versions
PK
254510 End milling cutter solid carbide 35°/38° HA Ultra long
  • Brand: ATORN®
  • Article no.: 2545100010
Product description
254510 End milling cutter solid carbide 35°/38° HA Ultra longHPC Power end milling cutter, steel
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved tool life and stable face cutter, double protected
  • Optimised face-cutter geometry with large chip spaces
  • Radius-shaped face gashing for improved chip removal
  • Defined cutting-edge rounding
  • With clearance
  • ULTRA coated for maximum service life

Long
Directly from the manufacturer
from 48,60 €
Prices excl. VAT plus shipping costs
(13) Versions
PK
254512 End milling cutter solid carbide 35°/38° HA Ultra extra long
  • Brand: ATORN®
  • Article no.: 2545120060
Product description
254512 End milling cutter solid carbide 35°/38° HA Ultra extra longHPC Power end milling cutter, steel
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved tool life and stable face cutter, double protected
  • Optimised face-cutter geometry with large chip spaces
  • Radius-shaped face gashing for improved chip removal
  • Defined cutting-edge rounding
  • With clearance
  • ULTRA coated for maximum service life

Extra-long
Directly from the manufacturer
from 58,00 €
Prices excl. VAT plus shipping costs
(6) Versions
PK
254513 End milling cutter solid carbide 35°/38° HB Ultra extra long
  • Brand: ATORN®
  • Article no.: 2545130060
Product description
254513 End milling cutter solid carbide 35°/38° HB Ultra extra longHPC Power end milling cutter, steel
  • Irregular helix angle and pitch for low-vibration milling
  • With protective chamfer F for improved tool life and stable face cutter, double protected
  • Optimised face-cutter geometry with large chip spaces
  • Radius-shaped face gashing for improved chip removal
  • Defined cutting-edge rounding
  • With clearance
  • ULTRA coated for maximum service life

Extra-long
Directly from the manufacturer
from 56,00 €
Prices excl. VAT plus shipping costs
(6) Versions
254514 End milling cutter, solid carbide 41°/44° HA Ultra
  • Brand: ATORN®
  • Article no.: 2545140080
Product description
254514 End milling cutter, solid carbide 41°/44° HA UltraHPC Power end milling cutter, stainless steel
  • Irregular helix angle and pitch for low-vibration milling
  • New edge protection in the form of multi-chamfer grinding
  • Optimised gashing in the centre
  • Micro-cutting preparation on all cutting edges
  • With clearance
  • Wear-resistant and temperature-resistant Ultra-M coating

Directly from the manufacturer
from 58,00 €
Prices excl. VAT plus shipping costs
(8) Versions
254515 End milling cutter solid carbide 41°/44° HB Ultra short
  • Brand: ATORN®
  • Article no.: 2545150160
Product description
254515 End milling cutter solid carbide 41°/44° HB Ultra shortHPC Power end milling cutter, stainless steel
  • Irregular helix angle and pitch for low-vibration milling
  • New edge protection in the form of multi-chamfer grinding
  • Optimised gashing in the centre
  • Micro-cutting preparation on all cutting edges
  • With clearance
  • Wear-resistant and temperature-resistant Ultra-M coating

Directly from the manufacturer
from 74,40 €
Prices excl. VAT plus shipping costs
(8) Versions
MNS
254516 End milling cutter solid carbide 41°/44° HA Ultra long
  • Brand: ATORN®
  • Article no.: 2545160100
Product description
254516 End milling cutter solid carbide 41°/44° HA Ultra longHPC Power end milling cutter, stainless steel
  • Irregular helix angle and pitch for low-vibration milling
  • New edge protection in the form of multi-chamfer grinding
  • Optimised gashing in the centre
  • Micro-cutting preparation on all cutting edges
  • With clearance
  • Wear-resistant and temperature-resistant Ultra-M coating

Directly from the manufacturer
from 33,60 €
Prices excl. VAT plus shipping costs
(8) Versions