- Brand: SARA®
- Article no.: 4602750400
- Catalogue page: KS-1279
Product description
460275 SARA Modular multiple clamping device 75 mmModular multi-clamping fixture- Mechanical clamping fixture with a modular design
- Accuracy within 0.02 mm
- Base body made from hardened steel, 60 HRC
- Depending on clamping rail length, fully equipped for clamping four workpieces
- Clamping jaws are 1 mm narrower than the base body, allowing lateral use of the clamp
- Also available with stepped jaws on request, prismatic jaws available as accessories
- Supplied with four tool stops, clamping claws, slot nuts, alignment blocks, lifting screws and a clamping key, one fixed jaw and four intermediate jaws
Slide rail, width 75 mm
from 1.859,00 €
Prices excl. VAT plus shipping costs
- Brand: SARA®
- Article no.: 4602500300
- Catalogue page: KS-1279
Product description
460250 SARA Modular multiple clamping device 50 mmModular multi-clamping fixture- Mechanical clamping fixture with a modular design
- Accuracy within 0.02 mm
- Base body made from hardened steel, 60 HRC
- Depending on clamping rail length, fully equipped for clamping four workpieces
- Clamping jaws are 1 mm narrower than the base body, allowing lateral use of the clamp
- Also available with stepped jaws on request, prismatic jaws available as accessories
- Supplied with four tool stops, clamping claws, slot nuts, alignment blocks, lifting screws and a clamping key, one fixed jaw and four intermediate jaws
Slide rail, width 50 mm
from 1.419,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4640012050
- Catalogue page: KS-1277
Product description
464001 ATORN® Multi-clamping side rail with jawsModular multi-clamping fixture- Quick and precise workpiece clamping on vertical and horizontal machining centres, milling and grinding machines
- Standard clamping device for different workpieces
- Wedge clamps of various sizes can be used
- Allows different workpieces to be clamped in extremely confined spaces
- Multiple slide rails combined by means of a connection system, optimum length adjustment to the work table
- Tombstones available on request
- 60° toothing
Particular benefits:- Perform numerous clamping tasks with one clamping system
- Can also be used on ATORN zero-point clamping systems
- All system components are compatible
- Easy-to-install stop system
- Cost-effective clamping system
Multi-clamping slide rail sets- Rail-mounted clamping elements
- Other combinations available on request
from 1.120,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4640022050
- Catalogue page: KS-1278
Product description
464002 ATORN® Multi-clamping side rail without jawsModular multi-clamping fixture- Quick and precise workpiece clamping on vertical and horizontal machining centres, milling and grinding machines
- Standard clamping device for different workpieces
- Wedge clamps of various sizes can be used
- Allows different workpieces to be clamped in extremely confined spaces
- Multiple slide rails combined by means of a connection system, optimum length adjustment to the work table
- Tombstones available on request
- 60° toothing
Particular benefits:- Perform numerous clamping tasks with one clamping system
- Can also be used on ATORN zero-point clamping systems
- All system components are compatible
- Easy-to-install stop system
- Cost-effective clamping system
Multi-clamping slide rails, individual
from 780,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4640100011
- Catalogue page: KS-1277
Product description
464010 Accessories for clamping rail 120 mmModular multi-clamping fixture 120 mm- Extremely high basic rigidity
- Clamp force 40 kN
- Compatible with 50 mm and 80 mm slide rails
- All standard wedge clamps and jaws suitable
- Extendable to all required lengths
Accessories for clamping rail 120 mm
from 3,68 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641001230
- Catalogue page: KS-1274
Product description
464100 Slide rails set 120 mm, without jaws5-axis slide rail set 120 mm- For stable, low-vibration machining
- 40 kN clamping force at 85 Nm tightening torque
- Form-fit jaw connection
- Coated spindle and spindle nut
- Spindle can be extended without tools
- Extendable to all required lengths (extensions included)
- Retooling in seconds
- Extensive range of accessories and jaws
Slide rail set 120 mm, without jaws
from 2.699,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641011230
- Catalogue page: KS-1274
Product description
464101 Slide rails set 120 mm, with jaws5-axis slide rail set 120 mm- For stable, low-vibration machining
- 40 kN clamping force at 85 Nm tightening torque
- Form-fit jaw connection
- Coated spindle and spindle nut
- Spindle can be extended without tools
- Extendable to all required lengths (extensions included)
- Retooling in seconds
- Extensive range of accessories and jaws
Slide rail set 120 mm, with jaws
from 3.499,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641021220
- Catalogue page: KS-1274
Product description
464102 Slide rail 120 wide 80 high without body5-axis slide rail set 120 mm- For stable, low-vibration machining
- 40 kN clamping force at 85 Nm tightening torque
- Form-fit jaw connection
- Coated spindle and spindle nut
- Spindle can be extended without tools
- Extendable to all required lengths (extensions included)
- Retooling in seconds
- Extensive range of accessories and jaws
Slide rail 120 mm wide 80 mm high without body
from 940,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641031205
- Catalogue page: KS-1274
Product description
464103 Accessories for 5-axis body5-axis slide rail set 120 mm- For stable, low-vibration machining
- 40 kN clamping force at 85 Nm tightening torque
- Form-fit jaw connection
- Coated spindle and spindle nut
- Spindle can be extended without tools
- Extendable to all required lengths (extensions included)
- Retooling in seconds
- Extensive range of accessories and jaws
Accessories for 5-axis body
from 106,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641041204
- Catalogue page: KS-1275
Product description
464104 Clamping jaws for 5-axis body5-axis slide rail set 120 mm- For stable, low-vibration machining
- 40 kN clamping force at 85 Nm tightening torque
- Form-fit jaw connection
- Coated spindle and spindle nut
- Spindle can be extended without tools
- Extendable to all required lengths (extensions included)
- Retooling in seconds
- Extensive range of accessories and jaws
Clamping jaws for 5-axis body
from 206,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641051502
- Catalogue page: KS-1275
Product description
464105 Pendulum jaws for 5-axis structure5-axis slide rail set 120 mm- For stable, low-vibration machining
- 40 kN clamping force at 85 Nm tightening torque
- Form-fit jaw connection
- Coated spindle and spindle nut
- Spindle can be extended without tools
- Extendable to all required lengths (extensions included)
- Retooling in seconds
- Extensive range of accessories and jaws
Pendulum jaws with accessories for 5-axis body
from 52,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641060002
- Catalogue page: KS-1275
Product description
464106 Screw-in jaws for clamping jaws5-axis slide rail set 120 mm- For stable, low-vibration machining
- 40 kN clamping force at 85 Nm tightening torque
- Form-fit jaw connection
- Coated spindle and spindle nut
- Spindle can be extended without tools
- Extendable to all required lengths (extensions included)
- Retooling in seconds
- Extensive range of accessories and jaws
Screw-in jaws for clamping jaws
from 24,80 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641070644
- Catalogue page: KS-1275
Product description
464107 Parallel supports, ground5-axis slide rail set 120 mm- For stable, low-vibration machining
- 40 kN clamping force at 85 Nm tightening torque
- Form-fit jaw connection
- Coated spindle and spindle nut
- Spindle can be extended without tools
- Extendable to all required lengths (extensions included)
- Retooling in seconds
- Extensive range of accessories and jaws
Parallel supports, ground
from 57,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641081220
- Catalogue page: KS-1276
Product description
464108 Slide rails set 120 mm with smooth clamping surfaceModular multi-clamping fixture 120 mm- Extremely high basic rigidity
- Clamp force 40 kN
- Compatible with 50 mm and 80 mm slide rails
- All standard wedge clamps and jaws suitable
- Extendable to all required lengths
With smooth clamping surface- Supplied with: 1x slide rail, 1x fixed jaw, 1x wedge clamp with fixed jaws
from 1.499,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641091220
- Catalogue page: KS-1276
Product description
464109 Slide rails set 120 mm with 3 mm step and clawModular multi-clamping fixture 120 mm- Extremely high basic rigidity
- Clamp force 40 kN
- Compatible with 50 mm and 80 mm slide rails
- All standard wedge clamps and jaws suitable
- Extendable to all required lengths
With 3 mm step and claw- Supplied with: 1x slide rail, 1x fixed jaw, 1x wedge clamp with fixed jaws
from 1.620,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641101220
- Catalogue page: KS-1276
Product description
464110 Slide rails set 120 mm ribbed versionModular multi-clamping fixture 120 mm- Extremely high basic rigidity
- Clamp force 40 kN
- Compatible with 50 mm and 80 mm slide rails
- All standard wedge clamps and jaws suitable
- Extendable to all required lengths
Grooved design- Supplied with: 1x slide rail, 1x fixed jaw, 1x wedge clamp with fixed jaws
from 1.620,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641111201
- Catalogue page: KS-1276
Product description
464111 Wedge clamp 120 mmModular multi-clamping fixture 120 mm- Extremely high basic rigidity
- Clamp force 40 kN
- Compatible with 50 mm and 80 mm slide rails
- All standard wedge clamps and jaws suitable
- Extendable to all required lengths
Wedge clamp 120 mm- For use with 50 mm and 80 mm slide rails, a slot nut art.no. 4640100009, a screw bushing art.no. 4640100012 and a screw M12 must be used
from 394,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641121201
- Catalogue page: KS-1276
Product description
464112 Wedge clamp with fixed jaw 120 mmModular multi-clamping fixture 120 mm- Extremely high basic rigidity
- Clamp force 40 kN
- Compatible with 50 mm and 80 mm slide rails
- All standard wedge clamps and jaws suitable
- Extendable to all required lengths
Wedge clamp with fixed jaw 120 mm- For use with 50 mm and 80 mm slide rails, 2x slot nut art.no. 4640100009, 2x screw bushing art.no. 4640100012 and 2x screw M12 must be used
from 394,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4641131201
- Catalogue page: KS-1277
Product description
464113 Fixed jaw 120 mmModular multi-clamping fixture 120 mm- Extremely high basic rigidity
- Clamp force 40 kN
- Compatible with 50 mm and 80 mm slide rails
- All standard wedge clamps and jaws suitable
- Extendable to all required lengths
Fixed jaw 120 mm- For use with 50 mm and 80 mm slide rails, 2x slot nut art.no. 4640100009, 2x screw bushing art.no. 4640100012 and 2x screw M12 must be used
from 222,00 €
Prices excl. VAT plus shipping costs
- Article no.: 4643098030
- Catalogue page: KS-1279
Product description
464309 Modular multi-slot ALU clamping rail with step and clawAluminium multi-clamping device setThe
ATORN aluminium slide rail offers a reduction in weight of 55% compared to the steel version.
At the same time, the basic rigidity is maintained and system flexibility is not limited.
The rail is designed for low weight, compatibility with existing clamping components and straightforward handling.
Features of the aluminium slide rail:- Very good basic rigidity for stable clamping
- Flexible use in single and multiple clamping systems
- Compatibility with all standard clamping wedges and clamping jaws
- Preparation for automation already integrated
- Modular extension to various lengths
- Can be used with standard clamping adapters with a pitch of 200 mm
from 1.559,00 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?