- Brand: ATORN®
- Article no.: 4591000175
Product description
459100 5-Axle clamp set 5-AX 175 T-slot5AX100 and 3AX100 5-axle clamping system- High clamping force (up to 42 kN) exactly where it is needed – due to the feed rod integrated directly below the workpiece support
- No widening of the clamping jaws under load, no distortion of the work table
- Allows maximum cutting forces due to extreme rigidity
- The low clamping depth of 8 mm enables 5-sided machining without any protruding edges
- Wide variety of clamping widths possible simply by moving the two jaws; options are limited only by the size of the work table
- Clamps raw parts, machined parts, round and irregularly shaped parts
- Positive-fit clamping with no knockout
- 5 AX 100 can be set up on T-slot panels and tables, perforated grid plates and dedicated fixtures
- Jaw width 100 mm
- Supplied complete, without fixing or stop sets
5AX for slot spacing 63 - 126 mm5AX100 and 3AX100 5-axle clamping system- High clamping force (up to 42 kN) exactly where it is needed – due to the feed rod integrated directly below the workpiece support
- No widening of the clamping jaws under load, no distortion of the work table
- Allows maximum cutting forces due to extreme rigidity
- The low clamping depth of 8 mm enables 5-sided machining without any protruding edges
- Wide variety of clamping widths possible simply by moving the two jaws; options are limited only by the size of the work table
- Clamps raw parts, machined parts, round and irregularly shaped parts
- Positive-fit clamping with no knockout
- 5 AX 100 can be set up on T-slot panels and tables, perforated grid plates and dedicated fixtures
- Jaw width 100 mm
- Supplied complete, without fixing or stop sets
5AX for slot spacing 63 - 126 mm
from 1.839,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4595000125
- Catalogue page: KS-1268
Product description
459500 5-Axle compact clamp5-axis compact clamp- Body made from ductile iron, GJS 600
- Guideways hardened and ground
- Clamping force 40 kN at 110 Nm
- Patented quick adjustment of the clamping width
- Enclosed spindle
- Secure holding forces due to re-tensioning spring package
- Supplied without crank or torque wrench
- Suitable torque wrench: article no. 702602 0004 (to be used without sockets)
Base body incl. clamping claws5-axis compact clamp- Body made from ductile iron, GJS 600
- Guideways hardened and ground
- Clamping force 40 kN at 110 Nm
- Patented quick adjustment of the clamping width
- Enclosed spindle
- Secure holding forces due to re-tensioning spring package
- Supplied without crank or torque wrench
- Suitable torque wrench: article no. 702602 0004 (to be used without sockets)
Base body incl. clamping claws
from 1.729,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4597000070
- Catalogue page: KS-1268
Product description
459700 5-Axis clamping system TCA705-axis clamping system TCA70With central clamp for 5-sided machining. Thanks to the design and central telescopic spindles, the protruding contours remain unchanged regardless of the clamp width. Excellent accessibility of all sides is guaranteed. The series-standard quick-change jaw system reduces tooling times and increases flexibility.
- Ideal for use on 5-axis machining centres
- Conventional clamping and grip clamping possible
- Telescopic spindle, protruding contour remains unchanged
- Central, simple programming without zero offset
- Material allowance is distributed symmetrically
- Repetition precision 0.01 mm
- Centring accuracy 0.02 mm
- Workpiece accessibility irrespective of the clamp width
- Symmetrical design = workpiece remains central and parallel
- Workpiece support height = 192 mm
- Quick-change jaw system, tool-free jaw changing thanks to quick-release lock
- Reversible jaws: for min. / max. clamp width with one pair of jaws
- Constant clamp force thanks to low-maintenance telescopic spindle
- Supplied as standard with locating bores for zero-point clamping system, pitch 200 mm
- Work table attachment also with through-bolts / fitting screws
- In 50 / 63 mm grid or clamping claws
- Integrated scale ring for fine adjustment of the central position
- Clamp force 30 kN at 45 Nm linear
- Operation with torque wrenches
- Supplied with
1 ATORN TCA70 without jaws
1 support plate for transportation
1 hand crank for pre-setting
Please order clamping jaws separately
5-axis clamping system TCA70With central clamp for 5-sided machining. Thanks to the design and central telescopic spindles, the protruding contours remain unchanged regardless of the clamp width. Excellent accessibility of all sides is guaranteed. The series-standard quick-change jaw system reduces tooling times and increases flexibility.
- Ideal for use on 5-axis machining centres
- Conventional clamping and grip clamping possible
- Telescopic spindle, protruding contour remains unchanged
- Central, simple programming without zero offset
- Material allowance is distributed symmetrically
- Repetition precision 0.01 mm
- Centring accuracy 0.02 mm
- Workpiece accessibility irrespective of the clamp width
- Symmetrical design = workpiece remains central and parallel
- Workpiece support height = 192 mm
- Quick-change jaw system, tool-free jaw changing thanks to quick-release lock
- Reversible jaws: for min. / max. clamp width with one pair of jaws
- Constant clamp force thanks to low-maintenance telescopic spindle
- Supplied as standard with locating bores for zero-point clamping system, pitch 200 mm
- Work table attachment also with through-bolts / fitting screws
- In 50 / 63 mm grid or clamping claws
- Integrated scale ring for fine adjustment of the central position
- Clamp force 30 kN at 45 Nm linear
- Operation with torque wrenches
- Supplied with
1 ATORN TCA70 without jaws
1 support plate for transportation
1 hand crank for pre-setting
Please order clamping jaws separately
from 3.539,00 €
Prices excl. VAT plus shipping costs
- Article no.: 4597150070
- Catalogue page: KS-1269
Product description
459715 Clamp width adapterAccessories for 5-axis clamping system TCA70Clamp width adapter- Suitable for TCA70-M
- Clamp width reduction from 9 mm
- Made from case-hardened steel (burnished)
Accessories for 5-axis clamping system TCA70Clamp width adapter- Suitable for TCA70-M
- Clamp width reduction from 9 mm
- Made from case-hardened steel (burnished)
from 275,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4598000100
Product description
459800 ATORN 5-axis combination clamp AZS-1005-axis combination clamp AZS-100- Centring vice and fixed jaw clamp in one
- quick and easy spindle retooling
- mechanical clamping system
- high clamp force with low tightening torque
- very high basic rigidity, allows low-vibration machining
- all guide surfaces hardened and ground
- integrated boreholes for zero-point clamping systems
Adapter available on request - Clamp force data and scaling for guidance on basic body
- extensive jaw range
- Supplied with 1 x grip jaw set 3.5mm, 1 short shaft and 4 clamping jaws
Combination clamp AZS-1005-axis combination clamp AZS-100- Centring vice and fixed jaw clamp in one
- quick and easy spindle retooling
- mechanical clamping system
- high clamp force with low tightening torque
- very high basic rigidity, allows low-vibration machining
- all guide surfaces hardened and ground
- integrated boreholes for zero-point clamping systems
Adapter available on request - Clamp force data and scaling for guidance on basic body
- extensive jaw range
- Supplied with 1 x grip jaw set 3.5mm, 1 short shaft and 4 clamping jaws
Combination clamp AZS-100
from 4.259,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4598010104
Product description
459801 Top jaws for AZS-100Accessories for ATORN combination clamp AZS-100
Top jaws for AZS-100
Accessories for ATORN combination clamp AZS-100
Top jaws for AZS-100
from 238,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4598030101
Product description
459803 Grip jaw for carbide insertsAccessories for ATORN combination clamp AZS-100
Grip jaw for carbide inserts
Accessories for ATORN combination clamp AZS-100
Grip jaw for carbide inserts
from 328,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4598040100
Product description
459804 Workpiece stopAccessories for ATORN combination clamp AZS-100
Workpiece stop
Accessories for ATORN combination clamp AZS-100
Workpiece stop
from 63,70 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4598050012
Product description
459805 Alignment pin for AZS-100Accessories for ATORN combination clamp AZS-100
Alignment pin for AZS-100
Accessories for ATORN combination clamp AZS-100
Alignment pin for AZS-100
from 205,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4598060017
Product description
459806 Clamping jawsAccessories for ATORN combination clamp AZS-100Clamping clawsAccessories for ATORN combination clamp AZS-100Clamping claws
from 143,50 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4598070012
Product description
459807 T-slot nut and screw for T-slotAccessories for ATORN combination clamp AZS-100Slot nut and screw for T-slotAccessories for ATORN combination clamp AZS-100Slot nut and screw for T-slot
from 139,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4598100125
- Catalogue page: KS-1271
Product description
459810 5-axis clamp AVM-1255-axis clamp AVM-125The ATORN-AVM 125 is a manually mechanically actuated component clamp without power transmission for clamping workpieces made of all conventional materials.
It is designed as a 5-axis clamp with a fixed and a movable jaw.
The fixed jaw can be adjusted and clamped using a clamping screw and offers optimal accessibility and flexible application options.
These properties facilitate the precise transfer of machine accuracy to the workpiece.
- Manual workpiece clamp for 5-axis machining
- Large clamping range of up to 195 mm for machining workpieces of various sizes and geometries
- High accuracy transfer from the machine to the workpiece
- Good accessibility (low interference contour)
- Easy handling and cleaning
- Bearing-supported spindle for clamping force generation
- High clamping force (40kN at 100Nm tightening torque)
- Central clamping screw for loosening and locking of the fixed base jaw on the base rail
- Base body with scale for adjustment and pre-positioning of the fixed base jaw
- Quick clamping range adjustment through jaw quick-change system reduces set-up times
5-axis clamp AVM-125- Supplied without clamping jaws
from 2.995,00 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?