- Brand: KITAGAWA
- Article no.: 4101010206
- Catalogue page: KS-1134
Product description
410101 Turning jaws wedge hook power clamping nut B-200Wedge hook power chuck B/BT-200- Model B/BT-200
- Large through-hole
- All-steel design
- Hardened and ground guides
- High true-running accuracy
- Lubrication fitting in every base jaw
- Centre mount in accordance with DIN 6353
- Supplied without flange and without top jaws; includes 1.5 mm x 60° toothed base jaws, T-slot nuts, chuck and jaw fastening screws, unthreaded drawbar nuts, special assembly key
- Further sizes and models available on request
- Threaded drawbar nuts available on request
3-jaw version
from 2.129,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4101021006
- Catalogue page: KS-1134
Product description
410102 (klasse)Wedge hook power chuck BR- Model BR / successor model to the BB-200 series
- Enlarged clearance
- Repetition precision of below 10 µm
Repetition precision of below 10 µm can be achieved when used with T-Nut-Plus slot nuts and Kitagawa SB jaws. Turned soft jaws for different clamping diameters can thus be exchanged with accuracy. This saves time and money! - Patented base jaw: up to 10 % increased clamp force at maximum rotational speeds
- Solid steel design
- Hardened and ground guides
- High true running accuracy
- Lubrication nipple in every base jaw
- Centre mount in accordance with DIN 6353
- Supplied without flange, without top jaws; supplied with 1.5 mm x 60° toothed base jaws, standard T-slot nuts, chuck and jaw fastening screws, unthreaded drawbar nuts and a special assembly key
- Threaded drawbar nuts and BR 12 available on request
3-jaw version
from 2.959,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4150300006
- Catalogue page: KS-1138
Product description
415030 Collet chuck power-operated CRL-60 according to DIN 55026CRL power-operated collet chuck- All-steel design, hardened and precision-ground
- For multi-range and steel collets in accordance with DIN 6343, 173 E or 185 E
- 2 sizes: up to material Ø 42 mm, or up to material Ø 60 mm
- Other sizes for a maximum material Ø 36 mm, 54 mm and 66 mm are available on request
- Equipped for use with a length stop, but only in combination with multi-range collets.
- For bar work on CNC lathes
- Especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded)
- Without collets
- Threaded drawbar nuts available on request
CRL-60 for 185E dead-length collets
from 1.560,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4050200008
Product description
405020 Turning jaws wedge hook power clamping nut QJRPower chuck with quick-change jaw system- Model QJR
- Quick-change jaw system
- All-steel design
- Hardened and ground guides
- High true-running accuracy
- Centre mount in accordance with DIN 6353
- B-200 and BB-200 series can be replaced without difficulty by the QJR series
- Existing top jaws from the B-200 and BB-200 series can be used
- Supplied without base jaws, top jaws or flange
- Drawbar nut with no thread
- Threaded drawbar nuts available on request
Power chucks
from 4.409,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4101040006
- Catalogue page: KS-1136
Product description
410104 KFJ 4-jaw versionWedge hook power chuck KFJ / KFJB-200- Model KFJ/KFJB-200
- With large through-hole
- All-steel design
- Hardened and ground guides
- High true-running accuracy
- Lubrication fitting in every base jaw
- Centre mount in accordance with DIN 6353
- Supplied without top jaws, with 1.5 mm x 60° toothed base jaws, T-slot nuts, chuck and jaw fastening screws, unthreaded drawbar nuts and a special assembly key
- Threaded drawbar nuts available on request
KFJ-200 4-jaw version
from 3.609,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4101100208
- Catalogue page: KS-1134
Product description
410110 Two-jaw wedge hook power clamping nut BT-200Wedge hook power chuck B/BT-200- Model B/BT-200
- Large through-hole
- All-steel design
- Hardened and ground guides
- High true-running accuracy
- Lubrication fitting in every base jaw
- Centre mount in accordance with DIN 6353
- Supplied without flange and without top jaws; includes 1.5 mm x 60° toothed base jaws, T-slot nuts, chuck and jaw fastening screws, unthreaded drawbar nuts, special assembly key
- Further sizes and models available on request
- Threaded drawbar nuts available on request
2-jaw version
from 3.349,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4102040006
- Catalogue page: KS-1136
Product description
410204 KFJB 4-jaw versionWedge hook power chuck KFJ / KFJB-200- Model KFJ/KFJB-200
- With large through-hole
- All-steel design
- Hardened and ground guides
- High true-running accuracy
- Lubrication fitting in every base jaw
- Centre mount in accordance with DIN 6353
- Supplied without top jaws, with 1.5 mm x 60° toothed base jaws, T-slot nuts, chuck and jaw fastening screws, unthreaded drawbar nuts and a special assembly key
- Threaded drawbar nuts available on request
KFJB-200 4-jaw version
from 3.999,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4150010001
- Catalogue page: KS-1138
Product description
415001 Collet chuck power-operated CRL-42 with cylindrical centring fixtureCRL power-operated collet chuck- All-steel design, hardened and precision-ground
- For multi-range and steel collets in accordance with DIN 6343, 173 E or 185 E
- 2 sizes: up to material Ø 42 mm, or up to material Ø 60 mm
- Other sizes for a maximum material Ø 36 mm, 54 mm and 66 mm are available on request
- Equipped for use with a length stop, but only in combination with multi-range collets.
- For bar work on CNC lathes
- Especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded)
- Without collets
- Threaded drawbar nuts available on request
CRL-42 for 173E dead-length collets
from 1.090,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4150100005
- Catalogue page: KS-1138
Product description
415010 Collet chuck power-operated CRL-42 according to DIN 55026CRL power-operated collet chuck- All-steel design, hardened and precision-ground
- For multi-range and steel collets in accordance with DIN 6343, 173 E or 185 E
- 2 sizes: up to material Ø 42 mm, or up to material Ø 60 mm
- Other sizes for a maximum material Ø 36 mm, 54 mm and 66 mm are available on request
- Equipped for use with a length stop, but only in combination with multi-range collets.
- For bar work on CNC lathes
- Especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded)
- Without collets
- Threaded drawbar nuts available on request
CRL-42 for 173E dead-length collets
from 1.150,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4150200001
- Catalogue page: KS-1138
Product description
415020 Collet chuck power-operated CRL-60 with cylindrical centring fixtureCRL power-operated collet chuck- All-steel design, hardened and precision-ground
- For multi-range and steel collets in accordance with DIN 6343, 173 E or 185 E
- 2 sizes: up to material Ø 42 mm, or up to material Ø 60 mm
- Other sizes for a maximum material Ø 36 mm, 54 mm and 66 mm are available on request
- Equipped for use with a length stop, but only in combination with multi-range collets.
- For bar work on CNC lathes
- Especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded)
- Without collets
- Threaded drawbar nuts available on request
CRL-60 for 185E dead-length collets
from 1.560,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4151010001
- Catalogue page: KS-1138
Product description
415101 Collet chuck power-operated QCRL-42 w. cylindrical centring fixtureQCRL / QD-CRL power-operated collet chuck- Model QD-CRL comes without a flange - direct short taper holding fixture included
- Bayonet fixing allows collets to be changed quickly
- For Ø 42 mm (173E) up to Ø 60 mm (185E), version up to Ø 80 mm (193E) and
- collet reducer from 185E to 173E available on request
- For bar work on CNC lathes, especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded), without collets
- Threaded drawbar nuts available on request
QCRL-42 for 173E dead-length colletsQCRL / QD-CRL power-operated collet chuck- Model QD-CRL comes without a flange - direct short taper holding fixture included
- Bayonet fixing allows collets to be changed quickly
- For Ø 42 mm (173E) up to Ø 60 mm (185E), version up to Ø 80 mm (193E) and
- collet reducer from 185E to 173E available on request
- For bar work on CNC lathes, especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded), without collets
- Threaded drawbar nuts available on request
QCRL-42 for 173E dead-length collets- Rod seal, 3-piece set, Article no. 4152103175
from 1.249,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4151101005
- Catalogue page: KS-1138
Product description
415110 Collet chuck power-operated QCRL-42 according to DIN 55026QCRL / QD-CRL power-operated collet chuck- Model QD-CRL comes without a flange - direct short taper holding fixture included
- Bayonet fixing allows collets to be changed quickly
- For Ø 42 mm (173E) up to Ø 60 mm (185E), version up to Ø 80 mm (193E) and
- collet reducer from 185E to 173E available on request
- For bar work on CNC lathes, especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded), without collets
- Threaded drawbar nuts available on request
QCRL-42 for 173E dead-length colletsQCRL / QD-CRL power-operated collet chuck- Model QD-CRL comes without a flange - direct short taper holding fixture included
- Bayonet fixing allows collets to be changed quickly
- For Ø 42 mm (173E) up to Ø 60 mm (185E), version up to Ø 80 mm (193E) and
- collet reducer from 185E to 173E available on request
- For bar work on CNC lathes, especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded), without collets
- Threaded drawbar nuts available on request
QCRL-42 for 173E dead-length collets- Rod seal, 3-piece set, Article no. 4152103175
from 495,60 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4151200001
- Catalogue page: KS-1138
Product description
415120 Collet chuck power-operated QCRL-60 w. cylindrical centring fixtureQCRL / QD-CRL power-operated collet chuck- Model QD-CRL comes without a flange - direct short taper holding fixture included
- Bayonet fixing allows collets to be changed quickly
- For Ø 42 mm (173E) up to Ø 60 mm (185E), version up to Ø 80 mm (193E) and
- collet reducer from 185E to 173E available on request
- For bar work on CNC lathes, especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded), without collets
- Threaded drawbar nuts available on request
QCRL-60 for 185E dead-length colletsQCRL / QD-CRL power-operated collet chuck- Model QD-CRL comes without a flange - direct short taper holding fixture included
- Bayonet fixing allows collets to be changed quickly
- For Ø 42 mm (173E) up to Ø 60 mm (185E), version up to Ø 80 mm (193E) and
- collet reducer from 185E to 173E available on request
- For bar work on CNC lathes, especially for high speeds and true-running accuracies
- Supplied with chuck fastening screws and thrust collar (unthreaded), without collets
- Threaded drawbar nuts available on request
QCRL-60 for 185E dead-length collets- Rod seal set 3 pieces Article no. 4152103185
from 1.570,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4152010006
- Catalogue page: KS-1141
Product description
415201 Power operated collet chuck DHPDHP power-operated collet chuck- Model DHP65
- Compact design
- High accuracy
- Ideal for use in initial machining due to axial tension
- Fully compatible with commercially available 65 mm clamping heads
- Easily adaptable to existing machinery
- DHP65 chucks are lightweight and can be fitted quickly
- Supplied without collets or changing fixtures; includes blank unthreaded drawbar nut
- Additional chucks available on request
- Threaded drawbar nuts available on request
Clamping Ø max. 65 mmDHP power-operated collet chuck- Model DHP65
- Compact design
- High accuracy
- Ideal for use in initial machining due to axial tension
- Fully compatible with commercially available 65 mm clamping heads
- Easily adaptable to existing machinery
- DHP65 chucks are lightweight and can be fitted quickly
- Supplied without collets or changing fixtures; includes blank unthreaded drawbar nut
- Additional chucks available on request
- Threaded drawbar nuts available on request
Clamping Ø max. 65 mm- for clamping head size 65
from 1.249,00 €
Prices excl. VAT plus shipping costs
- Brand: KITAGAWA
- Article no.: 4152045206
Product description
415204 DKF (Fix, collet chuck, power operatedPower-operated collet chuck DKF- Model DKF65: clamp Ø max. 65 mm
- Compact design
- High precision
- Clamping without changing the axial position of the clamping head
- Ideal for bar stock, secondary machining or inserts on a main or counter spindle
- Fully compatible with commercially available 65 mm clamping heads
- Easily adaptable to existing machinery
- Supplied without collets and switching equipment, includes blank unthreaded drawbar nut
- Threaded drawbar nuts available on request
DKF 65- For clamping head size 65
from 1.879,00 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?