HSS reamers

Product finder

Filter by:

PMKNS

161010 NC machine reamer HSS-E similar to DIN212D H7

Brand: ATORN®
Article no.: 1610100040
Catalogue page: KS-0331
Cutting values: SW-0409

Product description

161010 NC machine reamer HSS-E similar to DIN212D H7NC machine reamers

For H7 fit
Right-hand cutting
Cutting material: HSS-E
Straight shank without square end
Form D: spiral-fluted with offset shank
To ensure maximum true running accuracy for use in hydraulic expansion chucks and high-precision chucks, these reamers are delivered with even shank diameters suitable
for reaming through-holes and blind holes
Also available in TiN-coated version

Single
NC machine reamers

For H7 fit
Right-hand cutting
Cutting material: HSS-E
Straight shank without square end
Form D: spiral-fluted with offset shank
To ensure maximum true running accuracy for use in hydraulic expansion chucks and high-precision chucks, these reamers are delivered with even shank diameters suitable
for reaming through-holes and blind holes
Also available in TiN-coated version

Single

from 18,20 €

Prices excl. VAT plus shipping costs

(19) Versions

PMKNS

161001 NC machine reamer set 7 pieces, HSS-E DIN212D 3.00-12.00 mm H7

Brand: ATORN®
Article no.: 1610011007

Product description

161001 NC machine reamer set 7 pieces, HSS-E DIN212D 3.00-12.00 mm H7NC machine reamers

For H7 fit
Right-hand cutting
Cutting material: HSS-E
Straight shank without square end
Form D: spiral-fluted with offset shank
To ensure maximum true running accuracy for use in hydraulic expansion chucks and high-precision chucks, these reamers are delivered with even shank diameters suitable
for reaming through-holes and blind holes
Also available in TiN-coated version

Sets
NC machine reamers

For H7 fit
Right-hand cutting
Cutting material: HSS-E
Straight shank without square end
Form D: spiral-fluted with offset shank
To ensure maximum true running accuracy for use in hydraulic expansion chucks and high-precision chucks, these reamers are delivered with even shank diameters suitable
for reaming through-holes and blind holes
Also available in TiN-coated version

Sets

from 269,00 €

Prices excl. VAT plus shipping costs

(1) Versions

PKN

161002 Machine reamer HSS-E WN form B H7 cylindrical,

Brand: ATORN®
Article no.: 1610020060
Catalogue page: KS-0330
Cutting values: SW-0409

Product description

161002 Machine reamer HSS-E WN form B H7 cylindrical,Machine reamers

Type B with offset shank up to Ø 2.8 mm
Type D with offset shank up to Ø 2.9 mm
For H7 fit
Right-hand cutting, straight shank
Manufacturing tolerances in accordance with DIN 1420
Ground chip-space version
Cutting material: HSS-E
For reaming through-holes

Long, company standard
Machine reamers

Type B with offset shank up to Ø 2.8 mm
Type D with offset shank up to Ø 2.9 mm
For H7 fit
Right-hand cutting, straight shank
Manufacturing tolerances in accordance with DIN 1420
Ground chip-space version
Cutting material: HSS-E
For reaming through-holes

Long, company standard

from 74,90 €

Prices excl. VAT plus shipping costs

(8) Versions

PKN

161003 Machine reamer HSS-E WN form B H7 cylindrical

Brand: ATORN®
Article no.: 1610030080
Catalogue page: KS-0330
Cutting values: SW-0409

Product description

161003 Machine reamer HSS-E WN form B H7 cylindricalMachine reamers

Type B with offset shank up to Ø 2.8 mm
Type D with offset shank up to Ø 2.9 mm
For H7 fit
Right-hand cutting, straight shank
Manufacturing tolerances in accordance with DIN 1420
Ground chip-space version
Cutting material: HSS-E
For reaming through-holes

Extra-long, company standard
Machine reamers

Type B with offset shank up to Ø 2.8 mm
Type D with offset shank up to Ø 2.9 mm
For H7 fit
Right-hand cutting, straight shank
Manufacturing tolerances in accordance with DIN 1420
Ground chip-space version
Cutting material: HSS-E
For reaming through-holes

Extra-long, company standard

from 208,00 €

Prices excl. VAT plus shipping costs

(7) Versions

PMKNS

161006 Machine reamer HSS-E WN form B 1 H7 MK

Brand: ATORN®
Article no.: 1610060140
Catalogue page: KS-0333
Cutting values: SW-0409

Product description

161006 Machine reamer HSS-E WN form B 1 H7 MKMachine reamer with MT shank

Type B for H7 fit
Right-hand cutting
Morse taper
Spiral-fluted, short 45° chamfer
Even ridge count with irregular pitch for chatter-free bore reaming
Cutting material: HSS-E
For reaming through-holes, chip removal in the cutting direction, suitable for blind bores due to short chamfer

Long, company standard type D

10° left-hand twist

Machine reamer with MT shank

Type B for H7 fit
Right-hand cutting
Morse taper
Spiral-fluted, short 45° chamfer
Even ridge count with irregular pitch for chatter-free bore reaming
Cutting material: HSS-E
For reaming through-holes, chip removal in the cutting direction, suitable for blind bores due to short chamfer

Long, company standard type D

10° left-hand twist

from 143,50 €

Prices excl. VAT plus shipping costs

(10) Versions

PMKNS

160110 Hand reamer HSS, adjustable

Brand: ATORN®
Article no.: 1601100090

Product description

160110 Hand reamer HSS, adjustableSets available on request

Quick-adjustment hand reamers

Right-hand cutting
Straight shank and square end
Large adjusting range, fine adjustment with ring gauges or micrometre
Cutting material: HSS
For repair work that does not require narrow fit tolerances, and for intermediate dimensions

Sets available on request

Quick-adjustment hand reamers

Right-hand cutting
Straight shank and square end
Large adjusting range, fine adjustment with ring gauges or micrometre
Cutting material: HSS
For repair work that does not require narrow fit tolerances, and for intermediate dimensions

from 112,00 €

Prices excl. VAT plus shipping costs

(15) Versions

PMKNS

161030 NC machine reamer HSS-E similar to DIN212B

Brand: ATORN®
Article no.: 1610300198
Catalogue page: KS-0332

Product description

161030 NC machine reamer HSS-E similar to DIN212B1/100 NC machine reamers

With straight shank and 9° left-hand twist, ground chip space
Form B up to Ø 2.03 mm with end-to-end shank and centring point on both sides
Form D from Ø 2.98-12.03 mm with offset shank
Manufacturing tolerances: Nominal dimensions = 0/+ 0.003 mm

Specify nominal dimension D in mm as a four digit figure:

e.g. 0.72 mm = 0072, 5.14 mm = 0514, 11.00 mm = 1100

1/100 NC machine reamers

With straight shank and 9° left-hand twist, ground chip space
Form B up to Ø 2.03 mm with end-to-end shank and centring point on both sides
Form D from Ø 2.98-12.03 mm with offset shank
Manufacturing tolerances: Nominal dimensions = 0/+ 0.003 mm

Specify nominal dimension D in mm as a four digit figure:

e.g. 0.72 mm = 0072, 5.14 mm = 0514, 11.00 mm = 1100

from 21,90 €

Prices excl. VAT plus shipping costs

(55) Versions

PKNS

161020 NC machine reamer HSS-E similar to DIN212D H7 TiN

Brand: ATORN®
Article no.: 1610200050

Product description

161020 NC machine reamer HSS-E similar to DIN212D H7 TiNNC machine reamers

For H7 fit
Right-hand cutting
Cutting material: HSS-E
Straight shank without square end
Form D: spiral-fluted with offset shank
To ensure maximum true running accuracy for use in hydraulic expansion chucks and high-precision chucks, these reamers are delivered with even shank diameters suitable
for reaming through-holes and blind holes
Also available in TiN-coated version

Single
NC machine reamers

For H7 fit
Right-hand cutting
Cutting material: HSS-E
Straight shank without square end
Form D: spiral-fluted with offset shank
To ensure maximum true running accuracy for use in hydraulic expansion chucks and high-precision chucks, these reamers are delivered with even shank diameters suitable
for reaming through-holes and blind holes
Also available in TiN-coated version

Single

from 38,40 €

Prices excl. VAT plus shipping costs

(4) Versions

PMKNS

160101 Hand reamer HSS DIN206B, H7

Brand: ATORN®
Article no.: 1601010045
Catalogue page: KS-0327
Cutting values: SW-0409

Product description

160101 Hand reamer HSS DIN206B, H7Hand reamers

Type B for H7 fit
Right-hand cutting, manufacturing tolerances in accordance with DIN 1420
Spiral-fluted, long chamfer along 1/4 of the cutting edge length
Even ridge count with irregular pitch for chatter-free bore reaming
Straight shank and square end
Cutting material: HSS
For reaming through-holes

Hand reamers

Type B for H7 fit
Right-hand cutting, manufacturing tolerances in accordance with DIN 1420
Spiral-fluted, long chamfer along 1/4 of the cutting edge length
Even ridge count with irregular pitch for chatter-free bore reaming
Straight shank and square end
Cutting material: HSS
For reaming through-holes

from 14,20 €

Prices excl. VAT plus shipping costs

(35) Versions

PKN

160115 Replacement blade HSS for adjustable hand reamer

Brand: ATORN®
Article no.: 1601150090

Product description

160115 Replacement blade HSS for adjustable hand reamerSets available on request

Quick-adjustment hand reamers

Right-hand cutting
Straight shank and square end
Large adjusting range, fine adjustment with ring gauges or micrometre
Cutting material: HSS
For repair work that does not require narrow fit tolerances, and for intermediate dimensions

Sets available on request

Quick-adjustment hand reamers

Right-hand cutting
Straight shank and square end
Large adjusting range, fine adjustment with ring gauges or micrometre
Cutting material: HSS
For repair work that does not require narrow fit tolerances, and for intermediate dimensions

from 71,10 €

Prices excl. VAT plus shipping costs

(14) Versions

PKN

160120 Hand reamer set HSS model 0-10, adjustable, 11 pieces

Brand: ATORN®
Article no.: 1601200001

Product description

160120 Hand reamer set HSS model 0-10, adjustable, 11 piecesSets available on request

Quick-adjustment hand reamers

Right-hand cutting
Straight shank and square end
Large adjusting range, fine adjustment with ring gauges or micrometre
Cutting material: HSS
For repair work that does not require narrow fit tolerances, and for intermediate dimensions

Sets
Sets available on request

Quick-adjustment hand reamers

Right-hand cutting
Straight shank and square end
Large adjusting range, fine adjustment with ring gauges or micrometre
Cutting material: HSS
For repair work that does not require narrow fit tolerances, and for intermediate dimensions

Sets

from 1.830,00 €

Prices excl. VAT plus shipping costs

(2) Versions

PKN

160130 Rivet hole reamer HSS DIN311, steel/cast iron/NE, 25° left-hand twist, MK

Brand: SARA®
Article no.: 1601300064

Product description

160130 Rivet hole reamer HSS DIN311, steel/cast iron/NE, 25° left-hand twist, MKTaper bridge reamers

Right-hand cutting
Cutting edge lengths 1/3 tapered, 2/3 straight
Shank design: MT
Spiral-fluted, 25° left-hand twist
Cutting material: HSS
Used for reaming bores that are too small or offset

Taper bridge reamers

Right-hand cutting
Cutting edge lengths 1/3 tapered, 2/3 straight
Shank design: MT
Spiral-fluted, 25° left-hand twist
Cutting material: HSS
Used for reaming bores that are too small or offset

from 74,50 €

Prices excl. VAT plus shipping costs

(37) Versions

PMKNS

160140 Hand taper reamer HSS DIN9A, steel/NE, straight fluted

Brand: ATORN®
Article no.: 1601400025
Catalogue page: KS-0328
Cutting values: SW-0410

Product description

160140 Hand taper reamer HSS DIN9A, steel/NE, straight flutedHand taper reamers

1:50 taper for taper pins
Type A, straight-fluted
Type B, spiral-fluted, 6° left-hand twist
Shank design: straight with square end
For taper pins in accordance with DIN EN 22339, DIN 258, DIN EN 28737 and DIN EN 28736
For output bores, we recommend conical pin-hole drill bit no. 101025....
Ø 13 mm and Ø 14 mm, non-DIN
* These dimensions are not included in the standard

Hand taper reamers

1:50 taper for taper pins
Type A Straight-fluted (type B available on request)
Shank design: straight with square end
For taper pins according to DIN EN 22339, DIN 258, DIN EN 28737 and DIN EN 28736
For output bores, we recommend conical pin-hole drill no. 101025....
Ø 13 mm and Ø 14 mm, non-DIN
* These dimensions are not included in the standard

from 17,64 €

Prices excl. VAT plus shipping costs

(25) Versions

PMKNS

160145 Hand taper reamer HSS DIN9B 7-8° left-hand twist

Brand: ATORN®
Article no.: 1601450030

Product description

160145 Hand taper reamer HSS DIN9B 7-8° left-hand twistHand taper reamers

1:50 taper for taper pins
Type A, straight-fluted
Type B, spiral-fluted, 6° left-hand twist
Shank design: straight with square end
For taper pins in accordance with DIN EN 22339, DIN 258, DIN EN 28737 and DIN EN 28736
For output bores, we recommend conical pin-hole drill bit no. 101025....
Ø 13 mm and Ø 14 mm, non-DIN
* These dimensions are not included in the standard

Hand taper reamers

1:50 taper for taper pins
Type A Straight-fluted (type B available on request)
Shank design: straight with square end
For taper pins according to DIN EN 22339, DIN 258, DIN EN 28737 and DIN EN 28736
For output bores, we recommend conical pin-hole drill no. 101025....
Ø 13 mm and Ø 14 mm, non-DIN
* These dimensions are not included in the standard

from 37,20 €

Prices excl. VAT plus shipping costs

(25) Versions

PMKNS

160150 Tapered peeling reamer HSS-E DIN2179 1:50 45° left-hand twist

Brand: ATORN®
Article no.: 1601500020

Product description

160150 Tapered peeling reamer HSS-E DIN2179 1:50 45° left-hand twistHigh helix taper reamers

Taper 1:50 for taper pins
Shank design: straight with driving pin lugs in accordance with DIN 1809
For taper pins in accordance with DIN EN 22339, DIN 258, DIN EN 28737 and DIN EN 28736
Spiral-fluted, 45° left-hand twist
For through-holes
For output bores, we recommend the conical drill bit for pin holes No. 101025....
Requires extensive chip removal (do not pre-drill too deep)
Cutting material: HSS-E
Ø 6.5, 13, 14, 16 and Ø 20 mm, non-DIN

High helix taper reamers

Taper 1:50 for taper pins
Shank design: straight with driving pin lugs in accordance with DIN 1809
For taper pins in accordance with DIN EN 22339, DIN 258, DIN EN 28737 and DIN EN 28736
Spiral-fluted, 45° left-hand twist
For through-holes
For output bores, we recommend the conical drill bit for pin holes No. 101025....
Requires extensive chip removal (do not pre-drill too deep)
Cutting material: HSS-E
Ø 6.5, 13, 14, 16 and Ø 20 mm, non-DIN

from 44,60 €

Prices excl. VAT plus shipping costs

(14) Versions

PKN

161001 Machine reamer HSS-E DIN212 H7

Brand: ATORN®
Article no.: 1610010067
Catalogue page: KS-0329
Cutting values: SW-0409

Product description

161001 Machine reamer HSS-E DIN212 H7Machine reamers

Type B with offset shank up to Ø 2.8 mm
Type D with offset shank up to Ø 2.9 mm
For H7 fit
Right-hand cutting, straight shank
Manufacturing tolerances in accordance with DIN 1420
Ground chip-space version
Cutting material: HSS-E
For reaming through-holes

Standard version

Available on request: Ø 0.90 mm to Ø 12.05 mm in 0.01 mm increments

Machine reamers

Type B with offset shank up to Ø 2.8 mm
Type D with offset shank up to Ø 2.9 mm
For H7 fit
Right-hand cutting, straight shank
Manufacturing tolerances in accordance with DIN 1420
Ground chip-space version
Cutting material: HSS-E
For reaming through-holes

Standard version

Available on request: Ø 0.90 mm to Ø 12.05 mm in 0.01 mm increments

from 20,24 €

Prices excl. VAT plus shipping costs

(96) Versions

PKNS

161002 NC machine reamer set 7 pieces, HSS-E DIN212D H7, steel/cast iron, TiN

Brand: ATORN®
Article no.: 1610021007

Product description

161002 NC machine reamer set 7 pieces, HSS-E DIN212D H7, steel/cast iron, TiNNC machine reamers

For H7 fit
Right-hand cutting
Cutting material: HSS-E
Straight shank without square end
Form D: spiral-fluted with offset shank
To ensure maximum true running accuracy for use in hydraulic expansion chucks and high-precision chucks, these reamers are delivered with even shank diameters suitable
for reaming through-holes and blind holes
Also available in TiN-coated version

Sets
NC machine reamers

For H7 fit
Right-hand cutting
Cutting material: HSS-E
Straight shank without square end
Form D: spiral-fluted with offset shank
To ensure maximum true running accuracy for use in hydraulic expansion chucks and high-precision chucks, these reamers are delivered with even shank diameters suitable
for reaming through-holes and blind holes
Also available in TiN-coated version

Sets

from 378,00 €

Prices excl. VAT plus shipping costs

(1) Versions

PMKNS

161005 Machine reamer HSS-E DIN208B H7 MK

Brand: ATORN®
Article no.: 1610050110
Catalogue page: KS-0333
Cutting values: SW-0409

Product description

161005 Machine reamer HSS-E DIN208B H7 MKMachine reamer with MT shank

Type B for H7 fit
Right-hand cutting
Morse taper
Spiral-fluted, short 45° chamfer
Even ridge count with irregular pitch for chatter-free bore reaming
Cutting material: HSS-E
For reaming through-holes, chip removal in the cutting direction, suitable for blind bores due to short chamfer

Standard version, DIN 208

9° left-hand twist

Machine reamer with MT shank

Type B for H7 fit
Right-hand cutting
Morse taper
Spiral-fluted, short 45° chamfer
Even ridge count with irregular pitch for chatter-free bore reaming
Cutting material: HSS-E
For reaming through-holes, chip removal in the cutting direction, suitable for blind bores due to short chamfer

Standard version, DIN 208

9° left-hand twist

from 27,60 €

Prices excl. VAT plus shipping costs

(37) Versions

PMKNS

161007 Machine reamer HSS-E WN form B 1 H7 MK overlong

Brand: ATORN®
Article no.: 1610070120
Catalogue page: KS-0333
Cutting values: SW-0409

Product description

161007 Machine reamer HSS-E WN form B 1 H7 MK overlongMachine reamer with MT shank

Type B for H7 fit
Right-hand cutting
Morse taper
Spiral-fluted, short 45° chamfer
Even ridge count with irregular pitch for chatter-free bore reaming
Cutting material: HSS-E
For reaming through-holes, chip removal in the cutting direction, suitable for blind bores due to short chamfer

Extra-long, company standard type D

10° left-hand twist

Machine reamer with MT shank

Type B for H7 fit
Right-hand cutting
Morse taper
Spiral-fluted, short 45° chamfer
Even ridge count with irregular pitch for chatter-free bore reaming
Cutting material: HSS-E
For reaming through-holes, chip removal in the cutting direction, suitable for blind bores due to short chamfer

Extra-long, company standard type D

10° left-hand twist

from 291,00 €

Prices excl. VAT plus shipping costs

(10) Versions

161015 Machine peeling reamer HSS-E DIN212E H7

Brand: ATORN®
Article no.: 1610150020

Product description

161015 Machine peeling reamer HSS-E DIN212E H7High helix machine reamers

For H7 fit
Right-hand cutting
45° left-hand twist, type E
Straight shank
With tapered chamfer along approx. 1/6 of the cutting edge length
For through-holes
Clean, chatter-free surface
Broad chip spaces for high cutting speeds and up to 100 % higher feed rates
Cutting material: HSS-E

High helix machine reamers

For H7 fit
Right-hand cutting
45° left-hand twist, type E
Straight shank
With tapered chamfer along approx. 1/6 of the cutting edge length
For through-holes
Clean, chatter-free surface
Broad chip spaces for high cutting speeds and up to 100 % higher feed rates
Cutting material: HSS-E

from 25,30 €

Prices excl. VAT plus shipping costs

(23) Versions

PMK

163010 Machine reamer HNC ecoSpeed, through-hole

Brand: BECK
Article no.: 1630101200

Product description

163010 Machine reamer HNC ecoSpeed, through-holeWith internal cooling

High-performance reamers HNC ecoSpeed

Diameter 6-40 mm
Manufacturing tolerances H7
Cutting material: HSS, TiAlN-coated
NC shank for use directly in hydraulic expansion chucks and high-precision collet chucks
Tight h6 tool shank tolerance for a high level of true running accuracy
With internal coolant supply:
Straight-fluted version, coolant discharged on the face side, for blind holes
Straight-fluted version, coolant discharged on the cutting edges, for blind holes

With internal cooling

High-performance reamers HNC ecoSpeed

Diameter 6-40 mm
Manufacturing tolerances H7
Cutting material: HSS, TiAlN-coated
NC shank for use directly in hydraulic expansion chucks and high-precision collet chucks
Tight h6 tool shank tolerance for a high level of true running accuracy
With internal coolant supply:
Straight-fluted version, coolant discharged on the face side, for blind holes
Straight-fluted version, coolant discharged on the cutting edges, for blind holes

from 49,40 €

Prices excl. VAT plus shipping costs

(41) Versions

PMK

163012 Machine reamer HNC ecoSpeed, blind hole

Brand: BECK
Article no.: 1630121000

Product description

163012 Machine reamer HNC ecoSpeed, blind holeWith internal cooling

High-performance reamers HNC ecoSpeed

Diameter 6-40 mm
Manufacturing tolerances H7
Cutting material: HSS, TiAlN-coated
NC shank for use directly in hydraulic expansion chucks and high-precision collet chucks
Tight h6 tool shank tolerance for a high level of true running accuracy
With internal coolant supply:
Straight-fluted version, coolant discharged on the face side, for blind holes
Straight-fluted version, coolant discharged on the cutting edges, for blind holes

With internal cooling

High-performance reamers HNC ecoSpeed

Diameter 6-40 mm
Manufacturing tolerances H7
Cutting material: HSS, TiAlN-coated
NC shank for use directly in hydraulic expansion chucks and high-precision collet chucks
Tight h6 tool shank tolerance for a high level of true running accuracy
With internal coolant supply:
Straight-fluted version, coolant discharged on the face side, for blind holes
Straight-fluted version, coolant discharged on the cutting edges, for blind holes

from 43,40 €

Prices excl. VAT plus shipping costs

(41) Versions

HSS reamers

Calibration service

Repair service

Regrinding and coating services

Tool dispensing system: SARA GO

HSS reamers

Alle Filter anzeigen

Calibration service

Repair service

Regrinding and coating services

Tool dispensing system: SARA GO