1/100 NC machine reamers

• With straight shank and 9° left-hand twist, ground chip space
• Form B up to Ø 2.03 mm with end-to-end shank and centring point on both sides
• Form D from Ø 2.98-12.03 mm with offset shank
• Manufacturing tolerances: Nominal dimensions = 0/+ 0.003 mm

Specify nominal dimension D in mm as a four digit figure:

• e.g. 0.72 mm = 0072, 5.14 mm = 0514, 11.00 mm = 1100

1/100 NC machine reamers

• With straight shank and 9° left-hand twist, ground chip space
• Form B up to Ø 2.03 mm with end-to-end shank and centring point on both sides
• Form D from Ø 2.98-12.03 mm with offset shank
• Manufacturing tolerances: Nominal dimensions = 0/+ 0.003 mm

Specify nominal dimension D in mm as a four digit figure:

• e.g. 0.72 mm = 0072, 5.14 mm = 0514, 11.00 mm = 1100