Drilling
Manufacturer catalogs & special catalogs

Countersink sets

Product finder
Filter by:
Alle Filter anzeigen
PMKN
150113 Countersink and deburring countersink set HSS, DIN335C 90° length 150 mm
  • Brand: ATORN®
  • Article no.: 1501130001
  • Catalogue page: KS-0313
  • Cutting values: SW-0406
Product description
150113 Countersink and deburring countersink set HSS, DIN335C 90° length 150 mmTaper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets, extra-long shank, similar to DIN 335C
Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets, extra-long shank, similar to DIN 335C
in stock
from 399,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKNS
150170 Countersink set HSS 90° unequal pitch
  • Brand: BECK
  • Article no.: 1501701000
  • Catalogue page: KS-0315
  • Cutting values: SW-0406
Product description
150170 Countersink set HSS 90° unequal pitchTaper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Sets, 5-pcs.
Taper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Sets, 5-pcs.
in stock
from 216,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKNS
150172 Countersink set HSS 90° EUC-Speed with 3-face shank
  • Brand: BECK
  • Article no.: 1501721000
  • Catalogue page: KS-0315
  • Cutting values: SW-0406
Product description
150172 Countersink set HSS 90° EUC-Speed with 3-face shankTaper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Sets, 5-pcs.
Taper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Sets, 5-pcs.
in stock
from 231,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKN
150201 Countersink set HSS 90°, 6 pieces
  • Brand: SARA®
  • Article no.: 1502010001
  • Catalogue page: KS-0313
  • Cutting values: SW-0406
Product description
150201 Countersink set HSS 90°, 6 piecesTaper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
in stock
from 74,30 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKN
150114 Countersink and deburring countersink Set HSS DIN335C 90° TiAlN
  • Brand: ATORN®
  • Article no.: 1501140001
  • Catalogue page: KS-0313
  • Cutting values: SW-0406
Product description
150114 Countersink and deburring countersink Set HSS DIN335C 90° TiAlNTaper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
in stock
from 229,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKN
150117 Countersink and deburring countersink set HSS-E DIN335C 90°
  • Brand: ATORN®
  • Article no.: 1501170001
  • Catalogue page: KS-0314
  • Cutting values: SW-0406
Product description
150117 Countersink and deburring countersink set HSS-E DIN335C 90°Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • HSS-E cutting material
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • HSS-E cutting material
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
in stock
from 126,50 €
Prices excl. VAT plus shipping costs
(1) Versions
PN
150130 Countersink bit set HSS C6, 90°
  • Brand: SARA®
  • Article no.: 1501300001
  • Catalogue page: KS-0318
  • Cutting values: SW-0406
Product description
150130 Countersink bit set HSS C6, 90°90° countersink bits
  • Deburring, chamfering and countersinking
  • DIN 335 Form C
  • Bit shank drive DIN 3126
  • Form C 6.3 hexagonal connector, 6.35 mm (1/4“)
  • 3 cutting edges

8-pcs. set
90° countersink bits
  • Deburring, chamfering and countersinking
  • DIN 335 Form C
  • Bit shank drive DIN 3126
  • Form C 6.3 hexagonal connector, 6.35 mm (1/4“)
  • 3 cutting edges

8-pcs. set
in stock
from 103,50 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKN
150205 Countersink set HSS 90° TiN, 6 pieces
  • Brand: SARA®
  • Article no.: 1502050001
  • Catalogue page: KS-0313
  • Cutting values: SW-0406
Product description
150205 Countersink set HSS 90° TiN, 6 piecesTaper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
in stock
from 131,50 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKN
150211 Countersink set HSS-E 90°, 6 pieces
  • Brand: SARA®
  • Article no.: 1502110001
  • Catalogue page: KS-0314
  • Cutting values: SW-0406
Product description
150211 Countersink set HSS-E 90°, 6 piecesTaper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • HSS-E cutting material
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • HSS-E cutting material
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
in stock
from 113,50 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKN
150271 Countersink set HSS 90° harmonic pitch TiN, 5 pieces
  • Brand: SARA®
  • Article no.: 1502711000
  • Catalogue page: KS-0311
  • Cutting values: SW-0406
Product description
150271 Countersink set HSS 90° harmonic pitch TiN, 5 piecesPatented shank and irregular pitch

ADVANCED taper and deburring countersinks
  • 3 cutting edges
  • HSS and HSS TiN cutting material
  • New cutting edge geometry prevents uneven wear of the cutting edges
  • High degree of wear resistance and hot hardness for maximum service life
  • High true running accuracy with considerably reduced force application
  • Patented shank to stop rotation of the countersink in the drill chuck with optimum torque transfer (from Ø 8.3 mm)

Sets
Patented shank and irregular pitch

ADVANCED taper and deburring countersinks
  • 3 cutting edges
  • HSS and HSS TiN cutting material
  • New cutting edge geometry prevents uneven wear of the cutting edges
  • High degree of wear resistance and hot hardness for maximum service life
  • High true running accuracy with considerably reduced force application
  • Patented shank to stop rotation of the countersink in the drill chuck with optimum torque transfer (from Ø 8.3 mm)

Sets
in stock
from 194,00 €
Prices excl. VAT plus shipping costs
(2) Versions
PMKN
150511 Flat countersink Set HSS DIN373 threaded core holes
  • Brand: ATORN®
  • Article no.: 1505110002
  • Catalogue page: KS-0319
Product description
150511 Flat countersink Set HSS DIN373 threaded core holesCounterbores
  • 3 cutting edges
  • Spiral-fluted
  • With straight shank
  • Fixed pilot pin
  • For countersinks in accordance with DIN 74 part 2, type H, J, K
  • For screws according to DIN 912, DIN 6912, DIN 6984 and DIN 84
  • Cutting material: HSS-E; HSS-E

Sets
  • Contents: 1 unit each Counterbore for screws M3-M10 = 6-part

Counterbores
  • 3 cutting edges
  • Spiral-fluted
  • With straight shank
  • Fixed pilot pin
  • For countersinks in accordance with DIN 74 part 2, type H, J, K
  • For screws according to DIN 912, DIN 6912, DIN 6984 and DIN 84
  • Cutting material: HSS-E, HSS-E

Sets
  • Contents: 1 unit each Counterbore for screws M3-M10 = 6-part

in stock
from 154,50 €
Prices excl. VAT plus shipping costs
(3) Versions
PMKNS
150512 Flat countersink Set HSS-E DIN373 threaded core holes
  • Brand: ATORN®
  • Article no.: 1505120002
  • Catalogue page: KS-0319
Product description
150512 Flat countersink Set HSS-E DIN373 threaded core holesCounterbores
  • 3 cutting edges
  • Spiral-fluted
  • With straight shank
  • Fixed pilot pin
  • For countersinks in accordance with DIN 74 part 2, type H, J, K
  • For screws according to DIN 912, DIN 6912, DIN 6984 and DIN 84
  • Cutting material: HSS-E; HSS-E

Sets
  • Contents: 1 unit each Counterbore for screws M3-M10 = 6-part

Counterbores
  • 3 cutting edges
  • Spiral-fluted
  • With straight shank
  • Fixed pilot pin
  • For countersinks in accordance with DIN 74 part 2, type H, J, K
  • For screws according to DIN 912, DIN 6912, DIN 6984 and DIN 84
  • Cutting material: HSS-E, HSS-E

Sets
  • Contents: 1 unit each Counterbore for screws M3-M10 = 6-part

subsequent delivery
from 245,00 €
Prices excl. VAT plus shipping costs
(3) Versions
PMKN
150116 Countersink and deburring countersink set HSS, DIN335C 90° length 100 mm
  • Brand: ATORN®
  • Article no.: 1501160001
  • Catalogue page: KS-0313
  • Cutting values: SW-0406
Product description
150116 Countersink and deburring countersink set HSS, DIN335C 90° length 100 mmTaper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets, extra-long shank, similar to DIN 335C
Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets, extra-long shank, similar to DIN 335C
subsequent delivery
from 359,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKNS
150151 Countersink and deburring countersink set HSS-E, WN 90°, 5 pcs TiN
  • Brand: ATORN®
  • Article no.: 1501510001
Product description
150151 Countersink and deburring countersink set HSS-E, WN 90°, 5 pcs TiNTaper and deburring countersinks
  • With cross-hole and straight shank
  • Chip removal due to slanted bore in the shank direction, light spiral point
  • Cutting material: HSS-E; HSS-E, TiN-coated

5 pcs set
Taper and deburring countersinks
  • With cross-hole and straight shank
  • Chip removal due to slanted bore in the shank direction, light spiral point
  • Cutting material: HSS-E; HSS-E, TiN-coated

5 pcs set
subsequent delivery
from 209,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKN
150110 Countersink and deburring countersink set HSS DIN335C 90°
  • Brand: ATORN®
  • Article no.: 1501100003
  • Catalogue page: KS-0313
  • Cutting values: SW-0406
Product description
150110 Countersink and deburring countersink set HSS DIN335C 90°Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
subsequent delivery
from 79,30 €
Prices excl. VAT plus shipping costs
(3) Versions
PMKNS
150150 Countersink and deburring countersink set HSS-E, WN 90°, 5 pieces
  • Brand: ATORN®
  • Article no.: 1501500001
Product description
150150 Countersink and deburring countersink set HSS-E, WN 90°, 5 piecesTaper and deburring countersinks
  • With cross-hole and straight shank
  • Chip removal due to slanted bore in the shank direction, light spiral point
  • Cutting material: HSS-E; HSS-E, TiN-coated

5 pcs set
Taper and deburring countersinks
  • With cross-hole and straight shank
  • Chip removal due to slanted bore in the shank direction, light spiral point
  • Cutting material: HSS-E; HSS-E, TiN-coated

5 pcs set
subsequent delivery
from 137,00 €
Prices excl. VAT plus shipping costs
(1) Versions
PMKN
150112 Countersink and deburring countersink Set HSS DIN335C 90° TiN
  • Brand: ATORN®
  • Article no.: 1501120003
  • Catalogue page: KS-0313
  • Cutting values: SW-0406
Product description
150112 Countersink and deburring countersink Set HSS DIN335C 90° TiNTaper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Sets
subsequent delivery
from 114,00 €
Prices excl. VAT plus shipping costs
(3) Versions
PMKN
150270 Countersink set HSS 90° harmonic pitch, 6 pieces
  • Brand: SARA®
  • Article no.: 1502702023
Product description
150270 Countersink set HSS 90° harmonic pitch, 6 piecesPatented shank and irregular pitch

ADVANCED taper and deburring countersinks
  • 3 cutting edges
  • HSS and HSS TiN cutting material
  • New cutting edge geometry prevents uneven wear of the cutting edges
  • High degree of wear resistance and hot hardness for maximum service life
  • High true running accuracy with considerably reduced force application
  • Patented shank to stop rotation of the countersink in the drill chuck with optimum torque transfer (from Ø 8.3 mm)

Sets
in stock
from 78,60 €
Prices excl. VAT plus shipping costs
(3) Versions
PMKN
151001 Combination counterbore Holder Shank MK
  • Brand: GRANLUND
  • Article no.: 1510010001
  • Catalogue page: KS-0321
Product description
151001 Combination counterbore Holder Shank MKCombination counterbores
  • Just 3 holder sizes required to cover a countersink range of 7 - 66 mm (on request up to 84 mm).
  • Any countersink and pilot pin combination possible within the same holder size.
  • Tight bore and shank tolerances ensure a high degree of true-running accuracy.
  • Countersink and pin are fastened quickly and securely with just one screw. An additional stud safety catch prevents countersinks from twisting.
  • Combine elements to produce countersinks for DIN screws and to machine stepped bores or non-standard countersinks
  • 4 cutting edges

Combination counterbore sets
Combination counterbores
  • Just 3 holder sizes required to cover a countersink range of 7 - 66 mm (on request up to 84 mm).
  • Any countersink and pilot pin combination possible within the same holder size.
  • Tight bore and shank tolerances ensure a high degree of true-running accuracy.
  • Countersink and pin are fastened quickly and securely with just one screw. An additional stud safety catch prevents countersinks from twisting.
  • Combine elements to produce countersinks for DIN screws and to machine stepped bores or non-standard countersinks
  • 4 cutting edges

Combination counterbore sets
subsequent delivery
from 1.019,00 €
Prices excl. VAT plus shipping costs
(3) Versions