Clamping
Manufacturer catalogs & special catalogs

Pull-down clamps

Product finder
Filter by:
Alle Filter anzeigen
466105 Heavy-duty clamping jaw for T-slot 43435
  • Brand: AMF
  • Article no.: 4661050019
  • Catalogue page: KS-1301
Product description
466105 Heavy-duty clamping jaw for T-slot 43435Heavy-duty clamping jaws
  • Reversible clamping jaws
  • High design with precise V-shaped guide
  • Base body: Malleable cast iron
  • Clamping jaws: Case-hardened steel
  • Reversible clamping jaws with smooth side for machined workpieces and grooved side for raw clamping surfaces
  • Robust clamping jaws with large clamping surfaces, ideal for laterally clamping high workpieces
  • We recommend using two clamping screws to secure the heavy-duty clamping jaws to the work table! DIN 787 T-slot screws must be ordered separately for use as fastening screws (two per clamping jaw), depending on the slot width.

Heavy-duty clamping jaws
  • Reversible clamping jaws
  • High design with precise V-shaped guide
  • Base body: Malleable cast iron
  • Clamping jaws: Case-hardened steel
  • Reversible clamping jaws with smooth side for machined workpieces and grooved side for raw clamping surfaces
  • Robust clamping jaws with large clamping surfaces, ideal for laterally clamping high workpieces
  • We recommend using two clamping screws to secure the heavy-duty clamping jaws to the work table! DIN 787 T-slot screws must be ordered separately for use as fastening screws (two per clamping jaw), depending on the slot width.

in stock
from 357,00 €
Prices excl. VAT plus shipping costs
(3) Versions
466102 Flat clamp Mini Bulle T-slot
  • Brand: AMF
  • Article no.: 4661020012
  • Catalogue page: KS-1299
Product description
466102 Flat clamp Mini Bulle T-slotMini-Bulle flat clamp
  • Hardened and tempered to a burnished shade
  • h1 = at maximum T-slot depth in accordance with DIN 650
  • To obtain low clamping heights with minimum slot depths, the clamp can be ground down by x mm
  • Allows particularly flat workpieces to be clamped
  • Clamping jaws have a wedge effect that ensures the workpiece is securely fixed to the work table
  • Horizontal forces are absorbed by a screw corresponding to the slot size; this holds the clamp securely in position without damaging the table
  • Supplied in pairs, boxed, complete with fastening screws (DIN 912, 8.8 / ISO 4762) and a hexagonal screwdriver (ISO 2936)
  • Prices per pair

Mini-Bulle flat clamp
  • Hardened and tempered to a burnished shade
  • h1 = at maximum T-slot depth in accordance with DIN 650
  • To obtain low clamping heights with minimum slot depths, the clamp can be ground down by x mm
  • Allows particularly flat workpieces to be clamped
  • Clamping jaws have a wedge effect that ensures the workpiece is securely fixed to the work table
  • Horizontal forces are absorbed by a screw corresponding to the slot size; this holds the clamp securely in position without damaging the table
  • Supplied in pairs, boxed, complete with fastening screws (DIN 912, 8.8 / ISO 4762) and a hexagonal screwdriver (ISO 2936)
  • Prices per pair

subsequent delivery
from 123,00 €
Prices excl. VAT plus shipping costs
(5) Versions
466103 Deep clamping jaw, Bulle, T-slot
  • Brand: AMF
  • Article no.: 4661030012
  • Catalogue page: KS-1301
Product description
466103 Deep clamping jaw, Bulle, T-slotBulle deep clamping jaws
  • Hardened and tempered to a burnished shade
  • Supplied in pairs, boxed, complete with fastening screws (DIN 912, 10.9 / ISO 4762), T-slot nuts (DIN 508) and a hexagonal screwdriver (ISO 2936)
  • Prices per pair

Bulle deep clamping jaws
  • Hardened and tempered to a burnished shade
  • Supplied in pairs, boxed, complete with fastening screws (DIN 912, 10.9 / ISO 4762), T-slot nuts (DIN 508) and a hexagonal screwdriver (ISO 2936)
  • Prices per pair

subsequent delivery
from 131,50 €
Prices excl. VAT plus shipping costs
(9) Versions
466104 Deep clamping jaw Maxi Bull
  • Brand: AMF
  • Article no.: 4661040013
Product description
466104 Deep clamping jaw Maxi BullMaxi-Bulle deep clamping jaws
  • Base body: Ductile iron
  • Clamping jaws: hardened and tempered to a burnished shade
  • For higher workpieces
  • A development on the tried and tested deep clamping jaw, no. 466103....
  • The wedge faces of these clamps are skilfully arranged to achieve maximum clamping forces with low operating forces
  • DIN 787 T-slot screws must be ordered separately for use as fastening screws (two per clamping jaw), depending on the slot width.
  • If there are specific reasons why the fastening screw cannot protrude over the upper edge of the clamp, we recommend DIN 912 / ISO 4762 hexagonal socket head screws combined with DIN 6340 washers and DIN 508 T-slot nuts.
  • Supplied in pairs, boxed, with ISO 2936 hexagonal screwdriver; no fastening screw
  • Prices per pair

Maxi-Bulle deep clamping jaws
  • Base body: Ductile iron
  • Clamping jaws: hardened and tempered to a burnished shade
  • For higher workpieces
  • A development on the tried and tested deep clamping jaw, no. 466103....
  • The wedge faces of these clamps are skilfully arranged to achieve maximum clamping forces with low operating forces
  • DIN 787 T-slot screws must be ordered separately for use as fastening screws (two per clamping jaw), depending on the slot width.
  • If there are specific reasons why the fastening screw cannot protrude over the upper edge of the clamp, we recommend DIN 912 / ISO 4762 hexagonal socket head screws combined with DIN 6340 washers and DIN 508 T-slot nuts.
  • Supplied in pairs, boxed, with ISO 2936 hexagonal screwdriver; no fastening screw
  • Prices per pair

subsequent delivery
from 303,00 €
Prices excl. VAT plus shipping costs
(2) Versions