Pull-down clamping jaws

Product finder

Filter by:

Product description

475051 Combination low tension clamping jawCombination pull-down claw

The pull-down effect ensures that the workpiece is secured to the support
The front side is used for clamping, the rear side can be used as a stop
Space-saving multi-clamping
Clamping washer with toothed surface for raw parts and smooth surface for machined parts
Preferably for mounting in a slot of width B (+0.05 mm)
The engagement height of the clamping washer can be changed by the depth of the slot
Body and clamping washer are case-hardened
Supplied with fastening screws

Combination pull-down claw

The pull-down effect ensures that the workpiece is secured to the support
The front side is used for clamping, the rear side can be used as a stop
Space-saving multi-clamping
Clamping washer with toothed surface for raw parts and smooth surface for machined parts
Preferably for mounting in a slot of width B (+0.05 mm)
The engagement height of the clamping washer can be changed by the depth of the slot
Body and clamping washer are case-hardened
Supplied with fastening screws

from 81,50 €

Prices excl. VAT plus shipping costs

Product description

475050 Pull-down clamping jaw without T-slot nutPull-down clamping claw

Pull-down effect
For 14 mm, 16 mm and 18 mm T-slots, and for mounting directly on the fixture plate or work table
M12 eccentric clamping screw for clamping force of 18 kN
Body and clamping washer case-hardened
Clamping washer with toothed edge for raw parts and smooth edge for machined parts
The clamping washer adapts to the angular position of the workpiece, i.e. the workpiece does not have to be rectangular

Pull-down clamping claw

Pull-down effect
For 14 mm, 16 mm and 18 mm T-slots, and for mounting directly on the fixture plate or work table
M12 eccentric clamping screw for clamping force of 18 kN
Body and clamping washer case-hardened
Clamping washer with toothed edge for raw parts and smooth edge for machined parts
The clamping washer adapts to the angular position of the workpiece, i.e. the workpiece does not have to be rectangular

from 80,20 €

Prices excl. VAT plus shipping costs