Clamping
Manufacturer catalogs & special catalogs

Milling cutter DIN 6359, Weldon chuck

Product finder
Filter by:
Alle Filter anzeigen
434503 Cutter arbours, DIN6359, DIN ISO 7388-1AD
  • Brand: ATORN®
  • Article no.: 4345034008
  • Catalogue page: KS-1214
Product description
434503 Cutter arbours, DIN6359, DIN ISO 7388-1ADMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-1 / DIN 69871 AD
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-1 / DIN 69871 AD
  • Internal coolant supply

in stock
from 47,20 €
Prices excl. VAT plus shipping costs
(113) Versions
434504 Cutter arbours, DIN6359, DIN ISO 7388-1AD with KK
  • Brand: ATORN®
  • Article no.: 4345044008
  • Catalogue page: KS-1214
Product description
434504 Cutter arbours, DIN6359, DIN ISO 7388-1AD with KKMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-1 / DIN 69871 AD
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-1 / DIN 69871 AD
  • Internal coolant supply

in stock
from 55,90 €
Prices excl. VAT plus shipping costs
(37) Versions
434511 Cutter arbours, DIN6359, DIN 69893 HSK-A with KKB
  • Brand: ATORN®
  • Article no.: 4345116306
  • Catalogue page: KS-1213
Product description
434511 Cutter arbours, DIN6359, DIN 69893 HSK-A with KKBMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN 69893 type A (HSK-A)
  • Internal coolant supply
  • When machining with internal coolant supply, a coolant transfer pipe with art.no. 431011... should be used

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN 69893 type A (HSK-A)
  • Internal coolant supply
  • When machining with internal coolant supply, a coolant transfer pipe with art.no. 431011... should be used

in stock
from 129,00 €
Prices excl. VAT plus shipping costs
(95) Versions
434508 Cutter arbours, DIN6359, DIN ISO 7388-2AD with KK
  • Brand: ATORN®
  • Article no.: 4345084008
  • Catalogue page: KS-1215
Product description
434508 Cutter arbours, DIN6359, DIN ISO 7388-2AD with KKMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-2 / MAS BT JIS B 6339
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-2 / MAS BT JIS B 6339
  • Internal coolant supply

subsequent delivery
from 55,90 €
Prices excl. VAT plus shipping costs
(38) Versions
434529 SARA® Basic-Line Cutter arbours DIN 69893 HSK-A
  • Brand: SARA®
  • Article no.: 4345296306
  • Catalogue page: KS-1216
Product description
434529 SARA® Basic-Line Cutter arbours DIN 69893 HSK-AMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm, burnished
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Art.no. 434549 and 434516 at Ø 6 to Ø 18 with two coolant bores
  • Art.no. 434549 and 434516 at Ø 20 to Ø 40 with two coolant bores

DIN69893-1 HSK-A
  • Pre-balanced to G 2.5 / 22,000 rpm
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm, burnished
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Art.no. 434549 and 434516 at Ø 6 to Ø 18 with two coolant bores
  • Art.no. 434549 and 434516 at Ø 20 to Ø 40 with two coolant bores

DIN69893-1 HSK-A
  • Pre-balanced to G 2.5 / 22,000 rpm
  • Internal coolant supply

in stock
from 80,50 €
Prices excl. VAT plus shipping costs
(8) Versions
434549 DIN69893-1 HSK-A 63, with KK
  • Brand: SARA®
  • Article no.: 4345496306
  • Catalogue page: KS-1216
Product description
434549 DIN69893-1 HSK-A 63, with KKMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm, burnished
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Art.no. 434549 and 434516 at Ø 6 to Ø 18 with two coolant bores
  • Art.no. 434549 and 434516 at Ø 20 to Ø 40 with two coolant bores

DIN69893-1 HSK-A
  • Pre-balanced to G 2.5 / 22,000 rpm
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm, burnished
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Art.no. 434549 and 434516 at Ø 6 to Ø 18 with two coolant bores
  • Art.no. 434549 and 434516 at Ø 20 to Ø 40 with two coolant bores

DIN69893-1 HSK-A
  • Pre-balanced to G 2.5 / 22,000 rpm
  • Internal coolant supply

in stock
from 102,50 €
Prices excl. VAT plus shipping costs
(8) Versions
434501 Cutter arbours, DIN6359, DIN 2080
  • Brand: ATORN®
  • Article no.: 4345015010
  • Catalogue page: KS-1216
Product description
434501 Cutter arbours, DIN6359, DIN 2080Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN 2080
Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN 2080
in stock
from 26,48 €
Prices excl. VAT plus shipping costs
(22) Versions
434505 Cutter arbours, DIN6359, DIN ISO 7388-1AD with KKB
  • Brand: ATORN®
  • Article no.: 4345054018
  • Catalogue page: KS-1214
Product description
434505 Cutter arbours, DIN6359, DIN ISO 7388-1AD with KKBMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-1 / DIN 69871 AD
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-1 / DIN 69871 AD
  • Internal coolant supply

in stock
from 25,80 €
Prices excl. VAT plus shipping costs
(94) Versions
434506 SARA® Basic-Line Cutter arbours DIN ISO 7388-1 AD
  • Brand: SARA®
  • Article no.: 4345065008
  • Catalogue page: KS-1216
Product description
434506 SARA® Basic-Line Cutter arbours DIN ISO 7388-1 ADMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm, burnished
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Art.no. 434549 and 434516 at Ø 6 to Ø 18 with two coolant bores
  • Art.no. 434549 and 434516 at Ø 20 to Ø 40 with two coolant bores

DIN ISO 7388-1 AD / DIN 69871 AD
  • Pre-balanced to G 2.5 / 20,000 rpm
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm, burnished
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Art.no. 434549 and 434516 at Ø 6 to Ø 18 with two coolant bores
  • Art.no. 434549 and 434516 at Ø 20 to Ø 40 with two coolant bores

DIN ISO 7388-1 AD / DIN 69871 AD
  • Pre-balanced to G 2.5 / 20,000 rpm
  • Internal coolant supply

in stock
from 17,52 €
Prices excl. VAT plus shipping costs
(17) Versions
434507 Cutter arbours, DIN6359, DIN ISO 7388-2AD
  • Brand: ATORN®
  • Article no.: 4345074214
Product description
434507 Cutter arbours, DIN6359, DIN ISO 7388-2ADMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-2 / MAS BT JIS B 6339
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-2 / MAS BT JIS B 6339
  • Internal coolant supply

in stock
from 29,12 €
Prices excl. VAT plus shipping costs
(100) Versions
434509 Cutter arbours, DIN6359, DIN 69893 HSK-A
  • Brand: ATORN®
  • Article no.: 4345095006
Product description
434509 Cutter arbours, DIN6359, DIN 69893 HSK-AMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN 69893 type A (HSK-A)
  • Internal coolant supply
  • When machining with internal coolant supply, a coolant transfer pipe with art.no. 431011... should be used

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN 69893 type A (HSK-A)
  • Internal coolant supply
  • When machining with internal coolant supply, a coolant transfer pipe with art.no. 431011... should be used

in stock
from 44,40 €
Prices excl. VAT plus shipping costs
(103) Versions
434510 Cutter arbours, DIN6359, DIN 69893 HSK-A with KK
  • Brand: ATORN®
  • Article no.: 4345105012
Product description
434510 Cutter arbours, DIN6359, DIN 69893 HSK-A with KKMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN 69893 type A (HSK-A)
  • Internal coolant supply
  • When machining with internal coolant supply, a coolant transfer pipe with art.no. 431011... should be used

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN 69893 type A (HSK-A)
  • Internal coolant supply
  • When machining with internal coolant supply, a coolant transfer pipe with art.no. 431011... should be used

in stock
from 49,80 €
Prices excl. VAT plus shipping costs
(30) Versions
434516 DIN ISO 7388-1 AD / DIN 69871 AD, with KK
  • Brand: SARA®
  • Article no.: 4345165040
  • Catalogue page: KS-1216
Product description
434516 DIN ISO 7388-1 AD / DIN 69871 AD, with KKMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm, burnished
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Art.no. 434549 and 434516 at Ø 6 to Ø 18 with two coolant bores
  • Art.no. 434549 and 434516 at Ø 20 to Ø 40 with two coolant bores

DIN ISO 7388-1 AD / DIN 69871 AD
  • Pre-balanced to G 2.5 / 20,000 rpm
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm, burnished
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Art.no. 434549 and 434516 at Ø 6 to Ø 18 with two coolant bores
  • Art.no. 434549 and 434516 at Ø 20 to Ø 40 with two coolant bores

DIN ISO 7388-1 AD / DIN 69871 AD
  • Pre-balanced to G 2.5 / 20,000 rpm
  • Internal coolant supply

in stock
from 28,32 €
Prices excl. VAT plus shipping costs
(17) Versions
434518 Cutter arbours, DIN6359, DIN ISO 7388-2AD with KKB
  • Brand: ATORN®
  • Article no.: 4345184008
  • Catalogue page: KS-1215
Product description
434518 Cutter arbours, DIN6359, DIN ISO 7388-2AD with KKBMilling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-2 / MAS BT JIS B 6339
  • Internal coolant supply

Milling cutter holding fixture, DIN 6359
  • For straight shanks, DIN 1835-B (WELDON)
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Alloyed case-hardened steel with a core tensile strength of min. 950 N/mm2
  • Case-hardened to HRC 60 ± 2 (HV 700 ± 50), case depth 0.8 mm ± 0.2 mm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187 and DIN 2080
  • Max. true running accuracy < 0.005 mm
  • Supplied with clamping screw
  • Additional shank designs and AD/B version available on request
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant bores, Ø 20 to Ø 40 mm = four coolant bores
  • Version with coolant bores: Ø 6 to Ø 18 mm = two coolant boresØ 20 to Ø 40 mm = four coolant bores

DIN ISO 7388-2 / MAS BT JIS B 6339
  • Internal coolant supply

External stock
from 67,30 €
Prices excl. VAT plus shipping costs
(31) Versions
434603 DIN ISO7388-1 Cutter arbours DIN6359, Weldon, with planar support
  • Brand: ATORN®
  • Article no.: 4346034008
  • Catalogue page: KS-1200
Product description
434603 DIN ISO7388-1 Cutter arbours DIN6359, Weldon, with planar supportMilling cutter mount DIN6359 (Weldon) with planar support
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187
  • Max. true running accuracy < 0.005 mm
  • Internal coolant supply
  • Case hardened to HRC 60 ± 2

DIN ISO 7388-1 AD (DIN 69871 AD)
  • Internal coolant supply

Milling cutter mount DIN6359 (Weldon) with planar support
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187
  • Max. true running accuracy < 0.005 mm
  • Internal coolant supply
  • Case hardened to HRC 60 ± 2

DIN ISO 7388-1 AD (DIN 69871 AD)
  • Internal coolant supply

in stock
from 159,00 €
Prices excl. VAT plus shipping costs
(16) Versions
434607 DIN ISO7388-2 Cutter arbours DIN6359, Weldon, with planar support
  • Brand: ATORN®
  • Article no.: 4346074016
  • Catalogue page: KS-1200
Product description
434607 DIN ISO7388-2 Cutter arbours DIN6359, Weldon, with planar supportMilling cutter mount DIN6359 (Weldon) with planar support
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187
  • Max. true running accuracy < 0.005 mm
  • Internal coolant supply
  • Case hardened to HRC 60 ± 2

DIN ISO 7388-2 (JIS B 6339)
  • Internal coolant supply

Milling cutter mount DIN6359 (Weldon) with planar support
  • Pre-balanced to G 2.5 / 25,000 rpm
  • Taper angle tolerance quality < AT3 in accordance with DIN 7187
  • Max. true running accuracy < 0.005 mm
  • Internal coolant supply
  • Case hardened to HRC 60 ± 2

DIN ISO 7388-2 (JIS B 6339)
  • Internal coolant supply

in stock
from 63,60 €
Prices excl. VAT plus shipping costs
(23) Versions