Clamping
Manufacturer catalogs & special catalogs

Manual chucks

Product finder
Filter by:
Alle Filter anzeigen
405101 Three-jaw lathe chuck Zentra DIN 6350 cast-iron version
  • Article no.: 4051010100
  • Catalogue page: KS-1126
Product description
405101 Three-jaw lathe chuck Zentra DIN 6350 cast-iron versionUniversal lathe chuck
  • Chuck body made from cast iron or steel
  • Suitable for lathes as well as all types of milling and drilling devices
  • Straight or with direct mounting
  • Guides and wear surfaces ground
  • Flat spiral ring made from high-quality alloy steel, die-forged and hardened
  • Supplied with:
    Includes chuck key and attachment screws
    1 set of boring jaws (stepped outward)
    1 set of turning jaws (stepped inward)

Three-jaw chuck, cast design
  • DIN 6350 with straight centre mount

in stock
from 295,00 €
Prices excl. VAT plus shipping costs
(6) Versions
405012 Wedge bar chuck DURO-T / DIN 6350 with reversible jaws
  • Brand: RÖHM
  • Article no.: 4050120160
  • Catalogue page: KS-1130
Product description
405012 Wedge bar chuck DURO-T / DIN 6350 with reversible jawsWedge bar chuck DURO-T
  • With jaw safety mechanism, centric clamping
  • Higher clamping forces
  • Stiffer chuck body (guaranteed accuracy at higher loads)
  • Chuck body fully surface-hardened
  • High jaw change repeatability
  • Optimised wearing parts (e.g. safety shut-off valve)
  • True running and axial run-out tolerance twice as accurate as specified by DIN accuracy class 1
  • Enhanced corrosion protection
  • Compatible with base and top jaws from other manufacturers
  • Supplied with safety key (as demanded by EN 1550), set of reversible one-piece jaws or set of base jaws with reversible top jaws

With straight centre mount, DIN 6350 A
Directly from the manufacturer
from 2.539,00 €
Prices excl. VAT plus shipping costs
(4) Versions
405013 Wedge bar chuck DURO-T / DIN 6350 with base and top jaws
  • Brand: RÖHM
  • Article no.: 4050130160
  • Catalogue page: KS-1130
Product description
405013 Wedge bar chuck DURO-T / DIN 6350 with base and top jawsWedge bar chuck DURO-T
  • With jaw safety mechanism, centric clamping
  • Higher clamping forces
  • Stiffer chuck body (guaranteed accuracy at higher loads)
  • Chuck body fully surface-hardened
  • High jaw change repeatability
  • Optimised wearing parts (e.g. safety shut-off valve)
  • True running and axial run-out tolerance twice as accurate as specified by DIN accuracy class 1
  • Enhanced corrosion protection
  • Compatible with base and top jaws from other manufacturers
  • Supplied with safety key (as demanded by EN 1550), set of reversible one-piece jaws or set of base jaws with reversible top jaws

With straight centre mount, DIN 6350 A
subsequent delivery
from 2.689,00 €
Prices excl. VAT plus shipping costs
(4) Versions
405014 Wedge bar chuck DURO-T / DIN 55027 with reversible jaws
  • Brand: RÖHM
  • Article no.: 4050141160
  • Catalogue page: KS-1130
Product description
405014 Wedge bar chuck DURO-T / DIN 55027 with reversible jawsWedge bar chuck DURO-T
  • With jaw safety mechanism, centric clamping
  • Higher clamping forces
  • Stiffer chuck body (guaranteed accuracy at higher loads)
  • Chuck body fully surface-hardened
  • High jaw change repeatability
  • Optimised wearing parts (e.g. safety shut-off valve)
  • True running and axial run-out tolerance twice as accurate as specified by DIN accuracy class 1
  • Enhanced corrosion protection
  • Compatible with base and top jaws from other manufacturers
  • Supplied with safety key (as demanded by EN 1550), set of reversible one-piece jaws or set of base jaws with reversible top jaws

With short taper holding fixture, DIN 55027
subsequent delivery
from 2.649,00 €
Prices excl. VAT plus shipping costs
(6) Versions
405015 Wedge bar chuck DURO-T / DIN 55027 with base and top jaws
  • Brand: RÖHM
  • Article no.: 4050151160
  • Catalogue page: KS-1130
Product description
405015 Wedge bar chuck DURO-T / DIN 55027 with base and top jawsWedge bar chuck DURO-T
  • With jaw safety mechanism, centric clamping
  • Higher clamping forces
  • Stiffer chuck body (guaranteed accuracy at higher loads)
  • Chuck body fully surface-hardened
  • High jaw change repeatability
  • Optimised wearing parts (e.g. safety shut-off valve)
  • True running and axial run-out tolerance twice as accurate as specified by DIN accuracy class 1
  • Enhanced corrosion protection
  • Compatible with base and top jaws from other manufacturers
  • Supplied with safety key (as demanded by EN 1550), set of reversible one-piece jaws or set of base jaws with reversible top jaws

With short taper holding fixture, DIN 55027
subsequent delivery
from 3.069,00 €
Prices excl. VAT plus shipping costs
(6) Versions
405102 Four-jaw chuck Zentra DIN 6350 cast-iron version
  • Article no.: 4051020100
  • Catalogue page: KS-1126
Product description
405102 Four-jaw chuck Zentra DIN 6350 cast-iron versionUniversal lathe chuck
  • Chuck body made from cast iron or steel
  • Suitable for lathes as well as all types of milling and drilling devices
  • Straight or with direct mounting
  • Guides and wear surfaces ground
  • Flat spiral ring made from high-quality alloy steel, die-forged and hardened
  • Supplied with:
    Includes chuck key and attachment screws
    1 set of boring jaws (stepped outward)
    1 set of turning jaws (stepped inward)

Three-jaw chuck, cast design
  • DIN 6350 with straight centre mount

in stock
from 319,00 €
Prices excl. VAT plus shipping costs
(6) Versions
405111 Three-jaw lathe chuck Zentra DIN 6350 steel design
  • Article no.: 4051110100
  • Catalogue page: KS-1126
Product description
405111 Three-jaw lathe chuck Zentra DIN 6350 steel designUniversal lathe chuck
  • Chuck body made from cast iron or steel
  • Suitable for lathes as well as all types of milling and drilling devices
  • Straight or with direct mounting
  • Guides and wear surfaces ground
  • Flat spiral ring made from high-quality alloy steel, die-forged and hardened
  • Supplied with:
    Includes chuck key and attachment screws
    1 set of boring jaws (stepped outward)
    1 set of turning jaws (stepped inward)

Three-jaw chuck, steel design
  • DIN 6350 with straight centre mount

subsequent delivery
from 325,00 €
Prices excl. VAT plus shipping costs
(6) Versions
405112 Four-jaw chuck Zentra DIN 6350 steel design
  • Article no.: 4051120100
  • Catalogue page: KS-1126
Product description
405112 Four-jaw chuck Zentra DIN 6350 steel designUniversal lathe chuck
  • Chuck body made from cast iron or steel
  • Suitable for lathes as well as all types of milling and drilling devices
  • Straight or with direct mounting
  • Guides and wear surfaces ground
  • Flat spiral ring made from high-quality alloy steel, die-forged and hardened
  • Supplied with:
    Includes chuck key and attachment screws
    1 set of boring jaws (stepped outward)
    1 set of turning jaws (stepped inward)

Three-jaw chuck, steel design
  • DIN 6350 with straight centre mount

subsequent delivery
from 395,00 €
Prices excl. VAT plus shipping costs
(6) Versions
405113 Three-jaw lathe chuck Zentra DIN 55027 steel design
  • Article no.: 4051133125
  • Catalogue page: KS-1126
Product description
405113 Three-jaw lathe chuck Zentra DIN 55027 steel designUniversal lathe chuck
  • Chuck body made from cast iron or steel
  • Suitable for lathes as well as all types of milling and drilling devices
  • Straight or with direct mounting
  • Guides and wear surfaces ground
  • Flat spiral ring made from high-quality alloy steel, die-forged and hardened
  • Supplied with:
    Includes chuck key and attachment screws
    1 set of boring jaws (stepped outward)
    1 set of turning jaws (stepped inward)

Three-jaw chuck, steel design
  • DIN 55027 with short taper holder
  • Includes stay bolt and collar nut

in stock
from 247,60 €
Prices excl. VAT plus shipping costs
(10) Versions
405114 Four-jaw chuck Zentra DIN 55027 steel design
  • Article no.: 4051143125
  • Catalogue page: KS-1126
Product description
405114 Four-jaw chuck Zentra DIN 55027 steel designUniversal lathe chuck
  • Chuck body made from cast iron or steel
  • Suitable for lathes as well as all types of milling and drilling devices
  • Straight or with direct mounting
  • Guides and wear surfaces ground
  • Flat spiral ring made from high-quality alloy steel, die-forged and hardened
  • Supplied with:
    Includes chuck key and attachment screws
    1 set of boring jaws (stepped outward)
    1 set of turning jaws (stepped inward)

Three-jaw chuck, steel design
  • DIN 55027 with short taper holder
  • Includes stay bolt and collar nut

subsequent delivery
from 620,00 €
Prices excl. VAT plus shipping costs
(10) Versions
405115 Three-jaw lathe chuck Zentra DIN 55029 steel design
  • Article no.: 4051153125
  • Catalogue page: KS-1126
Product description
405115 Three-jaw lathe chuck Zentra DIN 55029 steel designUniversal lathe chuck
  • Chuck body made from cast iron or steel
  • Suitable for lathes as well as all types of milling and drilling devices
  • Straight or with direct mounting
  • Guides and wear surfaces ground
  • Flat spiral ring made from high-quality alloy steel, die-forged and hardened
  • Supplied with:
    Includes chuck key and attachment screws
    1 set of boring jaws (stepped outward)
    1 set of turning jaws (stepped inward)

Three-jaw chuck, steel design
  • DIN 55029 (Camlock) with short taper holder
  • Includes Camlock bolt

subsequent delivery
from 509,00 €
Prices excl. VAT plus shipping costs
(10) Versions
405116 Four-jaw chuck Zentra DIN 55029 steel design
  • Article no.: 4051166200
  • Catalogue page: KS-1126
Product description
405116 Four-jaw chuck Zentra DIN 55029 steel designUniversal lathe chuck
  • Chuck body made from cast iron or steel
  • Suitable for lathes as well as all types of milling and drilling devices
  • Straight or with direct mounting
  • Guides and wear surfaces ground
  • Flat spiral ring made from high-quality alloy steel, die-forged and hardened
  • Supplied with:
    Includes chuck key and attachment screws
    1 set of boring jaws (stepped outward)
    1 set of turning jaws (stepped inward)

Three-jaw chuck, steel design
  • DIN 55029 (Camlock) with short taper holder
  • Includes Camlock bolt

in stock
from 487,60 €
Prices excl. VAT plus shipping costs
(10) Versions
407202 Three-jaw chuck DURO-M with straight holding fixture as per DIN 6350
  • Brand: RÖHM
  • Article no.: 4072020080
  • Catalogue page: KS-1128
Product description
407202 Three-jaw chuck DURO-M with straight holding fixture as per DIN 6350DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with straight holding fixture in accordance with DIN 6350
Directly from the manufacturer
from 203,60 €
Prices excl. VAT plus shipping costs
(11) Versions
407206 Three-jaw lathe chuck DURO-M with stay bolts for camlock as per DIN 55029
  • Brand: RÖHM
  • Article no.: 4072063125
Product description
407206 Three-jaw lathe chuck DURO-M with stay bolts for camlock as per DIN 55029DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with stay bolts for Camlock according to DIN 55029
Directly from the manufacturer
from 759,00 €
Prices excl. VAT plus shipping costs
(18) Versions
407212 Three-jaw chuck DURO-M U with straight holding fixture as per DIN 6350
  • Brand: RÖHM
  • Article no.: 4072120100
Product description
407212 Three-jaw chuck DURO-M U with straight holding fixture as per DIN 6350DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with straight holding fixture in accordance with DIN 6350
Directly from the manufacturer
from 669,00 €
Prices excl. VAT plus shipping costs
(8) Versions
407216 Three-jaw chuck DURO-M U with stay bolts for camlock as per DIN 55029
  • Brand: RÖHM
  • Article no.: 4072163125
Product description
407216 Three-jaw chuck DURO-M U with stay bolts for camlock as per DIN 55029DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with stay bolts for Camlock according to DIN 55029
Directly from the manufacturer
from 899,00 €
Prices excl. VAT plus shipping costs
(18) Versions
407226 Three-jaw chuck DURO-M with stay bolts and collar nuts as per DIN 55027
  • Brand: RÖHM
  • Article no.: 4072263100
Product description
407226 Three-jaw chuck DURO-M with stay bolts and collar nuts as per DIN 55027DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with stay bolts and collar nut according to DIN 55027
Directly from the manufacturer
from 729,00 €
Prices excl. VAT plus shipping costs
(19) Versions
407236 Three-jaw lathe chuck DURO-M U with stay bolt and collar nut DIN 55027
  • Brand: RÖHM
  • Article no.: 4072363100
Product description
407236 Three-jaw lathe chuck DURO-M U with stay bolt and collar nut DIN 55027DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with stay bolts and collar nut according to DIN 55027
Directly from the manufacturer
from 829,00 €
Prices excl. VAT plus shipping costs
(19) Versions
407500 Manual collet chuck Captis-M
  • Brand: RÖHM
  • Article no.: 4075000042
Product description
407500 Manual collet chuck Captis-MManual collet chuck Captis-M
  • Suitable for rotary and stationary machining
  • Precise concentricity and repetition precision
  • Uniform force distribution due to surrounding clamping
  • Robust clamping thanks to axial infeed
  • Compact design for optimal workpiece accessibility
  • For clamping heads with manual changing fixture
  • Also suitable for quick-change system ABSIS-C mandrel

Mechanical design
subsequent delivery
from 2.309,00 €
Prices excl. VAT plus shipping costs
(2) Versions
409202 Four-jaw chuck DURO-M with straight holding fixture as per DIN 6350
  • Brand: RÖHM
  • Article no.: 4092020080
  • Catalogue page: KS-1128
Product description
409202 Four-jaw chuck DURO-M with straight holding fixture as per DIN 6350DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with straight holding fixture in accordance with DIN 6350
Directly from the manufacturer
from 629,00 €
Prices excl. VAT plus shipping costs
(10) Versions
409205 Four-jaw chuck DURO-M with stay bolts and collar nuts as per DIN 55027
  • Brand: RÖHM
  • Article no.: 4092054125
  • Catalogue page: KS-1128
Product description
409205 Four-jaw chuck DURO-M with stay bolts and collar nuts as per DIN 55027DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with stay bolts and collar nut according to DIN 55027
Directly from the manufacturer
from 919,00 €
Prices excl. VAT plus shipping costs
(16) Versions
409206 Four-jaw chuck DURO-M with stay bolts for camlock as per DIN 55029
  • Brand: RÖHM
  • Article no.: 4092064125
  • Catalogue page: KS-1128
Product description
409206 Four-jaw chuck DURO-M with stay bolts for camlock as per DIN 55029DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with stay bolts for Camlock according to DIN 55029
Directly from the manufacturer
from 889,00 €
Prices excl. VAT plus shipping costs
(16) Versions
409212 Four-jaw chuck DURO-M U with straight holding fixture as per DIN 6350
  • Brand: RÖHM
  • Article no.: 4092120100
Product description
409212 Four-jaw chuck DURO-M U with straight holding fixture as per DIN 6350DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with straight holding fixture in accordance with DIN 6350
Directly from the manufacturer
from 739,00 €
Prices excl. VAT plus shipping costs
(9) Versions
409215 Four-jaw chuck DURO-M U with stay bolt and collar nut DIN 55027
  • Brand: RÖHM
  • Article no.: 4092154125
Product description
409215 Four-jaw chuck DURO-M U with stay bolt and collar nut DIN 55027DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with stay bolts and collar nut according to DIN 55027
Directly from the manufacturer
from 999,00 €
Prices excl. VAT plus shipping costs
(16) Versions
409216 Four-jaw chuck DURO-M U with stay bolts for camlock as per DIN 55029
  • Brand: RÖHM
  • Article no.: 4092164125
Product description
409216 Four-jaw chuck DURO-M U with stay bolts for camlock as per DIN 55029DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with stay bolts for Camlock according to DIN 55029
Directly from the manufacturer
from 1.009,00 €
Prices excl. VAT plus shipping costs
(16) Versions
409222 Six-jaw lathe chuck DURO-M with straight holding fixture as per DIN 6350
  • Brand: RÖHM
  • Article no.: 4092220160
Product description
409222 Six-jaw lathe chuck DURO-M with straight holding fixture as per DIN 6350DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with straight holding fixture in accordance with DIN 6350
Directly from the manufacturer
from 2.339,00 €
Prices excl. VAT plus shipping costs
(5) Versions
409223 Three-jaw chuck DURO-M BVD with straight holding fixture as per DIN 6350
  • Brand: RÖHM
  • Article no.: 4092230125
Product description
409223 Three-jaw chuck DURO-M BVD with straight holding fixture as per DIN 6350DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with straight holding fixture in accordance with DIN 6350
Directly from the manufacturer
from 699,00 €
Prices excl. VAT plus shipping costs
(8) Versions
409224 Four-jaw chuck DURO-M BVD with straight holding fixture as per DIN 6350
  • Brand: RÖHM
  • Article no.: 4092240125
Product description
409224 Four-jaw chuck DURO-M BVD with straight holding fixture as per DIN 6350DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck with straight holding fixture in accordance with DIN 6350
Directly from the manufacturer
from 839,00 €
Prices excl. VAT plus shipping costs
(8) Versions
409225 Three-jaw chuck DURO-M drilled through w. short taper as per DIN 55026
  • Brand: RÖHM
  • Article no.: 4092255160
Product description
409225 Three-jaw chuck DURO-M drilled through w. short taper as per DIN 55026DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck drilled through with short taper as per DIN 55026
Directly from the manufacturer
from 1.339,00 €
Prices excl. VAT plus shipping costs
(14) Versions
409226 Three-jaw chuck DURO-M with short taper as per DIN 55026
  • Brand: RÖHM
  • Article no.: 4092265160
Product description
409226 Three-jaw chuck DURO-M with short taper as per DIN 55026DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck drilled through with short taper as per DIN 55026
Directly from the manufacturer
from 1.459,00 €
Prices excl. VAT plus shipping costs
(13) Versions
409227 Four-jaw chuck DURO-M drilled through with short taper as per DIN 55026
  • Brand: RÖHM
  • Article no.: 4092275160
Product description
409227 Four-jaw chuck DURO-M drilled through with short taper as per DIN 55026DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck drilled through with short taper as per DIN 55026
Directly from the manufacturer
from 1.529,00 €
Prices excl. VAT plus shipping costs
(12) Versions
409228 Four-jaw chuck DURO-M with short taper as per DIN 55026
  • Brand: RÖHM
  • Article no.: 4092285160
Product description
409228 Four-jaw chuck DURO-M with short taper as per DIN 55026DURO-M universal lathe chuck
  • Clamping of rotationally symmetrical parts for turning and milling operations
  • Chuck body and all other components made of steel
  • Extra low construction for minimal interference with contour
  • Jaws in the chuck ground for concentricity
  • Balanced and hardened
  • Supplied with insert spanner, drilling and turning jaws
  • Other versions available on request

Lathe chuck drilled through with short taper as per DIN 55026
Directly from the manufacturer
from 1.779,00 €
Prices excl. VAT plus shipping costs
(12) Versions