- Brand: ATORN®
- Article no.: 3913302035
Product description
391330 PKD turning insert DCGW 70202 ADC/F sharp-edgedPKD and CBN ISO indexable cutting inserts- Ultra-hard cutting materials, single tip
- CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
Material: Grey cast iron (GG25), superalloys.
Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard - CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard - CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
Material: Hard turning, dry, HRC 52 - 65
Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard - PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers - Cutting edge length "m" depends on the cutting radius
DCGW, sharp-edged (A)
from 62,00 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3926000106
- Catalogue page: KS-0899
- Cutting values: SW-1089
Product description
392600 PKD indexable cutting insert CCGTPKD ISO indexable cutting inserts- Polycrystalline diamond (composite cutting material) with carbide base, good cutting edge sharpness and low cutting pressure with narrow tolerances. Lower wear resistance with increased toughness.
CCGT Z1
from 48,60 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3926020106
- Catalogue page: KS-0899
- Cutting values: SW-1089
Product description
392602 PKD indexable cutting insert DCGTPKD ISO indexable cutting inserts- Polycrystalline diamond (composite cutting material) with carbide base, good cutting edge sharpness and low cutting pressure with narrow tolerances. Lower wear resistance with increased toughness.
DCGT Z1
from 48,60 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3926070106
- Catalogue page: KS-0899
- Cutting values: SW-1089
Product description
392607 PKD indexable cutting insert VCGTPKD ISO indexable cutting inserts- Polycrystalline diamond (composite cutting material) with carbide base, good cutting edge sharpness and low cutting pressure with narrow tolerances. Lower wear resistance with increased toughness.
VCGT Z1
from 52,20 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 3968306235
Product description
396830 PCD turning insert VNGA 160404 ADC/A sharp-edgedPKD and CBN ISO indexable cutting inserts- Ultra-hard cutting materials, single tip
- CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
Material: Grey cast iron (GG25), superalloys.
Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard - CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard - CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
Material: Hard turning, dry, HRC 52 - 65
Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard - PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers - Cutting edge length "m" depends on the cutting radius
VNGA, sharp-edged (A)
from 74,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 3914305835
Product description
391430 PKD turning insert DNGA 150604 ADC/F sharp-edgedPKD and CBN ISO indexable cutting inserts- Ultra-hard cutting materials, single tip
- CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
Material: Grey cast iron (GG25), superalloys.
Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard - CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard - CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
Material: Hard turning, dry, HRC 52 - 65
Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard - PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers - Cutting edge length "m" depends on the cutting radius
DNGA, sharp-edged (A)
from 62,00 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3926030106
- Catalogue page: KS-0899
- Cutting values: SW-1089
Product description
392603 PKD indexable cutting insert DCGWPKD ISO indexable cutting inserts- Polycrystalline diamond (composite cutting material) with carbide base, good cutting edge sharpness and low cutting pressure with narrow tolerances. Lower wear resistance with increased toughness.
DCGW Z1
from 48,60 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3926010106
- Catalogue page: KS-0899
- Cutting values: SW-1089
Product description
392601 PKD indexable cutting insert CCGWPKD ISO indexable cutting inserts- Polycrystalline diamond (composite cutting material) with carbide base, good cutting edge sharpness and low cutting pressure with narrow tolerances. Lower wear resistance with increased toughness.
CCGW Z1
from 48,60 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 3902303435
Product description
390230 PKD turning insert CCGW 60202 ADC/F sharp-edgedPKD and CBN ISO indexable cutting inserts- Ultra-hard cutting materials, single tip
- CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
Material: Grey cast iron (GG25), superalloys.
Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard - CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard - CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
Material: Hard turning, dry, HRC 52 - 65
Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard - PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers - Cutting edge length "m" depends on the cutting radius
CCGW, sharp-edged (A)
from 46,50 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 3904305045
Product description
390430 PKD turning insert CNGA 120404 ADC10/F sharp-edgedPKD and CBN ISO indexable cutting inserts- Ultra-hard cutting materials, single tip
- CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
Material: Grey cast iron (GG25), superalloys.
Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard - CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard - CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
Material: Hard turning, dry, HRC 52 - 65
Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard - PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers - Cutting edge length "m" depends on the cutting radius
CNGA, sharp-edged (A)
from 62,00 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3926040106
Product description
392604 PKD indexable cutting insert SCGTPKD ISO indexable cutting inserts- Polycrystalline diamond (composite cutting material) with carbide base, good cutting edge sharpness and low cutting pressure with narrow tolerances. Lower wear resistance with increased toughness.
SCGT Z1
from 53,30 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3926050106
Product description
392605 PKD indexable cutting insert TCGTPKD ISO indexable cutting inserts- Polycrystalline diamond (composite cutting material) with carbide base, good cutting edge sharpness and low cutting pressure with narrow tolerances. Lower wear resistance with increased toughness.
TCGT Z1
from 48,50 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3926060106
- Catalogue page: KS-0899
- Cutting values: SW-1089
Product description
392606 PKD indexable cutting insert TCGWPKD ISO indexable cutting inserts- Polycrystalline diamond (composite cutting material) with carbide base, good cutting edge sharpness and low cutting pressure with narrow tolerances. Lower wear resistance with increased toughness.
TCGW Z1
from 48,60 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3000006403
Product description
392608 PKD indexable cutting insert VCGWTurning
Supplier and manufacturer catalogues
from 52,10 €
Prices excl. VAT plus shipping costs
- Brand: PALBIT
- Article no.: 3926090106
Product description
392609 PKD indexable cutting insert TPGWPKD ISO indexable cutting inserts- Polycrystalline diamond (composite cutting material) with carbide base, good cutting edge sharpness and low cutting pressure with narrow tolerances. Lower wear resistance with increased toughness.
TPGW Z1
from 53,30 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 3955306235
Product description
395530 PKD turning insert TNGA 160404 ADC/F sharp-edgedPKD and CBN ISO indexable cutting inserts- Ultra-hard cutting materials, single tip
- CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
Material: Grey cast iron (GG25), superalloys.
Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard - CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard - CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
Material: Hard turning, dry, HRC 52 - 65
Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard - PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers - Cutting edge length "m" depends on the cutting radius
TNGA, sharp-edged (A)
from 75,00 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?