Turning
Manufacturer catalogs & special catalogs

ISO indexable cutting inserts CBN negative

Product finder
Filter by:
Alle Filter anzeigen
391405 CBN turning insert DNGA 150604 ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3914055833
Product description
391405 CBN turning insert DNGA 150604 ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DNGA, chamfered
Directly from the manufacturer
from 47,80 €
Prices excl. VAT plus shipping costs
(2) Versions
391525 CBN indexable cutting insert DNGA H40 F2
  • Brand: ATORN®
  • Article no.: 3915250105
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391525 CBN indexable cutting insert DNGA H40 F2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
390405 CBN indexable cutting insert CNGA ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3904055033
Product description
390405 CBN indexable cutting insert CNGA ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

CNGA, chamfered
Directly from the manufacturer
from 47,00 €
Prices excl. VAT plus shipping costs
(2) Versions
391401 CBN turning insert DNGA 150604 ABC 25/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3914015833
Product description
391401 CBN turning insert DNGA 150604 ABC 25/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DNGA, sharp-edged (A)
Directly from the manufacturer
from 47,80 €
Prices excl. VAT plus shipping costs
(2) Versions
391503 CBN indexable cutting insert DNGA H25 B2
  • Brand: ATORN®
  • Article no.: 3915030101
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391503 CBN indexable cutting insert DNGA H25 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391505 CBN indexable cutting insert DNGA H25 G2
  • Brand: ATORN®
  • Article no.: 3915050103
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391505 CBN indexable cutting insert DNGA H25 G2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391533 CBN indexable cutting insert CNGA X20 D2
  • Brand: ATORN®
  • Article no.: 3915330110
  • Catalogue page: KS-0893
  • Cutting values: SW-1089
Product description
391533 CBN indexable cutting insert CNGA X20 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

CNGA negative ABC X15-X20
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
396815 CBN turning insert VNGA 160404-T ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3968156233
Product description
396815 CBN turning insert VNGA 160404-T ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

VNGA, chamfered
Directly from the manufacturer
from 63,00 €
Prices excl. VAT plus shipping costs
(2) Versions
391509 CBN indexable cutting insert TNGA H25 D3
  • Brand: ATORN®
  • Article no.: 3915090102
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391509 CBN indexable cutting insert TNGA H25 D3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
Directly from the manufacturer
from 94,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391516 CBN indexable cutting insert CNGA X15 B2
  • Brand: ATORN®
  • Article no.: 3915160109
  • Catalogue page: KS-0893
  • Cutting values: SW-1089
Product description
391516 CBN indexable cutting insert CNGA X15 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

CNGA negative ABC X15-X20
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391534 CBN indexable cutting insert DNGA X20 D2
  • Brand: ATORN®
  • Article no.: 3915340110
  • Catalogue page: KS-0893
  • Cutting values: SW-1089
Product description
391534 CBN indexable cutting insert DNGA X20 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

DNGA negative ABC X15-X20
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
390247 CBN turning insert DNGA 150604 ABC15/T chamfered
  • Brand: ATORN®
  • Article no.: 3902475832
Product description
390247 CBN turning insert DNGA 150604 ABC15/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DNGA, chamfered
subsequent delivery
from 45,00 €
Prices excl. VAT plus shipping costs
(1) Versions
391405 CBN turning insert DNGA 150604 ABC10/T chamfered
  • Brand: ATORN®
  • Article no.: 3914055832
Product description
391405 CBN turning insert DNGA 150604 ABC10/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DNGA, chamfered
Directly from the manufacturer
from 47,80 €
Prices excl. VAT plus shipping costs
(1) Versions
391500 CBN indexable cutting insert CNGA H25 B2
  • Brand: ATORN®
  • Article no.: 3915000101
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391500 CBN indexable cutting insert CNGA H25 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391501 CBN indexable cutting insert CNGA H25 D2
  • Brand: ATORN®
  • Article no.: 3915010102
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391501 CBN indexable cutting insert CNGA H25 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391502 CBN indexable cutting insert CNGA H25 G2
  • Brand: ATORN®
  • Article no.: 3915020103
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391502 CBN indexable cutting insert CNGA H25 G2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391504 CBN indexable cutting insert DNGA H25 D2
  • Brand: ATORN®
  • Article no.: 3915040102
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391504 CBN indexable cutting insert DNGA H25 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391508 CBN indexable cutting insert TNGA H25 B3
  • Brand: ATORN®
  • Article no.: 3915080101
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391508 CBN indexable cutting insert TNGA H25 B3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
Directly from the manufacturer
from 94,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391510 CBN indexable cutting insert TNGA H25 G3
  • Brand: ATORN®
  • Article no.: 3915100103
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391510 CBN indexable cutting insert TNGA H25 G3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
Directly from the manufacturer
from 94,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391517 CBN indexable cutting insert DNGA X15 B2
  • Brand: ATORN®
  • Article no.: 3915170109
  • Catalogue page: KS-0893
  • Cutting values: SW-1089
Product description
391517 CBN indexable cutting insert DNGA X15 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

DNGA negative ABC X15-X20
Directly from the manufacturer
from 25,80 €
Prices excl. VAT plus shipping costs
(2) Versions
391519 CBN indexable cutting insert TNGA X15 B3
  • Brand: ATORN®
  • Article no.: 3915190109
  • Catalogue page: KS-0893
  • Cutting values: SW-1089
Product description
391519 CBN indexable cutting insert TNGA X15 B3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

TNGA negative ABC X15-X20
Directly from the manufacturer
from 94,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391522 CBN indexable cutting insert CNGA H40 C2
  • Brand: ATORN®
  • Article no.: 3915220104
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391522 CBN indexable cutting insert CNGA H40 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391523 CBN indexable cutting insert CNGA H40 F2
  • Brand: ATORN®
  • Article no.: 3915230105
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391523 CBN indexable cutting insert CNGA H40 F2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
Directly from the manufacturer
from 25,80 €
Prices excl. VAT plus shipping costs
(2) Versions
391524 CBN indexable cutting insert DNGA H40 C2
  • Brand: ATORN®
  • Article no.: 3915240104
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391524 CBN indexable cutting insert DNGA H40 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391528 CBN indexable cutting insert TNGA H40 C3
  • Brand: ATORN®
  • Article no.: 3915280104
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391528 CBN indexable cutting insert TNGA H40 C3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
Directly from the manufacturer
from 94,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391529 CBN indexable cutting insert TNGA H40 F3
  • Brand: ATORN®
  • Article no.: 3915290205
  • Catalogue page: KS-0892
  • Cutting values: SW-1089
Product description
391529 CBN indexable cutting insert TNGA H40 F3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
Directly from the manufacturer
from 37,80 €
Prices excl. VAT plus shipping costs
(2) Versions
391536 CBN indexable cutting insert TNGA X20 D3
  • Brand: ATORN®
  • Article no.: 3915360110
  • Catalogue page: KS-0893
  • Cutting values: SW-1089
Product description
391536 CBN indexable cutting insert TNGA X20 D3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

TNGA negative ABC X15-X20
Directly from the manufacturer
from 94,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391538 CBN indexable cutting insert CNGA K10 B2
  • Brand: ATORN®
  • Article no.: 3915380106
  • Catalogue page: KS-0894
  • Cutting values: SW-1089
Product description
391538 CBN indexable cutting insert CNGA K10 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

CNGA negative AB K10-K15
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391539 CBN indexable cutting insert DNGA K10 B2
  • Brand: ATORN®
  • Article no.: 3915390106
  • Catalogue page: KS-0894
  • Cutting values: SW-1089
Product description
391539 CBN indexable cutting insert DNGA K10 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

DNGA negative AB K10-K15
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391542 CBN indexable cutting insert CNGA K15 D2
  • Brand: ATORN®
  • Article no.: 3915420107
  • Catalogue page: KS-0894
  • Cutting values: SW-1089
Product description
391542 CBN indexable cutting insert CNGA K15 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

CNGA negative AB K10-K15
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391543 CBN indexable cutting insert DNGA K15 D2
  • Brand: ATORN®
  • Article no.: 3915430107
  • Catalogue page: KS-0894
  • Cutting values: SW-1089
Product description
391543 CBN indexable cutting insert DNGA K15 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

DNGA negative AB K10-K15
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391546 CBN indexable cutting insert CNGA S10 C2
  • Brand: ATORN®
  • Article no.: 3915460108
  • Catalogue page: KS-0895
  • Cutting values: SW-1089
Product description
391546 CBN indexable cutting insert CNGA S10 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material type AB S10
  • For machining heat-resistant special alloys, titanium, chrome and nickel alloys

CNGA negative AB S10
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391547 CBN indexable cutting insert DNGA S10 C2
  • Brand: ATORN®
  • Article no.: 3915470108
  • Catalogue page: KS-0895
  • Cutting values: SW-1089
Product description
391547 CBN indexable cutting insert DNGA S10 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material type AB S10
  • For machining heat-resistant special alloys, titanium, chrome and nickel alloys

DNGA negative AB S10
Directly from the manufacturer
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
392000 CBN indexable cutting insert CNGA Z2
  • Brand: PALBIT
  • Article no.: 3920000188
  • Catalogue page: KS-0897
  • Cutting values: SW-1089
Product description
392000 CBN indexable cutting insert CNGA Z2CBN ISO indexable cutting inserts
  • ultra-hard cutting material

CNGA Z2
in stock
from 53,60 €
Prices excl. VAT plus shipping costs
(6) Versions
392001 CBN indexable cutting insert CNGA Z4
  • Brand: PALBIT
  • Article no.: 3920010388
Product description
392001 CBN indexable cutting insert CNGA Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

CNGA Z4
External stock
from 68,70 €
Prices excl. VAT plus shipping costs
(3) Versions
392002 CBN indexable cutting insert CNGA WG Z4
  • Brand: PALBIT
  • Article no.: 3920020188
Product description
392002 CBN indexable cutting insert CNGA WG Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

CNGA S1513 WG Z4
External stock
from 75,20 €
Prices excl. VAT plus shipping costs
(2) Versions
392003 CBN indexable cutting insert CNGA WG Z4
  • Brand: PALBIT
  • Article no.: 3920030188
Product description
392003 CBN indexable cutting insert CNGA WG Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

CNGA S2513 WG Z4
External stock
from 75,20 €
Prices excl. VAT plus shipping costs
(2) Versions
392004 CBN indexable cutting insert DNGA Z2
  • Brand: PALBIT
  • Article no.: 3920040588
Product description
392004 CBN indexable cutting insert DNGA Z2CBN ISO indexable cutting inserts
  • ultra-hard cutting material

DNGA Z2
External stock
from 52,40 €
Prices excl. VAT plus shipping costs
(8) Versions
392005 CBN indexable cutting insert DNGA Z4
  • Brand: PALBIT
  • Article no.: 3920050188
Product description
392005 CBN indexable cutting insert DNGA Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

DNGA Z4
External stock
from 66,40 €
Prices excl. VAT plus shipping costs
(3) Versions
392006 CBN indexable cutting insert SNGA Z4
  • Brand: PALBIT
  • Article no.: 3920060189
Product description
392006 CBN indexable cutting insert SNGA Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

SNGA Z4
subsequent delivery
from 82,60 €
Prices excl. VAT plus shipping costs
(1) Versions
392007 CBN indexable cutting insert TNGA Z3
  • Brand: PALBIT
  • Article no.: 3920070188
Product description
392007 CBN indexable cutting insert TNGA Z3CBN ISO indexable cutting inserts
  • ultra-hard cutting material

TNGA Z3
External stock
from 83,60 €
Prices excl. VAT plus shipping costs
(6) Versions
392008 CBN indexable cutting insert TNGA Z6
  • Brand: PALBIT
  • Article no.: 3920080188
Product description
392008 CBN indexable cutting insert TNGA Z6CBN ISO indexable cutting inserts
  • ultra-hard cutting material

TNGA Z6
External stock
from 109,50 €
Prices excl. VAT plus shipping costs
(3) Versions
392009 CBN indexable cutting insert VNGA Z2
  • Brand: PALBIT
  • Article no.: 3920090388
Product description
392009 CBN indexable cutting insert VNGA Z2CBN ISO indexable cutting inserts
  • ultra-hard cutting material

VNGA Z2
External stock
from 53,30 €
Prices excl. VAT plus shipping costs
(6) Versions
392010 CBN indexable cutting insert WNGA Z3
  • Brand: PALBIT
  • Article no.: 3920100388
Product description
392010 CBN indexable cutting insert WNGA Z3CBN ISO indexable cutting inserts
  • ultra-hard cutting material

WNGA Z3
External stock
from 60,50 €
Prices excl. VAT plus shipping costs
(6) Versions
395501 CBN turning insert TNGA 160404 ABC10/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3955016232
Product description
395501 CBN turning insert TNGA 160404 ABC10/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

TNGA, sharp-edged (A)
Directly from the manufacturer
from 47,40 €
Prices excl. VAT plus shipping costs
(1) Versions
395501 CBN turning insert TNGA 160404 ABC25/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3955016233
Product description
395501 CBN turning insert TNGA 160404 ABC25/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

TNGA, sharp-edged (A)
Directly from the manufacturer
from 47,80 €
Prices excl. VAT plus shipping costs
(2) Versions
395505 CBN turning insert TNMA 160404-T-ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3955056233
Product description
395505 CBN turning insert TNMA 160404-T-ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

TNGA, chamfered
Directly from the manufacturer
from 47,80 €
Prices excl. VAT plus shipping costs
(2) Versions
396810 CBN turning insert VNGA 160404 ABC10/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3968106232
Product description
396810 CBN turning insert VNGA 160404 ABC10/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

VNGA, sharp-edged (A)
Directly from the manufacturer
from 63,00 €
Prices excl. VAT plus shipping costs
(1) Versions
396815 CBN turning insert VNGA 160404-T ABC10/T chamfered
  • Brand: ATORN®
  • Article no.: 3968156232
Product description
396815 CBN turning insert VNGA 160404-T ABC10/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

VNGA, chamfered
Directly from the manufacturer
from 63,00 €
Prices excl. VAT plus shipping costs
(1) Versions