Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:

• High-quality surface finish
• No change in geometry due to wear and tear compared to grinding points
• Machining of almost all materials up to 68 HRC

Machining tasks:

• Fine machining
• Very fine plaster work
• Corrections to tool and mould making
• Sharpening of cutting tools

Machinable materials:

• Steel and cast steel
• Stainless steel (INOX)
• Non-ferrous metals
• Cast iron

Recommendations for use:

• Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
• To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
  - Shank Ø 3 mm: 75 to 300 watt
  - Shank Ø 6 mm: from 300 watt
• Please observe the recommended speeds.

Suitable tool drives:

• Flexible shaft drives, straight grinders, robot applications, tool machines

WRC shank 3 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:

• High-quality surface finish
• No change in geometry due to wear and tear compared to grinding points
• Machining of almost all materials up to 68 HRC

Machining tasks:

• Fine machining
• Very fine plaster work
• Corrections to tool and mould making
• Sharpening of cutting tools

Machinable materials:

• Steel and cast steel
• Stainless steel (INOX)
• Non-ferrous metals
• Cast iron

Recommendations for use:

• Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
• To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
  - Shank Ø 3 mm: 75 to 300 watt
  - Shank Ø 6 mm: from 300 watt
• Please observe the recommended speeds.

Suitable tool drives:

• Flexible shaft drives, straight grinders, robot applications, tool machines

WRC shank 3 mm