Grinding
Manufacturer catalogs & special catalogs

Carbide miniature rotary cutters

Product finder
Filter by:
Alle Filter anzeigen
605510 Small rotary cutter carbide DIN8033 form KUD, teeth 6, 1, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055100303
  • Catalogue page: KS-0506
Product description
605510 Small rotary cutter carbide DIN8033 form KUD, teeth 6, 1, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

KUD - ball shape
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(2) Versions
605525 Small rotary cutter carbide DIN8033 form KEL, teeth 6, 1, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055250312
  • Catalogue page: KS-0506
Product description
605525 Small rotary cutter carbide DIN8033 form KEL, teeth 6, 1, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

KEL - round taper
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(2) Versions
605530 Small rotary cutter carbide DIN8033 form SKM, teeth 6, 1, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055300311
  • Catalogue page: KS-0507
Product description
605530 Small rotary cutter carbide DIN8033 form SKM, teeth 6, 1, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

SKM - pointed taper
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(4) Versions
605533 Small rotary cutter carbide DIN8033 form SKM, teeth 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055330311
  • Catalogue page: KS-0507
Product description
605533 Small rotary cutter carbide DIN8033 form SKM, teeth 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

SKM - pointed taper
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(4) Versions
605534 Small rotary cutter carbide DIN8033 form KEL, teeth 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055340312
  • Catalogue page: KS-0506
Product description
605534 Small rotary cutter carbide DIN8033 form KEL, teeth 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

KEL - round taper
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(2) Versions
250037 Micro rotary cutter SKM shank 3 mm
  • Brand: PFERD
  • Article no.: 2500370307
Product description
250037 Micro rotary cutter SKM shank 3 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

SKM shank 3 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

SKM shank 3 mm
External stock
from 20,55 €
Prices excl. VAT plus shipping costs
(3) Versions
605501 Small rotary cutter carbide DIN8033 form ZYA, teeth 6, 1
  • Brand: ATORN®
  • Article no.: 6055010314
  • Catalogue page: KS-0506
Product description
605501 Small rotary cutter carbide DIN8033 form ZYA, teeth 6, 1Up to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

ZYA - cylindrical shape without spur cut
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(2) Versions
605513 Small rotary cutter carbide DIN8033 form KUD, teeth 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055130306
  • Catalogue page: KS-0506
Product description
605513 Small rotary cutter carbide DIN8033 form KUD, teeth 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

KUD - ball shape
in stock
from 21,70 €
Prices excl. VAT plus shipping costs
(1) Versions
605525 Small rotary cutter carbide DIN8033 form H, teeth 6, 1, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055250306
  • Catalogue page: KS-0506
Product description
605525 Small rotary cutter carbide DIN8033 form H, teeth 6, 1, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

H - flame shape
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(1) Versions
605583 Small rotary cutter set carb. DIN8033 10 pieces, serration. 6, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055830010
  • Catalogue page: KS-0507
Product description
605583 Small rotary cutter set carb. DIN8033 10 pieces, serration. 6, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

Set
in stock
from 142,50 €
Prices excl. VAT plus shipping costs
(1) Versions
606035 Small rotary cutter carbide form KEL teeth 6, 1
  • Brand: ATORN®
  • Article no.: 6060350127
  • Catalogue page: KS-0507
Product description
606035 Small rotary cutter carbide form KEL teeth 6, 1Carbide miniature burrs, extra-long
  • Shank Ø 3 mm

KEL - round taper
in stock
from 26,10 €
Prices excl. VAT plus shipping costs
(1) Versions
605525 Small rotary cutter carbide DIN8033 form SPG, teeth 6, 1, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055250307
  • Catalogue page: KS-0506
Product description
605525 Small rotary cutter carbide DIN8033 form SPG, teeth 6, 1, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

SPG - pointed arch shape
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(3) Versions
605544 Small rotary cutter carbide DIN8033 form ZYAS, teeth 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055440314
  • Catalogue page: KS-0506
Product description
605544 Small rotary cutter carbide DIN8033 form ZYAS, teeth 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

ZYAS - cylindrical shape with spur cut
External stock
from 13,05 €
Prices excl. VAT plus shipping costs
(2) Versions
606010 Small rotary cutter carbide form KUD teeth 6, 1
  • Brand: ATORN®
  • Article no.: 6060100003
  • Catalogue page: KS-0507
Product description
606010 Small rotary cutter carbide form KUD teeth 6, 1Carbide miniature burrs, extra-long
  • Shank Ø 3 mm

KUD - ball shape
in stock
from 26,10 €
Prices excl. VAT plus shipping costs
(1) Versions
606020 Small rotary cutter carbide form RBF teeth 6, 1
  • Brand: ATORN®
  • Article no.: 6060200127
  • Catalogue page: KS-0507
Product description
606020 Small rotary cutter carbide form RBF teeth 6, 1Carbide miniature burrs, extra-long
  • Shank Ø 3 mm

RBF - rounded arch shape
in stock
from 26,10 €
Prices excl. VAT plus shipping costs
(1) Versions
606030 Small rotary cutter carbide form SKM Teeth 6 1
  • Brand: ATORN®
  • Article no.: 6060300011
  • Catalogue page: KS-0507
Product description
606030 Small rotary cutter carbide form SKM Teeth 6 1Carbide miniature burrs, extra-long
  • Shank Ø 3 mm

SKM - pointed taper
in stock
from 26,10 €
Prices excl. VAT plus shipping costs
(1) Versions
250036 Micro rotary cutter SPG shank 3 mm
  • Brand: PFERD
  • Article no.: 2500360307
Product description
250036 Micro rotary cutter SPG shank 3 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

SPG shank 3 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

SPG shank 3 mm
External stock
from 20,55 €
Prices excl. VAT plus shipping costs
(3) Versions
250063 Micro rotary cutter RBS shank 6 mm
  • Brand: PFERD
  • Article no.: 2500650618
Product description
250063 Micro rotary cutter RBS shank 6 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

RBF shank 6 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

RBF shank 6 mm
External stock
from 32,85 €
Prices excl. VAT plus shipping costs
(4) Versions
606005 Small rotary cutter carbide form WRC, teeth 6, 1
  • Brand: ATORN®
  • Article no.: 6060050014
  • Catalogue page: KS-0507
Product description
606005 Small rotary cutter carbide form WRC, teeth 6, 1Carbide miniature burrs, extra-long
  • Shank Ø 3 mm

WRC - radius end shape
in stock
from 26,10 €
Prices excl. VAT plus shipping costs
(1) Versions
250061 Micro rotary cutter ZYA shank 6 mm
  • Brand: PFERD
  • Article no.: 2500610616
Product description
250061 Micro rotary cutter ZYA shank 6 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

ZYA shank 6 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

ZYA shank 6 mm
External stock
from 29,75 €
Prices excl. VAT plus shipping costs
(4) Versions
250063 Micro rotary cutter WRC shank 6 mm
  • Brand: PFERD
  • Article no.: 2500630616
Product description
250063 Micro rotary cutter WRC shank 6 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

WRC shank 6 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

WRC shank 6 mm
External stock
from 33,05 €
Prices excl. VAT plus shipping costs
(4) Versions
250066 Micro rotary cutter SPG shank 6 mm
  • Brand: PFERD
  • Article no.: 2500660618
Product description
250066 Micro rotary cutter SPG shank 6 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

SPG shank 6 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

SPG shank 6 mm
External stock
from 31,85 €
Prices excl. VAT plus shipping costs
(4) Versions
250067 Micro rotary cutter SKM shank 6 mm
  • Brand: PFERD
  • Article no.: 2500670618
Product description
250067 Micro rotary cutter SKM shank 6 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

SKM shank 6 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

SKM shank 6 mm
External stock
from 31,85 €
Prices excl. VAT plus shipping costs
(4) Versions
605505 Small rotary cutter carbide DIN8033 form WRC, teeth 6, 1, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055050211
  • Catalogue page: KS-0506
Product description
605505 Small rotary cutter carbide DIN8033 form WRC, teeth 6, 1, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

WRC - radius end shape
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(3) Versions
250034 Micro rotary cutter KUD shank 3 mm
  • Brand: PFERD
  • Article no.: 2500340215
Product description
250034 Micro rotary cutter KUD shank 3 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

KUD shank 3 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

KUD shank 3 mm
External stock
from 20,55 €
Prices excl. VAT plus shipping costs
(4) Versions
605502 Small rotary cutter carbide DIN8033 form ZYA, teeth 9, 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055020211
  • Catalogue page: KS-0506
Product description
605502 Small rotary cutter carbide DIN8033 form ZYA, teeth 9, 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

ZYA - cylindrical shape without spur cut
in stock
from 12,50 €
Prices excl. VAT plus shipping costs
(1) Versions
605515 Small rotary cutter carbide DIN8033 form TRE, teeth 6, 1, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055150355
  • Catalogue page: KS-0506
Product description
605515 Small rotary cutter carbide DIN8033 form TRE, teeth 6, 1, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

TRE - drop shape
External stock
from 13,05 €
Prices excl. VAT plus shipping costs
(2) Versions
605541 Small rotary cutter carbide DIN8033 form ZYAS, teeth 6, 1, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055410211
  • Catalogue page: KS-0506
Product description
605541 Small rotary cutter carbide DIN8033 form ZYAS, teeth 6, 1, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

ZYAS - cylindrical shape with spur cut
in stock
from 14,50 €
Prices excl. VAT plus shipping costs
(3) Versions
250031 Micro rotary cutter ZYA shank 3 mm
  • Brand: PFERD
  • Article no.: 2500310210
Product description
250031 Micro rotary cutter ZYA shank 3 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

ZYA shank 3 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

ZYA shank 3 mm
External stock
from 18,50 €
Prices excl. VAT plus shipping costs
(4) Versions
250033 Micro rotary cutter WRC shank 3 mm
  • Brand: PFERD
  • Article no.: 2500330210
Product description
250033 Micro rotary cutter WRC shank 3 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

WRC shank 3 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

WRC shank 3 mm
External stock
from 20,55 €
Prices excl. VAT plus shipping costs
(3) Versions
250035 Micro rotary cutter RBF shank 3 mm
  • Brand: PFERD
  • Article no.: 2500350307
Product description
250035 Micro rotary cutter RBF shank 3 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

RBF shank 3 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

RBF shank 3 mm
External stock
from 20,55 €
Prices excl. VAT plus shipping costs
(3) Versions
250062 Micro rotary cutter ZYAS shank 6 mm
  • Brand: PFERD
  • Article no.: 2500620616
Product description
250062 Micro rotary cutter ZYAS shank 6 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

ZYAS shank 6 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

ZYAS shank 6 mm
External stock
from 32,55 €
Prices excl. VAT plus shipping costs
(4) Versions
250064 Micro rotary cutter KUD shank 6 mm
  • Brand: PFERD
  • Article no.: 2500640605
Product description
250064 Micro rotary cutter KUD shank 6 mmCarbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

KUD shank 6 mm
Carbide rotary cutter for fine machining
Carbide metal rotary cutters with MICRO teeth are specially designed for fine cutting and are used in areas where grinding points are normally used. They offer a higher cutting performance and produce a high-quality surface finish, particularly compared with conventional milled surfaces. At the same time, they are low vibration and produce little noise. They retain their geometry throughout their entire service life. They are ideally suited for machining tasks during manual and machine use.

Advantages:
  • High-quality surface finish
  • No change in geometry due to wear and tear compared to grinding points
  • Machining of almost all materials up to 68 HRC
Machining tasks:
  • Fine machining
  • Very fine plaster work
  • Corrections to tool and mould making
  • Sharpening of cutting tools
Machinable materials:
  • Steel and cast steel
  • Stainless steel (INOX)
  • Non-ferrous metals
  • Cast iron
Recommendations for use:
  • Where possible, use the tools on high-performance drives with flexibly-mounted spindles to avoid vibrations.
  • To ensure the efficient use of rotary cutters, work at high rotational speeds/cutting speeds. Performance recommendation for tool drives:
    - Shank Ø 3 mm: 75 to 300 watt
    - Shank Ø 6 mm: from 300 watt
  • Please observe the recommended speeds.
Suitable tool drives:
  • Flexible shaft drives, straight grinders, robot applications, tool machines

KUD shank 6 mm
External stock
from 27,85 €
Prices excl. VAT plus shipping costs
(4) Versions
605508 Small rotary cutter carbide DIN8033 form WRC, teeth 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055080211
  • Catalogue page: KS-0506
Product description
605508 Small rotary cutter carbide DIN8033 form WRC, teeth 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

WRC - radius end shape
in stock
from 5,22 €
Prices excl. VAT plus shipping costs
(3) Versions
605518 Small rotary cutter carbide DIN8033 form TRE, teeth 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055180355
  • Catalogue page: KS-0506
Product description
605518 Small rotary cutter carbide DIN8033 form TRE, teeth 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

TRE - drop shape
in stock
from 13,05 €
Prices excl. VAT plus shipping costs
(2) Versions
605520 Small rotary cutter carbide DIN8033 form RBF, teeth 6, 1, shank-6 mm
  • Brand: ATORN®
  • Article no.: 6055200612
  • Catalogue page: KS-0506
Product description
605520 Small rotary cutter carbide DIN8033 form RBF, teeth 6, 1, shank-6 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

RBF - rounded arch shape
in stock
from 8,68 €
Prices excl. VAT plus shipping costs
(3) Versions
605523 Small rotary cutter carbide DIN8033 form RBF, teeth 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055230308
  • Catalogue page: KS-0506
Product description
605523 Small rotary cutter carbide DIN8033 form RBF, teeth 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

RBF - rounded arch shape
External stock
from 13,05 €
Prices excl. VAT plus shipping costs
(3) Versions
605524 Small rotary cutter carbide DIN8033 form SPG, teeth 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055240307
  • Catalogue page: KS-0506
Product description
605524 Small rotary cutter carbide DIN8033 form SPG, teeth 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

SPG - pointed arch shape
External stock
from 13,05 €
Prices excl. VAT plus shipping costs
(3) Versions
605528 Small rotary cutter carbide DIN8033 form H, teeth 2, shank-3 mm
  • Brand: ATORN®
  • Article no.: 6055280306
  • Catalogue page: KS-0506
Product description
605528 Small rotary cutter carbide DIN8033 form H, teeth 2, shank-3 mmUp to a head Ø of 6 mm

Carbide miniature burrs
  • Similar to DIN 8033
  • Shank Ø 3 mm

H - flame shape
in stock
from 9,79 €
Prices excl. VAT plus shipping costs
(1) Versions
606001 Small rotary cutter carbide DIN8033 form ZYA, teeth 6, 1 ATORN
  • Brand: ATORN®
  • Article no.: 6060010014
  • Catalogue page: KS-0507
Product description
606001 Small rotary cutter carbide DIN8033 form ZYA, teeth 6, 1 ATORNCarbide miniature burrs, extra-long
  • Shank Ø 3 mm

ZYA - cylindrical shape
in stock
from 10,44 €
Prices excl. VAT plus shipping costs
(1) Versions
606015 Small rotary cutter carbide form TRE teeth 6, 1
  • Brand: ATORN®
  • Article no.: 6060150055
  • Catalogue page: KS-0507
Product description
606015 Small rotary cutter carbide form TRE teeth 6, 1Carbide miniature burrs, extra-long
  • Shank Ø 3 mm

TRE - drop shape
in stock
from 10,44 €
Prices excl. VAT plus shipping costs
(1) Versions
606025 Small rotary cutter carbide form SPG teeth 6, 1
  • Brand: ATORN®
  • Article no.: 6060250127
  • Catalogue page: KS-0507
Product description
606025 Small rotary cutter carbide form SPG teeth 6, 1Carbide miniature burrs, extra-long
  • Shank Ø 3 mm

SPG - pointed arch shape
in stock
from 10,44 €
Prices excl. VAT plus shipping costs
(1) Versions