Workshop supplies
Manufacturer catalogs & special catalogs

Drilling bushes

Product finder
Filter by:
Alle Filter anzeigen
734507 Drill bush with collar
  • Article no.: 7345070400
Product description
734507 Drill bush with collarDrill guide collar bushes, type A
  • Type A, bore rounded at one end
  • Hardened special steel, ground inside and outside to a high level of tolerance compliance
  • Hardness 62 HRC
  • Tolerances: D = F7, D1 = n6
  • Bore D increasing in 0.1 mm increments
  • Intermediate dimensions, versions with D over 26.0 mm, and type B versions with bores rounded at both ends are available on request
  • Please specify nominal dimension D in mm, as a four digit figure! (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

Long
subsequent delivery
from 5,90 €
Prices excl. VAT plus shipping costs
(2) Versions
734042 Hole punch
  • Article no.: 7340420500
Product description
734042 Hole punchPrecision punch, cylindrical head, type A
  • With cylindrical head, type A
  • HSS, hardened, ground and lapped, hot-formed head further tempered
  • Hardness: Shank: 62 - 66 HRC, head 47 - 57 HRC
  • Tolerance m5

subsequent delivery
from 8,40 €
Prices excl. VAT plus shipping costs
(4) Versions
734001 Hole punch
  • Article no.: 7340010220
Product description
734001 Hole punchPrecision punch, type D, HSS
  • Type D
  • Hardened and tempered HSS; hot-formed head further tempered after rounding
  • Shank and head plunge-ground and lapped
  • Hardness: Shank 62 - 66 HRC, head 45 - 55 HRC
  • D increasing in 0.1 mm increments up to Ø 25.00 mm
  • Tolerance h6
  • Please specify nominal dimension D in mm, as a four digit figure! (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

in stock
from 1,41 €
Prices excl. VAT plus shipping costs
(69) Versions
734002 Hole punch
  • Article no.: 7340020300
Product description
734002 Hole punchPrecision punch, type D, HSS
  • Type D
  • Hardened and tempered HSS; hot-formed head further tempered after rounding
  • Shank and head plunge-ground and lapped
  • Hardness: Shank 62 - 66 HRC, head 45 - 55 HRC
  • D increasing in 0.1 mm increments up to Ø 25.00 mm
  • Tolerance h6
  • Please specify nominal dimension D in mm, as a four digit figure! (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

in stock
from 1,57 €
Prices excl. VAT plus shipping costs
(35) Versions
734003 Hole punch
  • Article no.: 7340030220
Product description
734003 Hole punchPrecision punch, type D, HSS
  • Type D
  • Hardened and tempered HSS; hot-formed head further tempered after rounding
  • Shank and head plunge-ground and lapped
  • Hardness: Shank 62 - 66 HRC, head 45 - 55 HRC
  • D increasing in 0.1 mm increments up to Ø 25.00 mm
  • Tolerance h6
  • Please specify nominal dimension D in mm, as a four digit figure! (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

in stock
from 1,92 €
Prices excl. VAT plus shipping costs
(66) Versions
734004 Hole punch
  • Article no.: 7340040580
Product description
734004 Hole punchPrecision punch, type D, HSS
  • Type D
  • Hardened and tempered HSS; hot-formed head further tempered after rounding
  • Shank and head plunge-ground and lapped
  • Hardness: Shank 62 - 66 HRC, head 45 - 55 HRC
  • D increasing in 0.1 mm increments up to Ø 25.00 mm
  • Tolerance h6
  • Please specify nominal dimension D in mm, as a four digit figure! (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

in stock
from 3,70 €
Prices excl. VAT plus shipping costs
(5) Versions
734041 Hole punch
  • Article no.: 7340411600
Product description
734041 Hole punchPrecision punch, cylindrical head, type A
  • With cylindrical head, type A
  • HSS, hardened, ground and lapped, hot-formed head further tempered
  • Hardness: Shank: 62 - 66 HRC, head 47 - 57 HRC
  • Tolerance m5

in stock
from 8,08 €
Prices excl. VAT plus shipping costs
(2) Versions
734043 Hole punch
  • Article no.: 7340430500
Product description
734043 Hole punchPrecision punch, cylindrical head, type A
  • With cylindrical head, type A
  • HSS, hardened, ground and lapped, hot-formed head further tempered
  • Hardness: Shank: 62 - 66 HRC, head 47 - 57 HRC
  • Tolerance m5

in stock
from 4,24 €
Prices excl. VAT plus shipping costs
(3) Versions
734501 Drill bush
  • Article no.: 7345011200
Product description
734501 Drill bushCylindrical drill guide bushes, type A
  • Form A, bore rounded at one end
  • Special steel, hardened, ground inside and outside to a high level of tolerance compliance
  • Hardness 62 HRC
  • Tolerances: D = F7, D1 = n6
  • Bore D increasing in 0.1 mm increments
  • Intermediate dimensions, sizes above 26.0 mm, versions Form D and Form B, bores rounded at both ends are available on request
  • Please specify nominal dimension D in mm, as a four digit figure (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

Short
in stock
from 1,57 €
Prices excl. VAT plus shipping costs
(4) Versions
734502 Drill bush
  • Article no.: 7345021800
Product description
734502 Drill bushCylindrical drill guide bushes, type A
  • Form A, bore rounded at one end
  • Special steel, hardened, ground inside and outside to a high level of tolerance compliance
  • Hardness 62 HRC
  • Tolerances: D = F7, D1 = n6
  • Bore D increasing in 0.1 mm increments
  • Intermediate dimensions, sizes above 26.0 mm, versions Form D and Form B, bores rounded at both ends are available on request
  • Please specify nominal dimension D in mm, as a four digit figure (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

Medium
in stock
from 2,82 €
Prices excl. VAT plus shipping costs
(5) Versions
734503 Drill bush
  • Article no.: 7345030410
Product description
734503 Drill bushCylindrical drill guide bushes, type A
  • Form A, bore rounded at one end
  • Special steel, hardened, ground inside and outside to a high level of tolerance compliance
  • Hardness 62 HRC
  • Tolerances: D = F7, D1 = n6
  • Bore D increasing in 0.1 mm increments
  • Intermediate dimensions, sizes above 26.0 mm, versions Form D and Form B, bores rounded at both ends are available on request
  • Please specify nominal dimension D in mm, as a four digit figure (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

Long
in stock
from 1,66 €
Prices excl. VAT plus shipping costs
(5) Versions
734505 Drill bush with collar
  • Article no.: 7345050210
Product description
734505 Drill bush with collarDrill guide collar bushes, type A
  • Type A, bore rounded at one end
  • Hardened special steel, ground inside and outside to a high level of tolerance compliance
  • Hardness 62 HRC
  • Tolerances: D = F7, D1 = n6
  • Bore D increasing in 0.1 mm increments
  • Intermediate dimensions, versions with D over 26.0 mm, and type B versions with bores rounded at both ends are available on request
  • Please specify nominal dimension D in mm, as a four digit figure! (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

Short
in stock
from 1,36 €
Prices excl. VAT plus shipping costs
(8) Versions
734506 Drill bush with collar
  • Article no.: 7345060260
Product description
734506 Drill bush with collarDrill guide collar bushes, type A
  • Type A, bore rounded at one end
  • Hardened special steel, ground inside and outside to a high level of tolerance compliance
  • Hardness 62 HRC
  • Tolerances: D = F7, D1 = n6
  • Bore D increasing in 0.1 mm increments
  • Intermediate dimensions, versions with D over 26.0 mm, and type B versions with bores rounded at both ends are available on request
  • Please specify nominal dimension D in mm, as a four digit figure! (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

Medium
in stock
from 1,43 €
Prices excl. VAT plus shipping costs
(11) Versions
734515 Cutting bush
  • Article no.: 7345150400
Product description
734515 Cutting bushCutting bushes, type B
  • Type B, bore rounded at both ends
  • Hardened and tempered HSS, ground inside and outside to a high level of tolerance compliance
  • Hardness 58 - 62 HRC
  • Tolerances: D = H8, D2 = k6
  • D increasing in 0.1 mm increments
  • Intermediate dimensions, larger diameters and type A available on request

  • Please specify nominal dimension D in mm, as a four digit figure! (e.g. 3.60 mm = 0360; 15.10 mm = 1510)

Short
subsequent delivery
from 12,35 €
Prices excl. VAT plus shipping costs
(1) Versions