- Brand: MITUTOYO
- Article no.: 5705210031
Product description
570521 Surftest SJ-210 surface roughness testing equipmentSurftest SJ-210 surface roughness tester- Handy mobile test device, designed for use in production environments
- Compact design
- Easy to handle
- Suitable for measuring surface roughness directly on the clamped workpiece during production or stationary inspections
- Large, easy-to-read 6 cm (2.4'') colour LCD display, can be rotated electronically
- Profiles displayed in real time
- Integrated memory for 10 measurement conditions
- Memory can be expanded with a micro SD card up to max. 2 GB: e.g. 500 measurement conditions + 10,000 measurement values or 500 measurement conditions + 500 profiles, analysis software on request
- With RS232C, Digimatic and USB interfaces
- Foot switch connector
- Colour-based tolerance evaluation
- Allocation of access rights
- Choice of 16 languages
- Switchable mains or battery operation
- Feed unit can either be integrated in the device or used separately with a connection cable
- Motorised feed with up to 3 user-selectable measuring speeds
- Probe system skid radius 40 mm, skid pressure force < 400 mN
- Probe tip geometry in accordance with DIN EN ISO 3274, radius 2 µm, point angle 60°
- Double skid system for measuring sheet metal in accordance with DIN EN ISO 10049 available on request, comprehensive optional accessories on the following pages
- Technical data
Profiles: Roughness profile (R), DF profile, R motif
Standards: DIN EN ISO, VDA, ANSI, JIS, user-defined conditions
Measurement range: 360 µm
Evaluation parameters: Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, Rmax, Rz1max, S, HSC, RzJIS, Rppi, R?a, R?q, Rlr, Rmr, Rmr(c), Rdc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR
Cut-off lengths: ?c: 0.08, 0.25, 0.8 and 2.5 mm
Digital filters: Gaussian, 2CR75, PC75
Number of individual measurement sections: 1 to 10
Limit wavelength ?s: Set to specification
Measuring force: 0.75 mN
Power supply: Mains adapter 230 V, 50 Hz and fitted battery - Supplied with roughness standard, mains adapter, protective film for the display, carry bag and operating manual
Surftest SJ-210 surface roughness tester- Handy mobile test device, designed for use in production environments
- Compact design
- Easy to handle
- Suitable for measuring surface roughness directly on the clamped workpiece during production or stationary inspections
- Large, easy-to-read 6 cm (2.4'') colour LCD display, can be rotated electronically
- Profiles displayed in real time
- Integrated memory for 10 measurement conditions
- Memory can be expanded with a micro SD card up to max. 2 GB: e.g. 500 measurement conditions + 10,000 measurement values or 500 measurement conditions + 500 profiles, analysis software on request
- With RS232C, Digimatic and USB interfaces
- Foot switch connector
- Colour-based tolerance evaluation
- Allocation of access rights
- Choice of 16 languages
- Switchable mains or battery operation
- Feed unit can either be integrated in the device or used separately with a connection cable
- Motorised feed with up to 3 user-selectable measuring speeds
- Probe system skid radius 40 mm, skid pressure force < 400 mN
- Probe tip geometry in accordance with DIN EN ISO 3274, radius 2 μm, point angle 60°
- Double skid system for measuring sheet metal in accordance with DIN EN ISO 10049 available on request, comprehensive optional accessories on the following pages
- Technical data
Profiles: Roughness profile (R), DF profile, R motif
Standards: DIN EN ISO, VDA, ANSI, JIS, user-defined conditions
Measurement range: 360 µm
Evaluation parameters: Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, Rmax, Rz1max, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR
Cut-off lengths: λc: 0.08, 0.25, 0.8 and 2.5 mm
Digital filters: Gaussian, 2CR75, PC75
Number of individual measurement sections: 1 to 10
Limit wavelength λs: Set to specification
Measuring force: 0.75 mN
Power supply: Mains adapter 230 V, 50 Hz and fitted battery - Supplied with roughness standard, mains adapter, protective film for the display, carry bag and operating manual
from 4.460,00 €
Prices excl. VAT plus shipping costs
- Brand: MITUTOYO
- Article no.: 5705260310
Product description
570526 Surface roughness testing equipment Surftest SJ-310Surftest SJ-210 surface roughness tester- Portable mains-independent skid system for determining surface roughness
- Separate feed allows measurements in hard-to-reach places, as well as overhead measurements
- Dust-protected, touch-sensitive control panel and integrated printer
- Extremely easy-to-use and intuitive menu navigation
- Measurement results / profiles shown clearly on a 14.5 cm (5.7”) colour display
- 16 languages
- Storage of up to 10 measurement conditions
- Statistics function and colour-coded tolerance analysis
- Customisable password protection
- Storage of measurement data on an optional SD card
- Automated calibration function / can be calibrated based on the average of up to 12 measurements
- Choice of mains or battery operation
- Profile method with single skid system
- Measurement range: X-axis feed = 16 mm, S feed = 5.6 mm
- 60° contact point with 2 µm radius / measuring force 0.75 mN
- Measuring speed: 0.25 mm/s, 0.5 mm/s, 0.75 mm/s
- Analysis parameters: Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, Rmax, Rz1max , S, HSC, RzJIS, Rppi, R?a, R?q, Rlr, Rmr, Rmr(c), Rdc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, ?a, ?q, Lo, Rpm, tp, Htp, R, RX, AR, W, AW, Wx, Wte
- Cut-off length: 0.08 mm / 0.25 mm / 0.8 mm / 2.5 mm / 8 mm
- Number of individual measurement sections: 1x, 2x, 3x, 4x, 5x, 6x, 7x, 8x, 9x, 10x, unset length
- Digital filter: 2CR75 / PC75 / Gaussian
- Parameters in accordance with DIN EN ISO, VDA, JIS, ANSI and MOTIF
- Data communication: Digimatic, RS-232, SD memory card
- Supplied with roughness standard, mains adapter and 5 rolls of spare paper
Surftest SJ-210 surface roughness tester- Portable mains-independent skid system for determining surface roughness
- Separate feed allows measurements in hard-to-reach places, as well as overhead measurements
- Dust-protected, touch-sensitive control panel and integrated printer
- Extremely easy-to-use and intuitive menu navigation
- Measurement results / profiles shown clearly on a 14.5 cm (5.7”) colour display
- 16 languages
- Storage of up to 10 measurement conditions
- Statistics function and colour-coded tolerance analysis
- Customisable password protection
- Storage of measurement data on an optional SD card
- Automated calibration function / can be calibrated based on the average of up to 12 measurements
- Choice of mains or battery operation
- Profile method with single skid system
- Measurement range: X-axis feed = 16 mm, S feed = 5.6 mm
- 60° contact point with 2 µm radius / measuring force 0.75 mN
- Measuring speed: 0.25 mm/s, 0.5 mm/s, 0.75 mm/s
- Analysis parameters: Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, Rmax, Rz1max , S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, λa, λq, Lo, Rpm, tp, Htp, R, RX, AR, W, AW, Wx, Wte
- Cut-off length: 0.08 mm / 0.25 mm / 0.8 mm / 2.5 mm / 8 mm
- Number of individual measurement sections: 1x, 2x, 3x, 4x, 5x, 6x, 7x, 8x, 9x, 10x, unset length
- Digital filter: 2CR75 / PC75 / Gaussian
- Parameters in accordance with DIN EN ISO, VDA, JIS, ANSI and MOTIF
- Data communication: Digimatic, RS-232, SD memory card
- Supplied with roughness standard, mains adapter and 5 rolls of spare paper
from 4.950,00 €
Prices excl. VAT plus shipping costs
- Brand: MITUTOYO
- Article no.: 5705280411
- Catalogue page: KS-1504
Product description
570528 Surface roughness testing equipment Surftest SJ-410Surftest SJ-411 / 412 surface roughness tester- Portable mains-independent reference level system for determining the primary profile P, surface roughness R and ripple W
- Dust-protected, touch-sensitive control panel and integrated printer
- Extremely easy-to-use and intuitive menu navigation
- Measurement results / profiles shown on a 14.5 cm (5.7”) colour display.
- Radius and incline compensation
- 16 languages
- D.A.T. function (Digital Adjustment Tilting)
- 5 probes can be calibrated independently of one another
- Storage of up to 10 measurement conditions
- Statistics function and colour-coded tolerance analysis
- Customisable password protection
- Storage of measurement data on an optional SD card
- Automated calibration function / can be calibrated based on the average of up to 12 measurements
- Choice of mains or battery operation
- Measurement procedure = reference level measuring system
- Measurement ranges: Z-axis: adjustable 800 (up to 2,400 µm) / 80 / 8 µm
X axis SJ-411 = 25 mm / SJ-412 = 50 mm - 60° contact point with 2 µm radius / measuring force 0.75 mN
- Measuring speed: 0.05 mm/s, 0.1 mm/s, 0.2 mm/s, 0.5 mm/s, 1 mm/s
- Analysis parameters: Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Sk, Rku, Rc, RPc, RSm, Rmax,
Rz1max, S, HSC, RzJIS, Rppi, R?a, R?q, Rlr, Rmr, Rmr(C), Rdc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, ?a, ?q, Lo, Rpm, tp, Htp, R, Rx, AR, W, AW, Wx, Wte - Analysis profiles: P-profile (P), R-profile (R), filtered ripple profile (W), R-motif, W-motif
- Parameters in accordance with DIN EN ISO, VDA, JIS, ANSI and MOTIF
- Cut-off length: 0.08 mm / 0.25 mm / 0.8 mm / 2.5 mm / 8 mm
- Number of individual measurement sections: 1x, 2x, 3x, 4x, 5x to 20x, unset length
- Digital filter: 2CR75 / PC75 / Gaussian
- Data communication: Digimatic, RS-232, SD memory card
- Supplied with roughness standard, mains adapter and 5 rolls of spare paper
Surftest SJ-411 / 412 surface roughness tester- Portable mains-independent reference level system for determining the primary profile P, surface roughness R and ripple W
- Dust-protected, touch-sensitive control panel and integrated printer
- Extremely easy-to-use and intuitive menu navigation
- Measurement results / profiles shown on a 14.5 cm (5.7”) colour display.
- Radius and incline compensation
- 16 languages
- D.A.T. function (Digital Adjustment Tilting)
- 5 probes can be calibrated independently of one another
- Storage of up to 10 measurement conditions
- Statistics function and colour-coded tolerance analysis
- Customisable password protection
- Storage of measurement data on an optional SD card
- Automated calibration function / can be calibrated based on the average of up to 12 measurements
- Choice of mains or battery operation
- Measurement procedure = reference level measuring system
- Measurement ranges: Z-axis: adjustable 800 (up to 2,400 µm) / 80 / 8 μm
X axis SJ-411 = 25 mm / SJ-412 = 50 mm - 60° contact point with 2 µm radius / measuring force 0.75 mN
- Measuring speed: 0.05 mm/s, 0.1 mm/s, 0.2 mm/s, 0.5 mm/s, 1 mm/s
- Analysis parameters: Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Sk, Rku, Rc, RPc, RSm, Rmax,
Rz1max, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(C), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, λa, λq, Lo, Rpm, tp, Htp, R, Rx, AR, W, AW, Wx, Wte - Analysis profiles: P-profile (P), R-profile (R), filtered ripple profile (W), R-motif, W-motif
- Parameters in accordance with DIN EN ISO, VDA, JIS, ANSI and MOTIF
- Cut-off length: 0.08 mm / 0.25 mm / 0.8 mm / 2.5 mm / 8 mm
- Number of individual measurement sections: 1x, 2x, 3x, 4x, 5x to 20x, unset length
- Digital filter: 2CR75 / PC75 / Gaussian
- Data communication: Digimatic, RS-232, SD memory card
- Supplied with roughness standard, mains adapter and 5 rolls of spare paper
from 9.350,00 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?