Measuring

Tool pre-setting devices

Product finder

Product finder
PostBackSource:NULL
More filters
520090 ImageController 1 with screen in portrait format
  • Brand: ATORN®
  • Article no.: 5200901350
  • Catalogue page: KS-1433
Product description
520090 ImageController 1 with screen in portrait formatBase support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

ImageController 1
In addition to ImageController Basic:
  • 13.3" TFT touchscreen monitor with 20x magnification
  • Stable undertable with adapter tray
  • Spindle brake and 4x90° spindle indexing
  • Label printing system
  • Illuminated cutting edge inspection
  • Tool management, projector function
  • Turning centre measurement (optional)
  • Network-compatible (optional)
  • Communication with machine tool (optional)

Base support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

ImageController 1
In addition to ImageController Basic:
  • 13.3" TFT touchscreen monitor with 20x magnification
  • Stable undertable with adapter tray
  • Spindle brake and 4x90° spindle indexing
  • Label printing system
  • Illuminated cutting edge inspection
  • Tool management, projector function
  • Turning centre measurement (optional)
  • Network-compatible (optional)
  • Communication with machine tool (optional)

Directly from the manufacturer
from 10.600,00 €
Prices excl. VAT plus shipping costs
(4) Versions
520090 ImageController 2, with screen in landscape format
  • Brand: ATORN®
  • Article no.: 5200902350
  • Catalogue page: KS-1434
Product description
520090 ImageController 2, with screen in landscape formatBase support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

ImageController 2
  • Screen size 13.3"
  • Touchscreen display (magnification 20x)
  • additional options for ImageController 1:
    - Creation of tooling sheets (optional)
    - Autofocus spindle (optional)

Base support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

ImageController 2
  • Screen size 13.3"
  • Touchscreen display (magnification 20x)
  • additional options for ImageController 1:
    - Creation of tooling sheets (optional)
    - Autofocus spindle (optional)

Directly from the manufacturer
from 11.900,00 €
Prices excl. VAT plus shipping costs
(4) Versions
520090 ImageController Basic
  • Brand: ATORN®
  • Article no.: 5200900350
  • Catalogue page: KS-1433
Product description
520090 ImageController BasicBase support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

ImageController Basic
  • 7" TFT colour screen with 12x enlargement and dial/push-button operation
  • The simple software allows for fast training at minimal training expense
  • ATORN 420 and 600 with gap gauge 100 mm

Base support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

ImageController Basic
  • 7" TFT colour screen with 12x enlargement and dial/push-button operation
  • The simple software allows for fast training at minimal training expense
  • ATORN 420 and 600 with gap gauge 100 mm

Directly from the manufacturer
from 7.600,00 €
Prices excl. VAT plus shipping costs
(3) Versions
520090 ImageController 3
  • Brand: ATORN®
  • Article no.: 5200903601
Product description
520090 ImageController 3Base support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

Base support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

Directly from the manufacturer
from 15.850,00 €
Prices excl. VAT plus shipping costs
(2) Versions
520090 ImageController 2 with 24' Panel PC
  • Brand: ATORN®
  • Article no.: 5200902324
  • Catalogue page: KS-1434
Product description
520090 ImageController 2 with 24' Panel PCBase support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

ImageController 2
  • Screen size 24"
  • Panel PC (magnification 38x)
  • additional options for ImageController 1:
    - Creation of tooling sheets (optional)
    - Autofocus spindle (optional)

Base support and reduction with integrated calibration edge

Tool pre-setting devices 350/420/600 with ImageController
  • Robust tool pre-setting devices for workshop use
  • Quick measuring, setting and testing tools
  • SK50 high accuracy spindle with integrated calibration edge
  • Pneumatic spindle clamping unit
  • Simple setup of different zero points (max. 99)
  • Different measuring programs e.g. to carry out concentricity and axial run-out measurements on the tool cutting edge
  • CCD camera with telecentric lens
  • Dynamic crosshair for automatic measurements
  • EZmax software function for calculating and measuring the tool contour
  • Supplied ex works, excluding packaging

ImageController 2
  • Screen size 24"
  • Panel PC (magnification 38x)
  • additional options for ImageController 1:
    - Creation of tooling sheets (optional)
    - Autofocus spindle (optional)

Directly from the manufacturer
from 12.800,00 €
Prices excl. VAT plus shipping costs
(4) Versions