- Brand: ATORN®
- Article no.: 4588000125
- Catalogue page: KS-1260
Product description
458800 NC high-pressure machine vice ATORN® MM-G, mechanical / mechanicalMM-G NC high-pressure machine vice- Mechanical/mechanical
- Base body made from spheroidal graphite iron
- Base clamping
- Pull-down jaws and other accessories available on request
- Stepped jaws, reversible, hardened and ground
- Long clamping slide assembly including a transverse slot drive spindle with pre-set clamping force
- M12 mounting thread for workpiece stop
- Clamping surfaces for clamping claws
- Rugged chip guard prevents chip ingress into the body
- Incl. clamping fitting bore (pitch 200 mm) for ATORN zero-point clamping system
Compact clamp- Incl. stepped jaws and regulator
MM-G NC high-pressure machine vice- Mechanical/mechanical
- Base body made from spheroidal graphite iron
- Base clamping
- Pull-down jaws and other accessories available on request
- Stepped jaws, reversible, hardened and ground
- Long clamping slide assembly including a transverse slot drive spindle with pre-set clamping force
- M12 mounting thread for workpiece stop
- Clamping surfaces for clamping claws
- Rugged chip guard prevents chip ingress into the body
- Incl. clamping fitting bore (pitch 200 mm) for ATORN zero-point clamping system
Compact clamp- Incl. stepped jaws and regulator
from 1.679,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4581001125
- Catalogue page: KS-1258
Product description
458100 NC high-pressure machine vice ATORN® MH-SNC high-pressure machine vice MH-S 125- Mechanical/hydraulic
- Robust steel base body
- Hardened and ground guideways
- Repetition precision ≤ 0.01 mm
- Versions with fastening bores for lateral clamping available on request, for bed length D = 470 mm, attachment screws for groove spacing 63 mm and 100 mm are pre-mounted
- Locating pin for quick pre-positioning
- Simple cleaning due to removable upper slides
- Bed lengths up to 1200 mm and hydraulically-controlled versions available on request
- Supplied with jaws and hand crank
Standard version mech./hydr.NC high-pressure machine vice MH-S 125- Mechanical/hydraulic
- Robust steel base body
- Hardened and ground guideways
- Repetition precision ≤ 0.01 mm
- Versions with fastening bores for lateral clamping available on request, for bed length D = 470 mm, attachment screws for groove spacing 63 mm and 100 mm are pre-mounted
- Locating pin for quick pre-positioning
- Simple cleaning due to removable upper slides
- Bed lengths up to 1200 mm and hydraulically-controlled versions available on request
- Supplied with jaws and hand crank
Standard version mech./hydr.
from 2.499,00 €
Prices excl. VAT plus shipping costs
- Brand: HILMA
- Article no.: 4570200100
- Catalogue page: KS-1256
Product description
457020 (klasse)NC NC high-pressure machine vice- Type NC, mechanical-hydraulic
- Versatile and flexible
- Longitudinal and transverse slots as standard for quick positioning
- Slots and threaded bores on slide and fixed jaw for holding standard and special large-span jaws
- Threaded bores on both sides for workpiece stops
- Clamping edge for clamping claws
- Guideways hardened and ground
- Desired clamping range can be roughly pre-selected via socket pin
- Resistant to deformation thanks to the new bottom cross section and new fixed jaw
- Mounting hole layout for extra high clamping jaws
- For tool and mould making, fixture construction, production
- Supplied with standard smooth/grooved indexable jaws, hand crank, operating manual
- Longer versions and clamping force monitoring available on request (cannot be retrofitted!)
NC NC high-pressure machine vice- Type NC, mechanical-hydraulic
- Versatile and flexible
- Longitudinal and transverse slots as standard for quick positioning
- Slots and threaded bores on slide and fixed jaw for holding standard and special large-span jaws
- Threaded bores on both sides for workpiece stops
- Clamping edge for clamping claws
- Guideways hardened and ground
- Desired clamping range can be roughly pre-selected via socket pin
- Resistant to deformation thanks to the new bottom cross section and new fixed jaw
- Mounting hole layout for extra high clamping jaws
- For tool and mould making, fixture construction, production
- Supplied with standard smooth/grooved indexable jaws, hand crank, operating manual
- Longer versions and clamping force monitoring available on request (cannot be retrofitted!)
from 2.339,00 €
Prices excl. VAT plus shipping costs
- Brand: KESEL
- Article no.: 4561000090
Product description
456100 NC high-pressure machine vice NCANCA high-pressure vice- Mechanical/mechanical
- Allmatic-compatible jaw interface
- Quick-change system of spindle unit
- Kesel and Allmatic step click frame system
- Maintenance-free enclosed spindle
- Mechanical force booster
NCA high-pressure vice- Mechanical/mechanical
- Allmatic-compatible jaw interface
- Quick-change system of spindle unit
- Kesel and Allmatic step click frame system
- Maintenance-free enclosed spindle
- Mechanical force booster
from 2.189,00 €
Prices excl. VAT plus shipping costs
- Brand: HILMA
- Article no.: 4570800100
Product description
457080 NC high-pressure machine vice Hilma KNCKNC NC high-pressure machine vice- KNC type, mechanical-hydraulic
- For the toughest requirements
- Fully encapsulated spindle and power transmission, reliable protection against chips
- With stepped indexable jaws as standard, smooth rear side, with connection bores for almost all HILMA clamping jaw systems
- Desired clamping range can be roughly pre-selected via socket pin
- Locking device for mechanically clamping sensitive workpieces (optional accessories)
- All-steel design with internal slide guide
- 20 H7 cross slots for horizontal clamping
KNC NC high-pressure machine vice- KNC type, mechanical-hydraulic
- For the toughest requirements
- Fully encapsulated spindle and power transmission, reliable protection against chips
- With stepped indexable jaws as standard, smooth rear side, with connection bores for almost all HILMA clamping jaw systems
- Desired clamping range can be roughly pre-selected via socket pin
- Locking device for mechanically clamping sensitive workpieces (optional accessories)
- All-steel design with internal slide guide
- 20 H7 cross slots for horizontal clamping
from 2.459,00 €
Prices excl. VAT plus shipping costs
- Brand: RÖHM
- Article no.: 4582000092
Product description
458200 RKE NC high-pressure machine viceRKE NC high-pressure machine vice- Particularly suitable for use on machining centres
- Horizontal, lateral, or vertical clamping with a base plate, for example as a DUO clamping tower (back to back)
- Size 92
Mechanical-hydraulic clamping system with power transmission, manually operated. - Size 125, 160
Mechanical-mechanical clamping system with power transmission, manually operated - Base body and all guides are hardened and ground on all sides
- Long clamping slide with transverse slots, hardened on all sides, functional surfaces ground
- Drive spindle with pre-set clamping force
- Clamping surface for clamping claws
- Central lubrication fitting for easy guide and spindle thread lubrication
- Stable chip guard prevents chips from entering into the body
- Threaded bores for holding all RÖHM flat clamping jaws with jaw widths of 125 / 160 mm
- Angle drive connecting thread
NC compact clampRKE NC high-pressure machine vice- Particularly suitable for use on machining centres
- Horizontal, lateral, or vertical clamping with a base plate, for example as a DUO clamping tower (back to back)
- Size 92
Mechanical-hydraulic clamping system with power transmission, manually operated. - Size 125, 160
Mechanical-mechanical clamping system with power transmission, manually operated - Base body and all guides are hardened and ground on all sides
- Long clamping slide with transverse slots, hardened on all sides, functional surfaces ground
- Drive spindle with pre-set clamping force
- Clamping surface for clamping claws
- Central lubrication fitting for easy guide and spindle thread lubrication
- Stable chip guard prevents chips from entering into the body
- Threaded bores for holding all RÖHM flat clamping jaws with jaw widths of 125 / 160 mm
- Angle drive connecting thread
NC compact clamp
from 2.829,00 €
Prices excl. VAT plus shipping costs
- Brand: FRESMAK
- Article no.: 4586500125
Product description
458650 NC high-pressure machine vice Arnold-Mat, mechanical / mechanicalNC high-pressure machine vice
Without regulator
NC high-pressure machine vice
Without regulator
from 2.719,00 €
Prices excl. VAT plus shipping costs
- Brand: FRESMAK
- Article no.: 4586510125
Product description
458651 NC high-pressure machine vice Arnold-Mat, mechanical / hydraulicNC high-pressure machine vice
Without regulator
NC high-pressure machine vice
Without regulator
from 2.719,00 €
Prices excl. VAT plus shipping costs
- Brand: FRESMAK
- Article no.: 4586530125
Product description
458653 NC high-pressure machine vice Arnold-Mat, mech./mech. with regulatorNC high-pressure machine vice
With regulator
NC high-pressure machine vice
With regulator
from 2.839,00 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 4588010125
- Catalogue page: KS-1260
Product description
458801 NC high-pressure machine vice ATORN® MM-G, w./m. oscillating tr.jawsMM-G NC high-pressure machine vice- Mechanical/mechanical
- Base body made from spheroidal graphite iron
- Base clamping
- Pull-down jaws and other accessories available on request
- Stepped jaws, reversible, hardened and ground
- Long clamping slide assembly including a transverse slot drive spindle with pre-set clamping force
- M12 mounting thread for workpiece stop
- Clamping surfaces for clamping claws
- Rugged chip guard prevents chip ingress into the body
- Incl. clamping fitting bore (pitch 200 mm) for ATORN zero-point clamping system
With pendulum jaws and collar insertsMM-G NC high-pressure machine vice- Mechanical/mechanical
- Base body made from spheroidal graphite iron
- Base clamping
- Pull-down jaws and other accessories available on request
- Stepped jaws, reversible, hardened and ground
- Long clamping slide assembly including a transverse slot drive spindle with pre-set clamping force
- M12 mounting thread for workpiece stop
- Clamping surfaces for clamping claws
- Rugged chip guard prevents chip ingress into the body
- Incl. clamping fitting bore (pitch 200 mm) for ATORN zero-point clamping system
With pendulum jaws and collar inserts
from 2.999,00 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?