Clamping
Manufacturer catalogs & special catalogs

Tool holder accessories

Product finder
Filter by:
Alle Filter anzeigen
431010 Clamping nut for ER collets
  • Article no.: 4310100016
  • Catalogue page: KS-1208
Product description
431010 Clamping nut for ER colletsER clamping nuts
  • For collets in accordance with DIN 6499 (ER/ESX)
  • Case-hardened and ground, suitable for increased speeds

Standard
  • 56-60 HRC, pre-balanced

in stock
from 27,20 €
Prices excl. VAT plus shipping costs
(5) Versions
431012 Weldon clamping screw DIN 1835 B
  • Article no.: 4310120006
  • Catalogue page: KS-1214
Product description
431012 Weldon clamping screw DIN 1835 BClamping screws for milling cutter holding fixtures, DIN 6359
Weldon clamping screws, DIN 1835 B
  • For clamping DIN 1835 B straight shanks in DIN 6359/1835 Part 2 - 3 milling cutter arbours (Weldon jaw chuck)
  • For standard and long chuck designs
  • Clamping screws for short chuck versions (Ø 16 / 20 / 25 A = 35 mm, Ø 32 A = 65 mm) available on request

in stock
from 2,80 €
Prices excl. VAT plus shipping costs
(8) Versions
400561 ATORN chip booster
  • Brand: ATORN®
  • Article no.: 4005610125
  • Catalogue page: KS-1176
Product description
400561 ATORN chip boosterChip booster
  • Made from high-strength anodised aluminium
  • Automatic cleaning of machine tool working area
  • Reduced auxiliary processing times
  • Low compressed air consumption
  • Central coolant supply
  • Balanced to G 2.5 / 12,000 rpm

Directly from the manufacturer
from 340,00 €
Prices excl. VAT plus shipping costs
(1) Versions
400562 Air and emulsion rinsing head
  • Brand: SARA®
  • Article no.: 4005620001
  • Catalogue page: KS-1176
Product description
400562 Air and emulsion rinsing headCleaning nozzle SARA-JET
  • For cleaning the interior of your CNC machine
  • Suitable for use with air or cooling lubricant
  • Complex set-ups can be rinsed effectively
  • Slow spindle rotation cleans all of the working area
  • Nozzles are infinitely adjustable in angle
  • Each nozzle can be closed separately if required
  • Recommended max. rotational speed 500 rpm
  • Use with Weldon chuck Ø 16 mm or collet chuck with sealed collet Ø 16 mm

Air and emulsion rinsing head
in stock
from 123,50 €
Prices excl. VAT plus shipping costs
(1) Versions
431240 Roller clamping key RO30 with handle for clamping nuts HPC
  • Brand: FAHRION
  • Article no.: 4312403016
  • Catalogue page: KS-1186
Product description
431240 Roller clamping key RO30 with handle for clamping nuts HPCAccessories for CENTRO|P and ATORN precision ER collet chuck
Roller chuck key
in stock
from 72,00 €
Prices excl. VAT plus shipping costs
(3) Versions
438030 ER clamping key, standard
  • Article no.: 4380300016
  • Catalogue page: KS-1213
Product description
438030 ER clamping key, standardChuck key
  • For DIN 6499 type ER clamping nuts, DIN 1804 slotted nuts and DIN 981 roller bearing nuts
  • Special steel

Standard
in stock
from 15,40 €
Prices excl. VAT plus shipping costs
(5) Versions
438031 Clamping key, mini
  • Article no.: 4380310011
  • Catalogue page: KS-1213
Product description
438031 Clamping key, miniChuck key
  • For DIN 6499 type ER clamping nuts, DIN 1804 slotted nuts and DIN 981 roller bearing nuts
  • Special steel

Mini
in stock
from 19,50 €
Prices excl. VAT plus shipping costs
(3) Versions
438061 Data holder Easy-tag, SK40/HSK63
  • Article no.: 4380610001
  • Catalogue page: KS-1172
Product description
438061 Data holder Easy-tag, SK40/HSK63Systematic labelling

Data holders
  • Clear marking of tool holders
  • Tidy-looking tool storage
  • Made of plastic
  • Minimised tooling time
  • Tool optimisation through different colours

for SK40 / HSK63
in stock
from 4,80 €
Prices excl. VAT plus shipping costs
(6) Versions
420250 Engraving chuck ET0
  • Brand: BILZ
  • Article no.: 4202501021
  • Catalogue page: KS-1176
Product description
420250 Engraving chuck ET0Engraving chuck ET0
  • Engraving on almost all surfaces
  • For materials such as plastic / aluminium / steel up to max. 57 HRC
  • Adjustable engraving hardness (engraving depth)
  • High wear resistance of the engraving tip with rolling ball
  • Compensation of unevenness
  • Cleaning of the workpiece surface by internal compressed air feed-through up to max. 10 bar - no coolant
  • Compressed air ducts with different angles of attack
  • Tool holder Ø 20 mm collet / Weldon holders
  • Supplied with engraving tip

For holders Ø 20 mm
in stock
from 116,00 €
Prices excl. VAT plus shipping costs
(2) Versions
431021 Sealing washer HP25-DI
  • Brand: FAHRION
  • Article no.: 4310210030
  • Catalogue page: KS-1208
Product description
431021 Sealing washer HP25-DISealing washers for ER collet chucks
  • For ER clamping nuts, 431019....
  • For Fahrion clamping nuts CENTRO|P (HPC-DI) 431237....
  • Please specify shank Ø dimension in mm as four-digit figure (Example HP25 DI Ø8.5 = 431021 0085)

Bridging range -0.1 / +0.4 mm
subsequent delivery
from 18,00 €
Prices excl. VAT plus shipping costs
(29) Versions
438001 Milling cutter tightening screw DIN6367
  • Article no.: 4380010008
  • Catalogue page: KS-1226
Product description
438001 Milling cutter tightening screw DIN6367Cutter retaining screw for shell-type milling cutter arbours
in stock
from 8,10 €
Prices excl. VAT plus shipping costs
(6) Versions
438020 Follower ring DIN6366 for shell-type milling cutter arbour
  • Article no.: 4380200016
  • Catalogue page: KS-1225
Product description
438020 Follower ring DIN6366 for shell-type milling cutter arbourFollower rings
  • For shell-type milling cutter arbours

subsequent delivery
from 17,50 €
Prices excl. VAT plus shipping costs
(5) Versions
431010 Clamping nut mini for ER collets
  • Article no.: 4310101016
  • Catalogue page: KS-1208
Product description
431010 Clamping nut mini for ER colletsER clamping nuts
  • For collets in accordance with DIN 6499 (ER/ESX)
  • Case-hardened and ground, suitable for increased speeds

Mini nuts
  • 50-54 HRC, ground on all sides
  • Small constructional dimensions

in stock
from 29,20 €
Prices excl. VAT plus shipping costs
(3) Versions
431020 Sealing washer HP16-DI
  • Brand: FAHRION
  • Article no.: 4310200030
  • Catalogue page: KS-1208
Product description
431020 Sealing washer HP16-DISealing washers for ER collet chucks
  • For ER clamping nuts, 431019....
  • For Fahrion clamping nuts CENTRO|P (HPC-DI) 431237....
  • Please specify shank Ø dimension in mm as four-digit figure (Example HP25 DI Ø8.5 = 431021 0085)

Bridging range -0.1 / +0.4 mm
subsequent delivery
from 18,00 €
Prices excl. VAT plus shipping costs
(17) Versions
431022 Sealing washer HP32-DI
  • Brand: FAHRION
  • Article no.: 4310220030
  • Catalogue page: KS-1208
Product description
431022 Sealing washer HP32-DISealing washers for ER collet chucks
  • For ER clamping nuts, 431019....
  • For Fahrion clamping nuts CENTRO|P (HPC-DI) 431237....
  • Please specify shank Ø dimension in mm as four-digit figure (Example HP25 DI Ø8.5 = 431021 0085)

Bridging range -0.1 / +0.4 mm
subsequent delivery
from 18,65 €
Prices excl. VAT plus shipping costs
(32) Versions
431242 Torque roller clamp. key attachment DRO30 f. clamping nut HPC16/HPC1 DI
  • Brand: FAHRION
  • Article no.: 4312423016
  • Catalogue page: KS-1186
Product description
431242 Torque roller clamp. key attachment DRO30 f. clamping nut HPC16/HPC1 DIAccessories for CENTRO|P and ATORN precision ER collet chuck
Torque roller chuck key attachment
Accessories for CENTRO|P and ATORN precision ER collet chuck
Torque roller chuck key attachment
  • Type = article number for suitable torque wrench

in stock
from 72,00 €
Prices excl. VAT plus shipping costs
(3) Versions
436313 Test mandrel DIN ISO 7388-1A
  • Brand: DIEBOLD
  • Article no.: 4363134040
  • Catalogue page: KS-1442
Product description
436313 Test mandrel DIN ISO 7388-1ATest mandrels
  • Stepped hollow bore
  • Forged, case-hardened (HRC 58+2)
  • Precision-ground diameter and flat surface
  • Taper tolerance AT3, radial run-out < 0.003 mm
  • Supplied in wooden box for vertical storage with test certificate

DIN ISO 7388-1 / DIN 69871 A
subsequent delivery
from 414,00 €
Prices excl. VAT plus shipping costs
(3) Versions
438010 Milling cutter tightening screw, strong locking effect
  • Article no.: 4380100008
  • Catalogue page: KS-1221
Product description
438010 Milling cutter tightening screw, strong locking effectCutter retaining screw for milling cutter arbours
  • For milling cutter arbours, holding fixtures for cutter heads and milling cutters with transverse slots
  • The different pitches of the two threads on the threaded bolt create a strong locking effect. The milling cutter is securely clamped without a major exertion of force, tube extensions or hammer blows.

subsequent delivery
from 10,80 €
Prices excl. VAT plus shipping costs
(6) Versions
438062 Data holder Easy-tag SK50/HSK100
  • Article no.: 4380620001
  • Catalogue page: KS-1172
Product description
438062 Data holder Easy-tag SK50/HSK100Systematic labelling

Data holders
  • Clear marking of tool holders
  • Tidy-looking tool storage
  • Made of plastic
  • Minimised tooling time
  • Tool optimisation through different colours

for SK50 / HSK100
subsequent delivery
from 5,75 €
Prices excl. VAT plus shipping costs
(6) Versions
400560 Taper wiper for SK
  • Article no.: 4005600030
  • Catalogue page: KS-1172
Product description
400560 Taper wiper for SKTaper wiper
  • SK and MT wipers with robust wooden body and felt strips
  • HSK wipers with robust plastic body and felt strips
  • For cleaning the internal taper on machines and sleeves
  • Felt strips resistant to oil and emulsions
  • High absorption capacity
  • Long service life

Steep-angle taper wiper
subsequent delivery
from 16,70 €
Prices excl. VAT plus shipping costs
(3) Versions
431340 Roller chuck key for Heavy Duty HDC
  • Brand: FAHRION
  • Article no.: 4313405301
  • Catalogue page: KS-1188
Product description
431340 Roller chuck key for Heavy Duty HDCTrue-running accuracy 1 µm

Heavy Duty clamping nut HDC-32
  • High stability and radial rigidity with reinforced chuck body
  • Trapezoidal fine thread in the clamping nut leads to optimum conversion of the tightening torques into clamping force
  • Ball bearing-mounted clamping nut prevents twisting of the collet and reduces vibrations
  • High concentricity due to full fit of the collet in the chuck cone
  • Delivery includes clamping nut without roller clamping key

Roller chuck key
in stock
from 91,30 €
Prices excl. VAT plus shipping costs
(2) Versions
431013 Whistle-Notch clamping screw
  • Article no.: 4310130006
  • Catalogue page: KS-1215
Product description
431013 Whistle-Notch clamping screwClamping screws for milling cutter holding fixtures, DIN 6359
Whistle-notch clamping screws, DIN 1835 E
  • Version with ball
  • For clamping DIN 1835 E straight shanks (with suitable clamping surface) in DIN 6359/1835 Part 2 - 3 milling cutter arbours (Weldon jaw chuck)
  • Clamping screws for short chuck versions (Ø 16/20/25 A = 35 mm, Ø 32 A = 65 mm) available on request

in stock
from 4,48 €
Prices excl. VAT plus shipping costs
(8) Versions
438032 Clamping key for UltraGrip® and UltraJet®
  • Brand: DIEBOLD
  • Article no.: 4380320020
  • Catalogue page: KS-1192
Product description
438032 Clamping key for UltraGrip® and UltraJet®Accessories for UltraJet®
Chuck key
subsequent delivery
from 24,20 €
Prices excl. VAT plus shipping costs
(2) Versions
400560 Taper wiper for HSK
  • Article no.: 4005601032
  • Catalogue page: KS-1172
Product description
400560 Taper wiper for HSKTaper wiper
  • SK and MT wipers with robust wooden body and felt strips
  • HSK wipers with robust plastic body and felt strips
  • For cleaning the internal taper on machines and sleeves
  • Felt strips resistant to oil and emulsions
  • High absorption capacity
  • Long service life

Hollow taper wiper
subsequent delivery
from 65,10 €
Prices excl. VAT plus shipping costs
(5) Versions
400560 Taper wiper for MK
  • Article no.: 4005600001
  • Catalogue page: KS-1172
Product description
400560 Taper wiper for MKTaper wiper
  • SK and MT wipers with robust wooden body and felt strips
  • HSK wipers with robust plastic body and felt strips
  • For cleaning the internal taper on machines and sleeves
  • Felt strips resistant to oil and emulsions
  • High absorption capacity
  • Long service life

Morse taper wiper
in stock
from 4,38 €
Prices excl. VAT plus shipping costs
(5) Versions
431011 Coolant transfer pipe
  • Article no.: 4310110004
  • Catalogue page: KS-1173
Product description
431011 Coolant transfer pipeCoolant transfer pipe
  • For optimising the central coolant supply
  • For DIN 69893-HSK-A hollow shank tapers, with two mounted sealing rings

in stock
from 13,60 €
Prices excl. VAT plus shipping costs
(10) Versions
431018 Key for coolant transfer pipe
  • Article no.: 4310180050
  • Catalogue page: KS-1173
Product description
431018 Key for coolant transfer pipeCoolant transfer pipe key
in stock
from 12,76 €
Prices excl. VAT plus shipping costs
(6) Versions
431019 Clamping nut type B for sealing discs for ER collets
  • Brand: FAHRION
  • Article no.: 4310190016
  • Catalogue page: KS-1208
Product description
431019 Clamping nut type B for sealing discs for ER colletsER clamping nuts
  • For collets in accordance with DIN 6499 (ER/ESX)
  • Case-hardened and ground, suitable for increased speeds

Type HP for sealing washers
  • 56-60 HRC, pre-balanced
  • For holding HP sealing washers
  • Operating pressure up to 80 bar

subsequent delivery
from 35,70 €
Prices excl. VAT plus shipping costs
(4) Versions
431023 Sealing washer HP40-DI
  • Brand: FAHRION
  • Article no.: 4310230035
  • Catalogue page: KS-1208
Product description
431023 Sealing washer HP40-DISealing washers for ER collet chucks
  • For ER clamping nuts, 431019....
  • For Fahrion clamping nuts CENTRO|P (HPC-DI) 431237....
  • Please specify shank Ø dimension in mm as four-digit figure (Example HP25 DI Ø8.5 = 431021 0085)

Bridging range -0.1 / +0.4 mm
in stock
from 9,08 €
Prices excl. VAT plus shipping costs
(36) Versions
431033 Weldon clamping screw DIN 913 - DIN 914
  • Brand: SARA®
  • Article no.: 4310330020
Product description
431033 Weldon clamping screw DIN 913 - DIN 914Clamping screws for milling cutter holding fixtures, DIN 6359
Weldon clamping screw DIN 913 - DIN 914
subsequent delivery
from 3,70 €
Prices excl. VAT plus shipping costs
(8) Versions
431112 Weldon clamping screw DIN 1835 B short version
  • Brand: SARA®
  • Article no.: 4311121601
Product description
431112 Weldon clamping screw DIN 1835 B short versionClamping screws for milling cutter holding fixtures, DIN 6359
Weldon clamping screws, DIN 1835 B
  • For clamping DIN 1835 B straight shanks in DIN 6359/1835 Part 2 - 3 milling cutter arbours (Weldon jaw chuck)
  • For standard and long chuck designs
  • Clamping screws for short chuck versions (Ø 16 / 20 / 25 A = 35 mm, Ø 32 A = 65 mm) available on request

subsequent delivery
from 7,95 €
Prices excl. VAT plus shipping costs
(3) Versions
431237 Clamping nut for Centro-P
  • Brand: FAHRION
  • Article no.: 4312370116
  • Catalogue page: KS-1186
Product description
431237 Clamping nut for Centro-PAccessories for CENTRO|P and ATORN precision ER collet chuck
Clamping nuts (nuts for HPC...-DI sealing washers)
in stock
from 16,92 €
Prices excl. VAT plus shipping costs
(6) Versions
431339 Heavy Duty clamping nut HDC 32
  • Brand: FAHRION
  • Article no.: 4313393201
Product description
431339 Heavy Duty clamping nut HDC 32True-running accuracy 1 µm

Heavy Duty clamping nut HDC-32
  • High stability and radial rigidity with reinforced chuck body
  • Trapezoidal fine thread in the clamping nut leads to optimum conversion of the tightening torques into clamping force
  • Ball bearing-mounted clamping nut prevents twisting of the collet and reduces vibrations
  • High concentricity due to full fit of the collet in the chuck cone
  • Delivery includes clamping nut without roller clamping key

Heavy duty clamping nut HDC32
subsequent delivery
from 83,00 €
Prices excl. VAT plus shipping costs
(1) Versions
434588 O-ring for Weldon mount with KK
  • Article no.: 4345880006
Product description
434588 O-ring for Weldon mount with KKO-ring for Weldon mount with KK
O-ring
subsequent delivery
from 1,18 €
Prices excl. VAT plus shipping costs
(11) Versions
436319 Test mandrel DIN 69893 HSK-A
  • Brand: DIEBOLD
  • Article no.: 4363194024
  • Catalogue page: KS-1442
Product description
436319 Test mandrel DIN 69893 HSK-ATest mandrels
  • Stepped hollow bore
  • Forged, case-hardened (HRC 58+2)
  • Precision-ground diameter and flat surface
  • Taper tolerance AT3, radial run-out < 0.003 mm
  • Supplied in wooden box for vertical storage with test certificate

DIN 69893 type A (HSK-A)
  • With 4 slots at the tapered end
  • For measuring at 0°, 90°, 180° and 270°

subsequent delivery
from 459,00 €
Prices excl. VAT plus shipping costs
(5) Versions
438002 Milling cutter tightening screw DIN6367 drilled through
  • Article no.: 4380020008
  • Catalogue page: KS-1226
Product description
438002 Milling cutter tightening screw DIN6367 drilled throughCutter retaining screw for shell-type milling cutter arbours
subsequent delivery
from 15,90 €
Prices excl. VAT plus shipping costs
(4) Versions
438005 Spanner DIN 6368 for shell-type milling cutter arbour
  • Brand: AMF
  • Article no.: 4380050016
  • Catalogue page: KS-1227
Product description
438005 Spanner DIN 6368 for shell-type milling cutter arbourKey for shell-type milling cutter arbours
  • For tightening DIN 6367 retaining screws
  • Special steel hardened and tempered to a burnished shade

in stock
from 20,10 €
Prices excl. VAT plus shipping costs
(6) Versions
438021 Carrier blocks for transverse slot shell-type milling arbour
  • Brand: SARA®
  • Article no.: 4380210040
Product description
438021 Carrier blocks for transverse slot shell-type milling arbourAccessories for transverse slot shell-type milling arbour
Carrier blocks for transverse slot shell-type milling arbour
in stock
from 6,84 €
Prices excl. VAT plus shipping costs
(8) Versions
438025 Fitting key for shell-type milling cutter arbour
  • Article no.: 4380250027
  • Catalogue page: KS-1226
Product description
438025 Fitting key for shell-type milling cutter arbourFitting keys
  • For combination shell-type milling cutter arbours

in stock
from 2,88 €
Prices excl. VAT plus shipping costs
(5) Versions
438026 Carrier block with screw for transverse slot shell-type milling arbour
  • Article no.: 4380260016
  • Catalogue page: KS-1221
Product description
438026 Carrier block with screw for transverse slot shell-type milling arbourCarrier blocks
  • For shell-type milling cutter arbours with transverse slots
  • With screw

in stock
from 5,32 €
Prices excl. VAT plus shipping costs
(5) Versions
438035 Extending hooks for UltraJet®
  • Brand: DIEBOLD
  • Article no.: 4380350001
  • Catalogue page: KS-1192
Product description
438035 Extending hooks for UltraJet®Accessories for UltraJet®
Extending hooks
subsequent delivery
from 10,50 €
Prices excl. VAT plus shipping costs
(1) Versions
438230 Hakenschlüssel DIN1810A gefräste Nase
  • Brand: AMF
  • Article no.: 4382300020
  • Catalogue page: KS-1214
Product description
438230 Hakenschlüssel DIN1810A gefräste NaseHook spanner
  • Special steel, hardened and burnished
  • * not DIN-compliant

With milled nose, for DIN 1804 slotted nuts
  • DIN 1810A

in stock
from 6,70 €
Prices excl. VAT plus shipping costs
(16) Versions
438231 Hakenschlüssel DIN1810B, mit Zapfen
  • Brand: AMF
  • Article no.: 4382310020
  • Catalogue page: KS-1214
Product description
438231 Hakenschlüssel DIN1810B, mit ZapfenHook spanner
  • Special steel, hardened and burnished
  • * not DIN-compliant

With pilot tip, for capstan nuts, DIN 1816
  • DIN 1810B

subsequent delivery
from 7,55 €
Prices excl. VAT plus shipping costs
(15) Versions
445010 Clamping wedge for SARAmicro
  • Brand: SARA®
  • Article no.: 4450100120
Product description
445010 Clamping wedge for SARAmicroSpare parts for tool holders
SARAmicro spare parts
in stock
from 9,44 €
Prices excl. VAT plus shipping costs
(3) Versions