Product description
461055 Bar gripper VDI20, clamping range 8 to 90 mmUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Bar gripper with VDI shank, no gripper jawsUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Bar gripper with VDI shank, no gripper jaws
subsequent delivery
from 286,00 €
Prices excl. VAT plus shipping costs
- Article no.: 4610700020
- Catalogue page: KS-1141
Product description
461070 CNC bar gripper with VDI shaftBar gripper- Indexable jaws for several clamping ranges
- Wide clamping range
- Quick and easy setting
- Large range of clamping shanks
DIN 69880 (VDI)Bar gripper- Indexable jaws for several clamping ranges
- Wide clamping range
- Quick and easy setting
- Large range of clamping shanks
DIN 69880 (VDI)
in stock
from 659,00 €
Prices excl. VAT plus shipping costs
- Article no.: 4610720001
- Catalogue page: KS-1141
Product description
461072 Reversible jaw set for CNC bar gripperAccessories for Tschorn bar gripper
Indexable jaw set
Accessories for Tschorn bar gripper
Indexable jaw set
in stock
from 320,00 €
Prices excl. VAT plus shipping costs
Product description
461054 Bar gripper with straight shank, clamping range 8 to 90 mmUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Bar gripper with straight shank, no gripper jawsUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Bar gripper with straight shank, no gripper jaws
subsequent delivery
from 195,00 €
Prices excl. VAT plus shipping costs
Product description
461050 Bar gripper set SET AUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Bar gripper set with straight shank and gripper jawsUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Bar gripper set with straight shank and gripper jaws
subsequent delivery
from 589,00 €
Prices excl. VAT plus shipping costs
Product description
461051 Bar gripper set VDI20 SET AUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Bar gripper set with VDI shank and gripper jawsUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Bar gripper set with VDI shank and gripper jaws
subsequent delivery
from 1.105,00 €
Prices excl. VAT plus shipping costs
Product description
461056 Gripper jawsUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Standard gripper jaw setUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Standard gripper jaw set
subsequent delivery
from 80,00 €
Prices excl. VAT plus shipping costs
Product description
461057 Gripper jaws SGBUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Special gripper jaw setUser video on YouTube or www.sartorius-werkzeuge.deCNC bar grippers- No surface damage to the bar stock to be machined
- Grips bar stock Ø 3 - 90 mm
- Operating method: Rapid traverse, 30 m/min
- Accuracy: ± 0.1 mm (without stop)
- Material projection length: 4 mm is enough for gripping
- Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
- Operating method:
After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
- Requirement:
"Automatically open and close chuck" option
The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
Special gripper jaw set
subsequent delivery
from 160,00 €
Prices excl. VAT plus shipping costs
- Article no.: 4610710020
- Catalogue page: KS-1141
Product description
461071 CNC bar gripper with straight shankBar gripper- Indexable jaws for several clamping ranges
- Wide clamping range
- Quick and easy setting
- Large range of clamping shanks
With straight shankBar gripper- Indexable jaws for several clamping ranges
- Wide clamping range
- Quick and easy setting
- Large range of clamping shanks
With straight shank
in stock
from 775,00 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?