Turning

ISO indexable cutting inserts CBN positive

Product finder

Product finder
PostBackSource:NULL
More filters
390201 CBN indexable cutting insert CCGW ABC 10/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3902011422
Product description
390201 CBN indexable cutting insert CCGW ABC 10/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

CCGW, sharp-edged (A)
External stock
from 17,52 €
Prices excl. VAT plus shipping costs
(5) Versions
390201 CBN indexable cutting insert CCGW ABC 25/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3902011423
Product description
390201 CBN indexable cutting insert CCGW ABC 25/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

CCGW, sharp-edged (A)
subsequent delivery
from 43,80 €
Prices excl. VAT plus shipping costs
(4) Versions
390240 CBN indexable cutting insert CCGW ABC15/F sharp-edged
  • Brand: ATORN®
  • Article no.: 3902403432
Product description
390240 CBN indexable cutting insert CCGW ABC15/F sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

CCGW, sharp-edged (A)
subsequent delivery
from 44,40 €
Prices excl. VAT plus shipping costs
(1) Versions
390205 CBN indexable cutting insert CCGW ABC10/T chamfered
  • Brand: ATORN®
  • Article no.: 3902051422
Product description
390205 CBN indexable cutting insert CCGW ABC10/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

CCGW, chamfered
subsequent delivery
from 43,80 €
Prices excl. VAT plus shipping costs
(5) Versions
390205 CBN indexable cutting insert CCGW ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3902051423
Product description
390205 CBN indexable cutting insert CCGW ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

CCGW, chamfered
External stock
from 43,80 €
Prices excl. VAT plus shipping costs
(5) Versions
390405 CBN indexable cutting insert CNGA ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3904055043
Product description
390405 CBN indexable cutting insert CNGA ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

CNGA, chamfered
in stock
from 17,20 €
Prices excl. VAT plus shipping costs
(2) Versions
391533 CBN indexable cutting insert CNGA X20 D2
  • Brand: ATORN®
  • Article no.: 3915330110
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
391533 CBN indexable cutting insert CNGA X20 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

CNGA negative ABC X15-X20
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391534 CBN indexable cutting insert DNGA X20 D2
  • Brand: ATORN®
  • Article no.: 3915340110
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
391534 CBN indexable cutting insert DNGA X20 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

DNGA negative ABC X15-X20
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391536 CBN indexable cutting insert TNGA X20 D3
  • Brand: ATORN®
  • Article no.: 3915360110
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
391536 CBN indexable cutting insert TNGA X20 D3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

TNGA negative ABC X15-X20
subsequent delivery
from 94,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391538 CBN indexable cutting insert CNGA K10 B2
  • Brand: ATORN®
  • Article no.: 3915380106
  • Catalogue page: KS-0895
  • Cutting values: SW-1086
Product description
391538 CBN indexable cutting insert CNGA K10 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

CNGA negative AB K10-K15
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391539 CBN indexable cutting insert DNGA K10 B2
  • Brand: ATORN®
  • Article no.: 3915390106
  • Catalogue page: KS-0895
  • Cutting values: SW-1086
Product description
391539 CBN indexable cutting insert DNGA K10 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

DNGA negative AB K10-K15
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391542 CBN indexable cutting insert CNGA K15 D2
  • Brand: ATORN®
  • Article no.: 3915420107
  • Catalogue page: KS-0895
  • Cutting values: SW-1086
Product description
391542 CBN indexable cutting insert CNGA K15 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

CNGA negative AB K10-K15
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391543 CBN indexable cutting insert DNGA K15 D2
  • Brand: ATORN®
  • Article no.: 3915430107
  • Catalogue page: KS-0895
  • Cutting values: SW-1086
Product description
391543 CBN indexable cutting insert DNGA K15 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

DNGA negative AB K10-K15
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(2) Versions
391547 CBN indexable cutting insert DNGA S10 C2
  • Brand: ATORN®
  • Article no.: 3915470108
  • Catalogue page: KS-0896
  • Cutting values: SW-1086
Product description
391547 CBN indexable cutting insert DNGA S10 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material type AB S10
  • For machining heat-resistant special alloys, titanium, chrome and nickel alloys

DNGA negative AB S10
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391509 CBN indexable cutting insert TNGA H25 D3
  • Brand: ATORN®
  • Article no.: 3915090102
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391509 CBN indexable cutting insert TNGA H25 D3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
in stock
from 37,80 €
Prices excl. VAT plus shipping costs
(40) Versions
391510 CBN indexable cutting insert TNGA H25 G3
  • Brand: ATORN®
  • Article no.: 3915100103
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391510 CBN indexable cutting insert TNGA H25 G3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
subsequent delivery
from 94,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391500 CBN indexable cutting insert CNGA H25 B2
  • Brand: ATORN®
  • Article no.: 3915000101
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391500 CBN indexable cutting insert CNGA H25 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391519 CBN indexable cutting insert TNGA X15 B3
  • Brand: ATORN®
  • Article no.: 3915190109
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
391519 CBN indexable cutting insert TNGA X15 B3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

TNGA negative ABC X15-X20
subsequent delivery
from 94,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391528 CBN indexable cutting insert TNGA H40 C3
  • Brand: ATORN®
  • Article no.: 3915280104
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391528 CBN indexable cutting insert TNGA H40 C3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
subsequent delivery
from 94,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391529 CBN indexable cutting insert TNGA H40 F3
  • Brand: ATORN®
  • Article no.: 3915290105
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391529 CBN indexable cutting insert TNGA H40 F3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
in stock
from 37,80 €
Prices excl. VAT plus shipping costs
(40) Versions
391546 CBN indexable cutting insert CNGA S10 C2
  • Brand: ATORN®
  • Article no.: 3915460108
  • Catalogue page: KS-0896
  • Cutting values: SW-1086
Product description
391546 CBN indexable cutting insert CNGA S10 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material type AB S10
  • For machining heat-resistant special alloys, titanium, chrome and nickel alloys

CNGA negative AB S10
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391501 CBN indexable cutting insert CNGA H25 D2
  • Brand: ATORN®
  • Article no.: 3915010102
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391501 CBN indexable cutting insert CNGA H25 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
in stock
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391502 CBN indexable cutting insert CNGA H25 G2
  • Brand: ATORN®
  • Article no.: 3915020103
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391502 CBN indexable cutting insert CNGA H25 G2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391516 CBN indexable cutting insert CNGA X15 B2
  • Brand: ATORN®
  • Article no.: 3915160109
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
391516 CBN indexable cutting insert CNGA X15 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

CNGA negative ABC X15-X20
External stock
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391522 CBN indexable cutting insert CNGA H40 C2
  • Brand: ATORN®
  • Article no.: 3915220104
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391522 CBN indexable cutting insert CNGA H40 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391523 CBN indexable cutting insert CNGA H40 F2
  • Brand: ATORN®
  • Article no.: 3915230105
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391523 CBN indexable cutting insert CNGA H40 F2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CNGA negative ABC H25-H40
in stock
from 48,38 €
Prices excl. VAT plus shipping costs
(40) Versions
391503 CBN indexable cutting insert DNGA H25 B2
  • Brand: ATORN®
  • Article no.: 3915030101
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391503 CBN indexable cutting insert DNGA H25 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
in stock
from 25,80 €
Prices excl. VAT plus shipping costs
(40) Versions
391508 CBN indexable cutting insert TNGA H25 B3
  • Brand: ATORN®
  • Article no.: 3915080101
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391508 CBN indexable cutting insert TNGA H25 B3ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

TNGA negative ABC H25-H40
subsequent delivery
from 94,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391504 CBN indexable cutting insert DNGA H25 D2
  • Brand: ATORN®
  • Article no.: 3915040102
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391504 CBN indexable cutting insert DNGA H25 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391505 CBN indexable cutting insert DNGA H25 G2
  • Brand: ATORN®
  • Article no.: 3915050103
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391505 CBN indexable cutting insert DNGA H25 G2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391517 CBN indexable cutting insert DNGA X15 B2
  • Brand: ATORN®
  • Article no.: 3915170109
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
391517 CBN indexable cutting insert DNGA X15 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

DNGA negative ABC X15-X20
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391524 CBN indexable cutting insert DNGA H40 C2
  • Brand: ATORN®
  • Article no.: 3915240104
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391524 CBN indexable cutting insert DNGA H40 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391525 CBN indexable cutting insert DNGA H40 F2
  • Brand: ATORN®
  • Article no.: 3915250105
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
391525 CBN indexable cutting insert DNGA H40 F2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DNGA negative ABC H25-H40
in stock
from 64,50 €
Prices excl. VAT plus shipping costs
(40) Versions
391301 CBN turning insert DCGW 70202 ABC 25/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3913012023
Product description
391301 CBN turning insert DCGW 70202 ABC 25/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DCGW, sharp-edged (A)
in stock
from 44,20 €
Prices excl. VAT plus shipping costs
(4) Versions
391305 CBN turning insert DCGW 70202 ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3913052023
Product description
391305 CBN turning insert DCGW 70202 ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DCGW, chamfered
External stock
from 44,20 €
Prices excl. VAT plus shipping costs
(5) Versions
391301 CBN turning insert DCGW 70202 ABC 10/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3913012022
Product description
391301 CBN turning insert DCGW 70202 ABC 10/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DCGW, sharp-edged (A)
External stock
from 44,20 €
Prices excl. VAT plus shipping costs
(2) Versions
391305 CBN turning insert DCGW 70202 ABC10/T chamfered
  • Brand: ATORN®
  • Article no.: 3913054632
Product description
391305 CBN turning insert DCGW 70202 ABC10/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DCGW, chamfered
External stock
from 44,40 €
Prices excl. VAT plus shipping costs
(1) Versions
390247 CBN turning insert DNGA 150604 ABC15/T chamfered
  • Brand: ATORN®
  • Article no.: 3902475832
Product description
390247 CBN turning insert DNGA 150604 ABC15/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DNGA, chamfered
subsequent delivery
from 45,00 €
Prices excl. VAT plus shipping costs
(1) Versions
391401 CBN turning insert DNGA 150604 ABC 25/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3914015833
Product description
391401 CBN turning insert DNGA 150604 ABC 25/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DNGA, sharp-edged (A)
External stock
from 45,00 €
Prices excl. VAT plus shipping costs
(2) Versions
391405 CBN turning insert DNGA 150604 ABC10/T chamfered
  • Brand: ATORN®
  • Article no.: 3914055832
Product description
391405 CBN turning insert DNGA 150604 ABC10/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DNGA, chamfered
subsequent delivery
from 45,00 €
Prices excl. VAT plus shipping costs
(1) Versions
391405 CBN turning insert DNGA 150604 ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3914055833
Product description
391405 CBN turning insert DNGA 150604 ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

DNGA, chamfered
External stock
from 45,00 €
Prices excl. VAT plus shipping costs
(2) Versions
395501 CBN turning insert TNGA 160404 ABC10/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3955016232
Product description
395501 CBN turning insert TNGA 160404 ABC10/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

TNGA, sharp-edged (A)
External stock
from 44,20 €
Prices excl. VAT plus shipping costs
(1) Versions
395501 CBN turning insert TNGA 160404 ABC25/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3955016233
Product description
395501 CBN turning insert TNGA 160404 ABC25/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

TNGA, sharp-edged (A)
External stock
from 44,20 €
Prices excl. VAT plus shipping costs
(2) Versions
395505 CBN turning insert TNMA 160404-T-ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3955056233
Product description
395505 CBN turning insert TNMA 160404-T-ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

TNGA, chamfered
External stock
from 44,20 €
Prices excl. VAT plus shipping costs
(2) Versions
396810 CBN turning insert VNGA 160404 ABC10/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3968106232
Product description
396810 CBN turning insert VNGA 160404 ABC10/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

VNGA, sharp-edged (A)
External stock
from 60,00 €
Prices excl. VAT plus shipping costs
(1) Versions
396810 CBN turning insert VNGA 160404-A ABC25/A sharp-edged
  • Brand: ATORN®
  • Article no.: 3968106233
Product description
396810 CBN turning insert VNGA 160404-A ABC25/A sharp-edgedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

VNGA, sharp-edged (A)
External stock
from 60,00 €
Prices excl. VAT plus shipping costs
(1) Versions
396815 CBN turning insert VNGA 160404-T ABC10/T chamfered
  • Brand: ATORN®
  • Article no.: 3968156232
Product description
396815 CBN turning insert VNGA 160404-T ABC10/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

VNGA, chamfered
subsequent delivery
from 60,00 €
Prices excl. VAT plus shipping costs
(1) Versions
396815 CBN turning insert VNGA 160404-T ABC25/T chamfered
  • Brand: ATORN®
  • Article no.: 3968156233
Product description
396815 CBN turning insert VNGA 160404-T ABC25/T chamferedPKD and CBN ISO indexable cutting inserts
  • Ultra-hard cutting materials, single tip
  • CBN, cubic boron nitride,quality ABC10 (ISO K01-K25, S01-S15)Polycrystalline CBN type with a high CBN content and carbide base, fine grain, very high wear resistance in the HSC range with GG25 (super-finish), long service life in the case of superalloys
    Material: Grey cast iron (GG25), superalloys.
    Note: For the chamfered version, the type ABC10 includes the protective chamfer "G" as standard
  • CBN, cubic boron nitride, quality ABC15 (ISO K01-K25, S01-S20)Polycrystalline CBN grade with high CBN content and a superfine grain carbide base, very high wear resistance in HSC applications with GGG-40 (super-finish), long service life with superalloys and sintered steel
    Material: Spheroidal graphite cast iron (GGG-40), sintered steels, superalloys
    Note: For the chamfered version, the type ABC15 includes the protective chamfer "C" as standard
  • CBN, cubic boron nitride, quality ABC25 (ISO K05-K20, S05-S25, H01-H25)Polycrystalline CBN type with a low CBN content and carbide base, fine grain, very high wear resistance, pressure resistance and toughness in hard turning (HRC 52-65) in the smooth to medium interrupted vertical section.
    Material: Hard turning, dry, HRC 52 - 65
    Note: For the chamfered version, the type ABC25 includes the protective chamfer "F" as standard
  • PCD, polycrystalline diamond, quality ADC (ISO N05-N40)Polycrystalline diamond with carbide base, fine grain, good cutting edge sharpness and low cutting pressure with narrow tolerances. High degree of wear resistance and toughness.
    Material: Finishing and fine finishing of all non-ferrous metals and non-ferrous materials with a low percentage of abrasive fillers
  • Cutting edge length "m" depends on the cutting radius

VNGA, chamfered
External stock
from 60,00 €
Prices excl. VAT plus shipping costs
(2) Versions
392000 CBN indexable cutting insert CNGA Z2
  • Brand: PALBIT
  • Article no.: 3920000188
  • Catalogue page: KS-0898
  • Cutting values: SW-1086
Product description
392000 CBN indexable cutting insert CNGA Z2CBN ISO indexable cutting inserts
  • ultra-hard cutting material

CNGA Z2
in stock
from 53,60 €
Prices excl. VAT plus shipping costs
(6) Versions
392001 CBN indexable cutting insert CNGA Z4
  • Brand: PALBIT
  • Article no.: 3920010188
  • Catalogue page: KS-0898
  • Cutting values: SW-1086
Product description
392001 CBN indexable cutting insert CNGA Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

CNGA Z4
in stock
from 27,52 €
Prices excl. VAT plus shipping costs
(3) Versions
392002 CBN indexable cutting insert CNGA WG Z4
  • Brand: PALBIT
  • Article no.: 3920020188
Product description
392002 CBN indexable cutting insert CNGA WG Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

CNGA S1513 WG Z4
External stock
from 75,20 €
Prices excl. VAT plus shipping costs
(2) Versions
392003 CBN indexable cutting insert CNGA WG Z4
  • Brand: PALBIT
  • Article no.: 3920030188
Product description
392003 CBN indexable cutting insert CNGA WG Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

CNGA S2513 WG Z4
External stock
from 75,20 €
Prices excl. VAT plus shipping costs
(2) Versions
392004 CBN indexable cutting insert DNGA Z2
  • Brand: PALBIT
  • Article no.: 3920040588
Product description
392004 CBN indexable cutting insert DNGA Z2CBN ISO indexable cutting inserts
  • ultra-hard cutting material

DNGA Z2
External stock
from 52,40 €
Prices excl. VAT plus shipping costs
(8) Versions
392005 CBN indexable cutting insert DNGA Z4
  • Brand: PALBIT
  • Article no.: 3920050188
Product description
392005 CBN indexable cutting insert DNGA Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

DNGA Z4
External stock
from 66,40 €
Prices excl. VAT plus shipping costs
(3) Versions
392006 CBN indexable cutting insert SNGA Z4
  • Brand: PALBIT
  • Article no.: 3920060189
Product description
392006 CBN indexable cutting insert SNGA Z4CBN ISO indexable cutting inserts
  • ultra-hard cutting material

SNGA Z4
External stock
from 82,60 €
Prices excl. VAT plus shipping costs
(1) Versions
392007 CBN indexable cutting insert TNGA Z3
  • Brand: PALBIT
  • Article no.: 3920070188
Product description
392007 CBN indexable cutting insert TNGA Z3CBN ISO indexable cutting inserts
  • ultra-hard cutting material

TNGA Z3
External stock
from 83,60 €
Prices excl. VAT plus shipping costs
(6) Versions
392008 CBN indexable cutting insert TNGA Z6
  • Brand: PALBIT
  • Article no.: 3920080188
Product description
392008 CBN indexable cutting insert TNGA Z6CBN ISO indexable cutting inserts
  • ultra-hard cutting material

TNGA Z6
External stock
from 109,50 €
Prices excl. VAT plus shipping costs
(3) Versions
392009 CBN indexable cutting insert VNGA Z2
  • Brand: PALBIT
  • Article no.: 3920090388
Product description
392009 CBN indexable cutting insert VNGA Z2CBN ISO indexable cutting inserts
  • ultra-hard cutting material

VNGA Z2
External stock
from 53,30 €
Prices excl. VAT plus shipping costs
(6) Versions
392010 CBN indexable cutting insert WNGA Z3
  • Brand: PALBIT
  • Article no.: 3920100388
Product description
392010 CBN indexable cutting insert WNGA Z3CBN ISO indexable cutting inserts
  • ultra-hard cutting material

WNGA Z3
External stock
from 60,50 €
Prices excl. VAT plus shipping costs
(6) Versions
392300 CBN indexable cutting insert CCGW
  • Brand: PALBIT
  • Article no.: 3923000189
Product description
392300 CBN indexable cutting insert CCGWCBN ISO indexable cutting inserts
  • ultra-hard cutting material

CCGW
External stock
from 53,70 €
Prices excl. VAT plus shipping costs
(25) Versions
392301 CBN indexable cutting insert DCGW
  • Brand: PALBIT
  • Article no.: 3923010189
Product description
392301 CBN indexable cutting insert DCGWCBN ISO indexable cutting inserts
  • ultra-hard cutting material

DCGW
subsequent delivery
from 53,70 €
Prices excl. VAT plus shipping costs
(23) Versions
392302 CBN indexable cutting insert TCGW
  • Brand: PALBIT
  • Article no.: 3923020189
Product description
392302 CBN indexable cutting insert TCGWCBN ISO indexable cutting inserts
  • ultra-hard cutting material

TCGW
subsequent delivery
from 72,60 €
Prices excl. VAT plus shipping costs
(3) Versions
392303 CBN indexable cutting insert TPGW
  • Brand: PALBIT
  • Article no.: 3923030888
Product description
392303 CBN indexable cutting insert TPGWCBN ISO indexable cutting inserts
  • ultra-hard cutting material

TPGW
External stock
from 40,30 €
Prices excl. VAT plus shipping costs
(26) Versions
392304 CBN indexable cutting insert VBGW
  • Brand: PALBIT
  • Article no.: 3923040188
Product description
392304 CBN indexable cutting insert VBGWCBN ISO indexable cutting inserts
  • ultra-hard cutting material

VBGW
External stock
from 51,80 €
Prices excl. VAT plus shipping costs
(18) Versions
392305 CBN indexable cutting insert VCGW
  • Brand: PALBIT
  • Article no.: 3923050188
Product description
392305 CBN indexable cutting insert VCGWCBN ISO indexable cutting inserts
  • ultra-hard cutting material

VCGW
External stock
from 53,70 €
Prices excl. VAT plus shipping costs
(4) Versions
390456 CBN indexable cutting insert CCGW K15 D2
  • Brand: ATORN®
  • Article no.: 3904560007
  • Catalogue page: KS-0895
  • Cutting values: SW-1086
Product description
390456 CBN indexable cutting insert CCGW K15 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

CCGW positive AB K10-K15
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(6) Versions
390457 CBN indexable cutting insert DCGW K15 D2
  • Brand: ATORN®
  • Article no.: 3904570007
  • Catalogue page: KS-0895
  • Cutting values: SW-1086
Product description
390457 CBN indexable cutting insert DCGW K15 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

DCGW positive AB K10-K15
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(5) Versions
390461 CBN indexable cutting insert CCGW S10 C2
  • Brand: ATORN®
  • Article no.: 3904610008
  • Catalogue page: KS-0896
  • Cutting values: SW-1086
Product description
390461 CBN indexable cutting insert CCGW S10 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material type AB S10
  • For machining heat-resistant special alloys, titanium, chrome and nickel alloys

for machining e.g. special alloys

CCGW positive AB S10
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(6) Versions
390462 CBN indexable cutting insert DCGW S10 C2
  • Brand: ATORN®
  • Article no.: 3904620008
  • Catalogue page: KS-0896
  • Cutting values: SW-1086
Product description
390462 CBN indexable cutting insert DCGW S10 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material type AB S10
  • For machining heat-resistant special alloys, titanium, chrome and nickel alloys

DCGW positive AB S10
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(4) Versions
390500 CBN indexable cutting insert CCGW H25 B2
  • Brand: ATORN®
  • Article no.: 3905000501
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390500 CBN indexable cutting insert CCGW H25 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CCGW positive ABC H25-H40
for machining e.g. hardened steel

in stock
from 25,80 €
Prices excl. VAT plus shipping costs
(6) Versions
390501 CBN indexable cutting insert CCGW H25 D2
  • Brand: ATORN®
  • Article no.: 3905010502
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390501 CBN indexable cutting insert CCGW H25 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CCGW positive ABC H25-H40
in stock
from 25,80 €
Prices excl. VAT plus shipping costs
(6) Versions
390502 CBN indexable cutting insert CCGW H25 G2
  • Brand: ATORN®
  • Article no.: 3905020003
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390502 CBN indexable cutting insert CCGW H25 G2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CCGW positive ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(6) Versions
390503 CBN indexable cutting insert DCGW H25 B2
  • Brand: ATORN®
  • Article no.: 3905030001
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390503 CBN indexable cutting insert DCGW H25 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DCGW positive ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(5) Versions
390504 CBN indexable cutting insert DCGW H25 D2
  • Brand: ATORN®
  • Article no.: 3905040002
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390504 CBN indexable cutting insert DCGW H25 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DCGW positive ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(65) Versions
390505 CBN indexable cutting insert DCGW H25 G2
  • Brand: ATORN®
  • Article no.: 3905050503
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390505 CBN indexable cutting insert DCGW H25 G2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DCGW positive ABC H25-H40
in stock
from 25,80 €
Prices excl. VAT plus shipping costs
(65) Versions
390518 CBN indexable cutting insert DCGW X15 B2
  • Brand: ATORN®
  • Article no.: 3905180009
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
390518 CBN indexable cutting insert DCGW X15 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

DCGW positive ABC X15-X20
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(65) Versions
390525 CBN indexable cutting insert DCGW H40 C2
  • Brand: ATORN®
  • Article no.: 3905250004
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390525 CBN indexable cutting insert DCGW H40 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DCGW positive ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(65) Versions
390526 CBN indexable cutting insert DCGW H40 F2
  • Brand: ATORN®
  • Article no.: 3905260005
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390526 CBN indexable cutting insert DCGW H40 F2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

DCGW positive ABC H25-H40
in stock
from 25,80 €
Prices excl. VAT plus shipping costs
(65) Versions
390536 CBN indexable cutting insert DCGW X20 D2
  • Brand: ATORN®
  • Article no.: 3905360010
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
390536 CBN indexable cutting insert DCGW X20 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

DCGW positive ABC X15-X20
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(65) Versions
390542 CBN indexable cutting insert DCGW K10 B2
  • Brand: ATORN®
  • Article no.: 3905420406
  • Catalogue page: KS-0895
  • Cutting values: SW-1086
Product description
390542 CBN indexable cutting insert DCGW K10 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

DCGW positive AB K10-K15
in stock
from 25,80 €
Prices excl. VAT plus shipping costs
(65) Versions
390517 CBN indexable cutting insert CCGW X15 B2
  • Brand: ATORN®
  • Article no.: 3905170009
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
390517 CBN indexable cutting insert CCGW X15 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

for machining e.g. hardened tool steel

CCGW positive ABC X15-X20
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(65) Versions
390523 CBN indexable cutting insert CCGW H40 C2
  • Brand: ATORN®
  • Article no.: 3905230004
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390523 CBN indexable cutting insert CCGW H40 C2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CCGW positive ABC H25-H40
subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(65) Versions
390524 CBN indexable cutting insert CCGW H40 F2
  • Brand: ATORN®
  • Article no.: 3905240505
  • Catalogue page: KS-0893
  • Cutting values: SW-1086
Product description
390524 CBN indexable cutting insert CCGW H40 F2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC H25 and ABC H40
  • For machining hardened steels, sintered steel, chilled cast iron up to 68 HRC

CCGW positive ABC H25-H40
in stock
from 25,80 €
Prices excl. VAT plus shipping costs
(65) Versions
390535 CBN indexable cutting insert CCGW X20 D2
  • Brand: ATORN®
  • Article no.: 3905350010
  • Catalogue page: KS-0894
  • Cutting values: SW-1086
Product description
390535 CBN indexable cutting insert CCGW X20 D2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types ABC X15 and ABC X20
  • For machining hardened steels, PM steel, stellite and stainless steel up to 70 HRC

for machining e.g. hardened tool steel

CCGW positive ABC X15-X20
External stock
from 64,50 €
Prices excl. VAT plus shipping costs
(65) Versions
390541 CBN indexable cutting insert CCGW K10 B2
  • Brand: ATORN®
  • Article no.: 3905410006
  • Catalogue page: KS-0895
  • Cutting values: SW-1086
Product description
390541 CBN indexable cutting insert CCGW K10 B2ISO indexable cutting inserts CBN
  • Ultra-hard cutting material
  • Cutting material types AB K10 and AB K15
  • For machining cast iron (GG, GGG)

CCGW positive AB K10-K15
for machining cast iron

subsequent delivery
from 64,50 €
Prices excl. VAT plus shipping costs
(65) Versions