Milling

GFRP and CFRP cutters

Product finder

Product finder
PostBackSource:NULL
More filters
N
250050 Contour milling cutter solid carbide GRP/CRP type A
  • Brand: SARA®
  • Article no.: 2500500002
  • Catalogue page: KS-0499
  • Cutting values: SW-0771
Product description
250050 Contour milling cutter solid carbide GRP/CRP type AContour cutter for GFRP and CFRP
  • Various versions
  • Type A - smooth front face
  • Type B - rotary cutter front face
  • Type C - end mill front face
  • Type D - drill point

in stock
from 5,00 €
Prices excl. VAT plus shipping costs
(11) Versions
N
250051 Contour milling cutter solid carbide GRP/CRP type B
  • Brand: SARA®
  • Article no.: 2500510003
  • Catalogue page: KS-0499
  • Cutting values: SW-0771
Product description
250051 Contour milling cutter solid carbide GRP/CRP type BContour cutter for GFRP and CFRP
  • Various versions
  • Type A - smooth front face
  • Type B - rotary cutter front face
  • Type C - end mill front face
  • Type D - drill point

in stock
from 13,25 €
Prices excl. VAT plus shipping costs
(11) Versions
N
250052 Contour milling cutter solid carbide GRP/CRP type C
  • Brand: SARA®
  • Article no.: 2500520002
  • Catalogue page: KS-0499
  • Cutting values: SW-0771
Product description
250052 Contour milling cutter solid carbide GRP/CRP type CContour cutter for GFRP and CFRP
  • Various versions
  • Type A - smooth front face
  • Type B - rotary cutter front face
  • Type C - end mill front face
  • Type D - drill point

in stock
from 6,02 €
Prices excl. VAT plus shipping costs
(11) Versions
N
250053 Contour milling cutter solid carbide GRP/CRP type D
  • Brand: SARA®
  • Article no.: 2500530001
  • Catalogue page: KS-0499
  • Cutting values: SW-0771
Product description
250053 Contour milling cutter solid carbide GRP/CRP type DContour cutter for GFRP and CFRP
  • Various versions
  • Type A - smooth front face
  • Type B - rotary cutter front face
  • Type C - end mill front face
  • Type D - drill point

in stock
from 5,90 €
Prices excl. VAT plus shipping costs
(11) Versions
N
250600 Compression cutter W-A
  • Brand: ATORN®
  • Article no.: 2506000060
Product description
250600 Compression cutter W-AAdditional versions available from the manufacturer

Compression milling cutter
  • For fibre plastics
  • Counter-rotating chip flutes with chip breakers
  • Spiralisation change from left to right
  • Axial cutting forces converge in the centre
  • Finishing quality (ra < 2 μm)
  • Simultaneously pulling and pushing cut
  • Surface Dia-HC-coated

Short
in stock
from 119,50 €
Prices excl. VAT plus shipping costs
(4) Versions
N
250601 Compression cutter W-B
  • Brand: ATORN®
  • Article no.: 2506010060
Product description
250601 Compression cutter W-BAdditional versions available from the manufacturer

Compression milling cutter
  • For fibre plastics
  • Counter-rotating chip flutes with chip breakers
  • Spiralisation change from left to right
  • Axial cutting forces converge in the centre
  • Finishing quality (ra < 2 μm)
  • Simultaneously pulling and pushing cut
  • Surface Dia-HC-coated

Medium
in stock
from 119,50 €
Prices excl. VAT plus shipping costs
(4) Versions
N
250602 Compression cutter W-C
  • Brand: ATORN®
  • Article no.: 2506020060
Product description
250602 Compression cutter W-CAdditional versions available from the manufacturer

Compression milling cutter
  • For fibre plastics
  • Counter-rotating chip flutes with chip breakers
  • Spiralisation change from left to right
  • Axial cutting forces converge in the centre
  • Finishing quality (ra < 2 μm)
  • Simultaneously pulling and pushing cut
  • Surface Dia-HC-coated

Long
in stock
from 132,50 €
Prices excl. VAT plus shipping costs
(3) Versions
N
250603 End milling cutter for GRP / CFRP W 0°
  • Brand: ATORN®
  • Article no.: 2506030050
Product description
250603 End milling cutter for GRP / CFRP W 0°Additional versions available from the manufacturer

HSC milling cutter Z5
  • For fibre composite materials
  • Large chip flutes with synchronous chip-breakers
  • Continuous cut, good chip removal
  • Straight grooves, no tensile forces on the workpiece
  • Dia-HC-coated

in stock
from 58,70 €
Prices excl. VAT plus shipping costs
(6) Versions
N
250604 End milling cutter for GRP / CFRP W 10°
  • Brand: ATORN®
  • Article no.: 2506040050
Product description
250604 End milling cutter for GRP / CFRP W 10°Additional versions available from the manufacturer

HSC milling cutter Z6
  • Fibre composite materials
  • Large chip flutes with synchronous chip-breakers
  • Continuous cut, good chip removal
  • Dia-HC-coated

in stock
from 58,70 €
Prices excl. VAT plus shipping costs
(8) Versions
N
250605 Multi tooth cutter face gear fine
  • Brand: ATORN®
  • Article no.: 2506050040
Product description
250605 Multi tooth cutter face gear fineAdditional versions available from the manufacturer

Milling cutters with pyramid-shaped toothing
  • Pyramid-shaped bevel toothing, draw cutting
  • Multi-tooth milling cutter front for grooving and face milling
  • Extremely sharp cutting edges
  • Fine: Fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: Sandwich materials and foams
  • Polished surface

in stock
from 23,60 €
Prices excl. VAT plus shipping costs
(6) Versions
N
250606 Multi tooth cutter face gear medium
  • Brand: ATORN®
  • Article no.: 2506060040
Product description
250606 Multi tooth cutter face gear mediumAdditional versions available from the manufacturer

Milling cutters with pyramid-shaped toothing
  • Pyramid-shaped bevel toothing, draw cutting
  • Multi-tooth milling cutter front for grooving and face milling
  • Extremely sharp cutting edges
  • Fine: Fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: Sandwich materials and foams
  • Polished surface

subsequent delivery
from 23,60 €
Prices excl. VAT plus shipping costs
(6) Versions
N
250607 Multi tooth cutter face gear coarse
  • Brand: ATORN®
  • Article no.: 2506070040
Product description
250607 Multi tooth cutter face gear coarseAdditional versions available from the manufacturer

Milling cutters with pyramid-shaped toothing
  • Pyramid-shaped bevel toothing, draw cutting
  • Multi-tooth milling cutter front for grooving and face milling
  • Extremely sharp cutting edges
  • Fine: Fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: Sandwich materials and foams
  • Polished surface

subsequent delivery
from 23,60 €
Prices excl. VAT plus shipping costs
(6) Versions
N
250608 Groove milling cutter with groove milling head fine WX
  • Brand: ATORN®
  • Article no.: 2506080040
Product description
250608 Groove milling cutter with groove milling head fine WXAdditional versions available from the manufacturer

Milling cutters with groove milling head
  • Pyramid-shaped bevel toothing, draw cutting
  • Groove milling cutter bit for drilling, grooving, edge banding
  • Extremely sharp cutting edges
  • Fine: fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: sandwich materials and foams
  • Polished and/or Dia-HC-coated

Uncoated
in stock
from 25,20 €
Prices excl. VAT plus shipping costs
(8) Versions
N
250609 Groove milling cutter with groove milling head fine Dia.HC
  • Brand: ATORN®
  • Article no.: 2506090040
Product description
250609 Groove milling cutter with groove milling head fine Dia.HCAdditional versions available from the manufacturer

Milling cutters with groove milling head
  • Pyramid-shaped bevel toothing, draw cutting
  • Groove milling cutter bit for drilling, grooving, edge banding
  • Extremely sharp cutting edges
  • Fine: fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: sandwich materials and foams
  • Polished and/or Dia-HC-coated

Dia-HC-coated
in stock
from 36,80 €
Prices excl. VAT plus shipping costs
(8) Versions
N
250610 Groove milling cutter with groove milling head medium
  • Brand: ATORN®
  • Article no.: 2506100040
Product description
250610 Groove milling cutter with groove milling head mediumAdditional versions available from the manufacturer

Milling cutters with groove milling head
  • Pyramid-shaped bevel toothing, draw cutting
  • Groove milling cutter bit for drilling, grooving, edge banding
  • Extremely sharp cutting edges
  • Fine: fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: sandwich materials and foams
  • Polished and/or Dia-HC-coated

Uncoated
in stock
from 25,20 €
Prices excl. VAT plus shipping costs
(8) Versions
N
250611 Groove milling cutter with groove milling head medium Dia.HC
  • Brand: ATORN®
  • Article no.: 2506110040
Product description
250611 Groove milling cutter with groove milling head medium Dia.HCAdditional versions available from the manufacturer

Milling cutters with groove milling head
  • Pyramid-shaped bevel toothing, draw cutting
  • Groove milling cutter bit for drilling, grooving, edge banding
  • Extremely sharp cutting edges
  • Fine: fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: sandwich materials and foams
  • Polished and/or Dia-HC-coated

Dia-HC-coated
in stock
from 36,80 €
Prices excl. VAT plus shipping costs
(8) Versions
N
250612 Groove milling cutter with groove milling head coarse
  • Brand: ATORN®
  • Article no.: 2506120040
Product description
250612 Groove milling cutter with groove milling head coarseAdditional versions available from the manufacturer

Milling cutters with groove milling head
  • Pyramid-shaped bevel toothing, draw cutting
  • Groove milling cutter bit for drilling, grooving, edge banding
  • Extremely sharp cutting edges
  • Fine: fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: sandwich materials and foams
  • Polished and/or Dia-HC-coated

Uncoated
in stock
from 25,20 €
Prices excl. VAT plus shipping costs
(8) Versions
N
250613 Groove milling cutter with groove milling head coarse Dia.HC
  • Brand: ATORN®
  • Article no.: 2506130040
Product description
250613 Groove milling cutter with groove milling head coarse Dia.HCAdditional versions available from the manufacturer

Milling cutters with groove milling head
  • Pyramid-shaped bevel toothing, draw cutting
  • Groove milling cutter bit for drilling, grooving, edge banding
  • Extremely sharp cutting edges
  • Fine: fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: sandwich materials and foams
  • Polished and/or Dia-HC-coated

Dia-HC-coated
subsequent delivery
from 36,80 €
Prices excl. VAT plus shipping costs
(8) Versions
N
250614 Face milling cutter with face radius medium
  • Brand: ATORN®
  • Article no.: 2506140040
  • Catalogue page: KS-0499
  • Cutting values: SW-0771
Product description
250614 Face milling cutter with face radius mediumAdditional versions available from the manufacturer

Face milling cutter with face radius
  • Pyramid-shaped bevel toothing, draw cutting
  • Face radius for copy milling
  • Extremely sharp cutting edges
  • Medium: soft fibre plastics with an adhesive tendency
  • Dia-HC-coated

subsequent delivery
from 38,60 €
Prices excl. VAT plus shipping costs
(6) Versions
N
250615 Drill cutter with drill point fine
  • Brand: ATORN®
  • Article no.: 2506150040
Product description
250615 Drill cutter with drill point fineAdditional versions available from the manufacturer

Drilling cutter with drill bit
  • Pyramid-shaped bevel toothing, draw cutting
  • Drill bit 135° for drilling and edge banding
  • Extremely sharp cutting edges
  • Fine: Fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: Sandwich materials and foams
  • Polished surface

in stock
from 26,80 €
Prices excl. VAT plus shipping costs
(6) Versions
N
250616 Drill cutter with drill point medium
  • Brand: ATORN®
  • Article no.: 2506160040
Product description
250616 Drill cutter with drill point mediumAdditional versions available from the manufacturer

Drilling cutter with drill bit
  • Pyramid-shaped bevel toothing, draw cutting
  • Drill bit 135° for drilling and edge banding
  • Extremely sharp cutting edges
  • Fine: Fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: Sandwich materials and foams
  • Polished surface

in stock
from 26,80 €
Prices excl. VAT plus shipping costs
(6) Versions
N
250617 Drill cutter with coarse drill point
  • Brand: ATORN®
  • Article no.: 2506170040
Product description
250617 Drill cutter with coarse drill pointAdditional versions available from the manufacturer

Drilling cutter with drill bit
  • Pyramid-shaped bevel toothing, draw cutting
  • Drill bit 135° for drilling and edge banding
  • Extremely sharp cutting edges
  • Fine: Fibre plastics with a high fibre content
  • Medium: soft fibre plastics with an adhesive tendency
  • Coarse: Sandwich materials and foams
  • Polished surface

in stock
from 26,80 €
Prices excl. VAT plus shipping costs
(6) Versions
N
250618 Milling cutter for Aramid fibrous materials
  • Brand: ATORN®
  • Article no.: 2506180060
Product description
250618 Milling cutter for Aramid fibrous materialsAdditional versions available from the manufacturer

Milling cutters for Aramid fibrous materials
  • For fibrous materials (aramid, Kevlar®)
  • Counter-rotating toothing
  • Right-hand cutting with right-hand/left-hand twist
  • Extremely sharp cutting edges
  • No delamination with textile structures
  • Polished surface

subsequent delivery
from 106,00 €
Prices excl. VAT plus shipping costs
(4) Versions
N
250619 Milling cutter for honeycomb composite materials
  • Brand: ATORN®
  • Article no.: 2506190060
Product description
250619 Milling cutter for honeycomb composite materialsAdditional versions available from the manufacturer

Milling cutters for honeycomb composite materials
  • For honeycomb composite materials
  • Special toothing with drawing cut
  • Good surface for further finishing
  • Extremely sharp cutting edges
  • Multi-flute spur toothing
  • From Ø 16 mm with HSS shank

in stock
from 50,70 €
Prices excl. VAT plus shipping costs
(6) Versions