- Brand: D´ANDREA
- Article no.: 3720010002
- Catalogue page: KS-0343
Product description
372001 MHD base support DIN69871A SK30 MHD'50.60MHD base holding fixtures- Case-hardened steel, hardened and ground to tolerance AT3.
- ISO 40 taper recommended exclusively for sizes MHD-50 and MHD-63
- For heavy milling work and bores with a depth of more than 250 mm and greater than 125 mm in Ø, an MHD-80 base holding fixture should be used.
- Base holding fixtures in special designs or with planar support are available on request.
DIN 69871 AD, ISO 7388/1
from 165,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3720170002
- Catalogue page: KS-0343
Product description
372017 MHD base support DIN69893 HSK-A50 MHD'50.66MHD base holding fixtures- Case-hardened steel, hardened and ground to tolerance AT3.
- ISO 40 taper recommended exclusively for sizes MHD-50 and MHD-63
- For heavy milling work and bores with a depth of more than 250 mm and greater than 125 mm in Ø, an MHD-80 base holding fixture should be used.
- Base holding fixtures in special designs or with planar support are available on request.
DIN 69893-A, HSK
from 230,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728250025
- Catalogue page: KS-0348
Product description
372825 MHD insert holder SFTPMHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1µm can easily be read off the Vernier scale and executed directly on the machine.
SFTP insert holder- For TRM high-precision boring head
MHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1μm can easily be read off the Vernier scale and executed directly on the machine.
SFTP insert holder- For TRM high-precision boring head
from 81,40 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728372030
- Catalogue page: KS-0349
- Cutting values: SW-0416
Product description
372837 MHD basic holder P20.30MHD base holder
P 20.30 base holder
from 87,70 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3732050001
- Catalogue page: KS-0352
- Cutting values: SW-0417
Product description
373205 D'ANDREA screwISO indexable cutting insertsIndexable inserts for reaming and line boring- DP 300 uncoated,
roughing and finishing, low-carbon steel, stainless steel - DK 100 uncoated,
roughing and finishing, aluminium alloys, cast iron - DC 100 uncoated,
finishing, alloyed steel, cast iron - DC 100T coated,
finishing, alloyed steel, stainless steel, cast iron - D25 CBN cubic boron nitride (one corner tipped),
finishing, steel with a hardness over 50 HRC and for interrupted cutting - D20 MDC diamond,
finishing, aluminium alloys, non-ferrous metals - DP 100R coated,
roughing, low-carbon steel, stainless steel
Clamping screws
from 4,20 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3722032016
- Catalogue page: KS-0344
Product description
372203 MHD reduction RDMHD reducers RD- Reducers permit the use of elements for smaller MHD sizes.
- This makes the MHD system even more flexible.
- Greater rigidity is achieved by using smaller MHD tools in larger holding fixtures.
from 120,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728353124
- Catalogue page: KS-0349
- Cutting values: SW-0416
Product description
372835 MHD basic holder PSMHD base holderPS base holder- For TRM high-precision boring heads (insert holder SF.. 50)
from 99,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3726100016
- Catalogue page: KS-0346
Product description
372610 MHD insert holder SSCCMHD insert holder SSCC / SMCC / SSSC- For twin-cutter boring bars
- Type SSTC insert holders available on request
SSCC
from 74,30 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3726120025
- Catalogue page: KS-0346
Product description
372612 MHD insert holder SMCCMHD insert holder SSCC / SMCC / SSSC- For twin-cutter boring bars
- Type SSTC insert holders available on request
SMCC
from 81,50 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728152563
- Catalogue page: KS-0347
Product description
372815 MHD base holder P 25.105MHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1µm can easily be read off the Vernier scale and executed directly on the machine.
P 25.63 base holderMHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1μm can easily be read off the Vernier scale and executed directly on the machine.
P 25.63 base holder
from 80,30 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3706200008
- Catalogue page: KS-0348
Product description
370620 Reducing bush D04.16, A-Ø16 mm/I-Ø4 mm, for TRM50/50 TRM50HS T100/TA120MHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1µm can easily be read off the Vernier scale and executed directly on the machine.
Reducing bushes, straight- For TRM 50/50 and TRM 50HS high-precision boring heads
MHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1μm can easily be read off the Vernier scale and executed directly on the machine.
Reducing bushes, straight- For TRM 50/50 and TRM 50HS high-precision boring heads
from 76,30 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3720030001
Product description
372003 MHD base support DIN69871ADBMHD base holding fixtures- Case-hardened steel, hardened and ground to tolerance AT3.
- ISO 40 taper recommended exclusively for sizes MHD-50 and MHD-63
- For heavy milling work and bores with a depth of more than 250 mm and greater than 125 mm in Ø, an MHD-80 base holding fixture should be used.
- Base holding fixtures in special designs or with planar support are available on request.
DIN 69871-B
from 198,50 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3720050004
- Catalogue page: KS-0343
Product description
372005 MHD base support MAS403 BTMHD base holding fixtures- Case-hardened steel, hardened and ground to tolerance AT3.
- ISO 40 taper recommended exclusively for sizes MHD-50 and MHD-63
- For heavy milling work and bores with a depth of more than 250 mm and greater than 125 mm in Ø, an MHD-80 base holding fixture should be used.
- Base holding fixtures in special designs or with planar support are available on request.
MAS 403 BT
from 75,20 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3720090007
- Catalogue page: KS-0343
Product description
372009 MHD base support DIN2080A MHD'50.58MHD base holding fixtures- Case-hardened steel, hardened and ground to tolerance AT3.
- ISO 40 taper recommended exclusively for sizes MHD-50 and MHD-63
- For heavy milling work and bores with a depth of more than 250 mm and greater than 125 mm in Ø, an MHD-80 base holding fixture should be used.
- Base holding fixtures in special designs or with planar support are available on request.
DIN 2080-A, „OTT“
from 88,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3720101611
- Catalogue page: KS-0344
Product description
372010 MHD boring bar solid carbide for deep hole machining BMDLine boring up to 10xDBMD solid carbide MHD base holding fixture, straight- Due to the use of solid carbide MHD base holding fixtures, different machining depths can be achieved.
- Straight shank for use in hydraulic expansion chucks or power chucks
from 529,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3722011625
- Catalogue page: KS-0344
Product description
372201 MHD extension PRMHD extensions PR- The use of MHD extensions allows different machining depths to be achieved; various extensions are available for any MHD size.
from 124,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3722045016
- Catalogue page: KS-0345
Product description
372204 MHD reduction RAVMHD reducers RAV
from 280,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3726140032
- Catalogue page: KS-0346
Product description
372614 MHD insert holder SSSCMHD insert holder SSCC / SMCC / SSSC- For twin-cutter boring bars
- Type SSTC insert holders available on request
SSSC
from 84,50 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728070008
- Catalogue page: KS-0347
Product description
372807 MHD boring barMHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1µm can easily be read off the Vernier scale and executed directly on the machine.
Boring bar- For TRM 50/50 and TRM 50HS high-precision boring heads
MHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1μm can easily be read off the Vernier scale and executed directly on the machine.
Boring bar- For TRM 50/50 and TRM 50HS high-precision boring heads
from 35,56 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728080006
- Catalogue page: KS-0347
Product description
372808 MHD boring bar low vibrationMHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1µm can easily be read off the Vernier scale and executed directly on the machine.
Low-vibration boring bar- For TRM 50/50 and TRM 50HS high-precision boring heads
MHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1μm can easily be read off the Vernier scale and executed directly on the machine.
Low-vibration boring bar- For TRM 50/50 and TRM 50HS high-precision boring heads
from 240,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728090006
- Catalogue page: KS-0347
Product description
372809 MHD boring bar solid carbideMHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1µm can easily be read off the Vernier scale and executed directly on the machine.
Solid carbide boring bar (approx. 8xD)- For TRM 50/50 and TRM 50HS high-precision boring heads
MHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1μm can easily be read off the Vernier scale and executed directly on the machine.
Solid carbide boring bar (approx. 8xD)- For TRM 50/50 and TRM 50HS high-precision boring heads
from 433,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728200440
- Catalogue page: KS-0349
- Cutting values: SW-0416
Product description
372820 MHD basic holder PMHD base holder
P.. base holder
from 80,00 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728270016
- Catalogue page: KS-0348
Product description
372827 MHD insert holder SFCCMHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1µm can easily be read off the Vernier scale and executed directly on the machine.
SFCC insert holder- For TRM high-precision boring head
MHD micrometric boring bar system- TRM boring heads and micrometric boring bars ensure a tolerance of IT6 with an optimum surface finish quality.
- Settings with a radial correction of 1μm can easily be read off the Vernier scale and executed directly on the machine.
SFCC insert holder- For TRM high-precision boring head
from 74,30 €
Prices excl. VAT plus shipping costs
- Brand: D´ANDREA
- Article no.: 3728360032
- Catalogue page: KS-0349
- Cutting values: SW-0416
Product description
372836 MHD counterweight CWMHD base holder
CW 32 counterweight
from 41,70 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?