- Brand: SARA®
- Article no.: 1293000001
- Catalogue page: KS-0220
- Cutting values: SW-0401
Product description
129300 Indexable cutting insert SARACut XPNT SP300 P, M, SSARAcut 2.0 drilling and turning tool- Drilling and turning with one tool
- Multifunctional:
Solid drilling with a level-bottomed drill hole (Drawing 1)
Turning internal contours (Drawing 2)
Turning of flat contours (Drawing 3)
Turning external contours (Drawing 4)
(Note change of rotational direction) - Reduced storage of tools and indexable inserts, as well as reduced tooling times
- Reduction of tool costs
- Reduced programming effort and expense
- Solves the problem of tool location shortages
XPNT indexable inserts- XPNT 0402: right holder = right indexable insert ER, left holder = left indexable insert EL
SARAcut 2.0 drilling and turning tool- Drilling and turning with one tool
- Multifunctional:
solid drilling with a level-bottomed drill (drawing 1)
Turning internal contours (drawing 2)
Turning flat contours (drawing 3)
Turning external contours (drawing 4)
(note change of rotational direction) - Reduced storage of tools and indexable inserts, as well as reduced tooling times
- Reduction of tool costs
- Reduced programming effort and expense
- Solves the problem of tool location shortages
- 3 geometries for a wide range of applications:
129300.... SP300, for steel materials, stainless steel and special alloys (ISO P, M, S)
129350.... SP350, for steel and cast materials (ISO P, K)
129400.... SW200, for non-ferrous materials (ISO N)
XPNT indexable inserts- XPNT 0402: right holder = right indexable insert ER, left holder = left indexable insert EL
from 13,20 €
Prices excl. VAT plus shipping costs
- Brand: SARA®
- Article no.: 1294000001
- Catalogue page: KS-0220
- Cutting values: SW-0401
Product description
129400 Indexable cutting insert SARACut XPET SW200, NESARAcut 2.0 drilling and turning tool- Drilling and turning with one tool
- Multifunctional:
Solid drilling with a level-bottomed drill hole (Drawing 1)
Turning internal contours (Drawing 2)
Turning of flat contours (Drawing 3)
Turning external contours (Drawing 4)
(Note change of rotational direction) - Reduced storage of tools and indexable inserts, as well as reduced tooling times
- Reduction of tool costs
- Reduced programming effort and expense
- Solves the problem of tool location shortages
Indexable inserts XPETSARAcut 2.0 drilling and turning tool- Drilling and turning with one tool
- Multifunctional:
solid drilling with a level-bottomed drill (drawing 1)
Turning internal contours (drawing 2)
Turning flat contours (drawing 3)
Turning external contours (drawing 4)
(note change of rotational direction) - Reduced storage of tools and indexable inserts, as well as reduced tooling times
- Reduction of tool costs
- Reduced programming effort and expense
- Solves the problem of tool location shortages
- 3 geometries for a wide range of applications:
129300.... SP300, for steel materials, stainless steel and special alloys (ISO P, M, S)
129350.... SP350, for steel and cast materials (ISO P, K)
129400.... SW200, for non-ferrous materials (ISO N)
Indexable inserts XPET
from 19,10 €
Prices excl. VAT plus shipping costs
- Brand: SARA®
- Article no.: 1293500007
- Catalogue page: KS-0220
- Cutting values: SW-0401
Product description
129350 Indexable cutting insert SARACut XPNT SP350 P, KSARAcut 2.0 drilling and turning tool- Drilling and turning with one tool
- Multifunctional:
Solid drilling with a level-bottomed drill hole (Drawing 1)
Turning internal contours (Drawing 2)
Turning of flat contours (Drawing 3)
Turning external contours (Drawing 4)
(Note change of rotational direction) - Reduced storage of tools and indexable inserts, as well as reduced tooling times
- Reduction of tool costs
- Reduced programming effort and expense
- Solves the problem of tool location shortages
XPNT indexable inserts- XPNT 0402: right holder = right indexable insert ER, left holder = left indexable insert EL
SARAcut 2.0 drilling and turning tool- Drilling and turning with one tool
- Multifunctional:
solid drilling with a level-bottomed drill (drawing 1)
Turning internal contours (drawing 2)
Turning flat contours (drawing 3)
Turning external contours (drawing 4)
(note change of rotational direction) - Reduced storage of tools and indexable inserts, as well as reduced tooling times
- Reduction of tool costs
- Reduced programming effort and expense
- Solves the problem of tool location shortages
- 3 geometries for a wide range of applications:
129300.... SP300, for steel materials, stainless steel and special alloys (ISO P, M, S)
129350.... SP350, for steel and cast materials (ISO P, K)
129400.... SW200, for non-ferrous materials (ISO N)
XPNT indexable inserts- XPNT 0402: right holder = right indexable insert ER, left holder = left indexable insert EL
from 5,96 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 1296150402
Product description
129615 Indexable cutting insert WCHX HW7310 (N, K)Indexable cutting inserts WCHX- Solid carbide indexable cutting inserts WCHX for facing and longitudinal turning, drilling, countersinking and chamfering
- HW7310 uncoated
innovative cutting edge geometry with extremely sharp cutting edges for reliable machining of non-ferrous metals
very hard substrate for long service lives
very good chip breaking thanks to chip breaker - HC7625 coated (TiN)
universal and reliable use in steel and stainless steel
excellent combination of wear resistance and toughness - HC7535 coated (TiAlN)
universal and reliable use in steel and stainless steel with increased impact loads
optimised for machining in unfavourable cutting conditions
Indexable cutting inserts WCHX- Solid carbide indexable cutting inserts WCHX for facing and longitudinal turning, drilling, countersinking and chamfering
- HW7310 uncoated
innovative cutting edge geometry with extremely sharp cutting edges for reliable machining of non-ferrous metals
very hard substrate for long service lives
very good chip breaking thanks to chip breaker - HC7625 coated (TiN)
universal and reliable use in steel and stainless steel
excellent combination of wear resistance and toughness - HC7535 coated (TiAlN)
universal and reliable use in steel and stainless steel with increased impact loads
optimised for machining in unfavourable cutting conditions
from 20,90 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 1296300402
Product description
129630 Indexable cutting insert WCHX HC7535 (P, M)Indexable cutting inserts WCHX- Solid carbide indexable cutting inserts WCHX for facing and longitudinal turning, drilling, countersinking and chamfering
- HW7310 uncoated
innovative cutting edge geometry with extremely sharp cutting edges for reliable machining of non-ferrous metals
very hard substrate for long service lives
very good chip breaking thanks to chip breaker - HC7625 coated (TiN)
universal and reliable use in steel and stainless steel
excellent combination of wear resistance and toughness - HC7535 coated (TiAlN)
universal and reliable use in steel and stainless steel with increased impact loads
optimised for machining in unfavourable cutting conditions
Indexable cutting inserts WCHX- Solid carbide indexable cutting inserts WCHX for facing and longitudinal turning, drilling, countersinking and chamfering
- HW7310 uncoated
innovative cutting edge geometry with extremely sharp cutting edges for reliable machining of non-ferrous metals
very hard substrate for long service lives
very good chip breaking thanks to chip breaker - HC7625 coated (TiN)
universal and reliable use in steel and stainless steel
excellent combination of wear resistance and toughness - HC7535 coated (TiAlN)
universal and reliable use in steel and stainless steel with increased impact loads
optimised for machining in unfavourable cutting conditions
from 18,90 €
Prices excl. VAT plus shipping costs
- Brand: ATORN®
- Article no.: 1296400604
Product description
129640 Indexable cutting insert WCHX HC7625 (P, M)Indexable cutting inserts WCHX- Solid carbide indexable cutting inserts WCHX for facing and longitudinal turning, drilling, countersinking and chamfering
- HW7310 uncoated
innovative cutting edge geometry with extremely sharp cutting edges for reliable machining of non-ferrous metals
very hard substrate for long service lives
very good chip breaking thanks to chip breaker - HC7625 coated (TiN)
universal and reliable use in steel and stainless steel
excellent combination of wear resistance and toughness - HC7535 coated (TiAlN)
universal and reliable use in steel and stainless steel with increased impact loads
optimised for machining in unfavourable cutting conditions
Indexable cutting inserts WCHX- Solid carbide indexable cutting inserts WCHX for facing and longitudinal turning, drilling, countersinking and chamfering
- HW7310 uncoated
innovative cutting edge geometry with extremely sharp cutting edges for reliable machining of non-ferrous metals
very hard substrate for long service lives
very good chip breaking thanks to chip breaker - HC7625 coated (TiN)
universal and reliable use in steel and stainless steel
excellent combination of wear resistance and toughness - HC7535 coated (TiAlN)
universal and reliable use in steel and stainless steel with increased impact loads
optimised for machining in unfavourable cutting conditions
from 7,84 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?