User video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers

• No surface damage to the bar stock to be machined
• Grips bar stock Ø 3 - 90 mm
• Operating method: Rapid traverse, 30 m/min
• Accuracy: ± 0.1 mm (without stop)
• Material projection length: 4 mm is enough for gripping
• Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  
• Operating method:
  After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  
• Requirement:
  "Automatically open and close chuck" option
  The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
  

Bar gripper with VDI shank, no gripper jaws
User video on YouTube or www.sartorius-werkzeuge.de

CNC bar grippers

• No surface damage to the bar stock to be machined
• Grips bar stock Ø 3 - 90 mm
• Operating method: Rapid traverse, 30 m/min
• Accuracy: ± 0.1 mm (without stop)
• Material projection length: 4 mm is enough for gripping
• Holding shank with low tooling time, available in all sizes and versions (VDI/straight shank)
  
• Operating method:
  After parting-off the workpiece, the bar gripper automatically pulls the bar to the exact dimension required for further machining at rapid traverse.
  
• Requirement:
  "Automatically open and close chuck" option
  The material bar may measure up to 1,500 mm long; the entire length must be driven into the spindle by a spindle reducer
  

Bar gripper with VDI shank, no gripper jaws