End milling cutter for Ni all., ceramic, 6 mm Z=4 HA

Special offer:
94,80 €
(237,00 € catalogue price / 60% saved)
prices excl. vat plus shipping costs

Stock status
Only 1 pieces left!

Ordered by 19:30 - delivered tomorrow.

Specially for nickel alloys

Ceramics milling cutter
  • Helix angle 15°
  • For machining nickel-based alloys e.g. Inconel
  • Always use air cooling
  • Ensure continuous machining
  • Do not remove the chips from the cutting area
  • Attention: Tool, chips and workpiece can get very hot

Article no./ATORN no.
2551530060 / 11263797
Packaging unit
1
Catalogue page

Technical characteristics

Application direction milling Lining, ramping and drilling
Application milling MSC
Center cutting Yes
Coolant supply External
Cutting data Cutting angle Information - yes
Cutting material Ceramics
D 6 mm
D1 6 mm
Durchmesser max. 20 mm
Durchmesser min. 6 mm
Durchmesser min./max. 6-20 mm
E 0,15 mm
Form Torus
Freistellungsdurchmesser 5,7 mm
Geeignet für Werkstoffgruppe H 3
Geeignet für Werkstoffgruppe K 3
Geeignet für Werkstoffgruppe M 2
Geeignet für Werkstoffgruppe N 3
Geeignet für Werkstoffgruppe P 3
Geeignet für Werkstoffgruppe S 1
Kantenradius 0,4 mm
Kraglänge 12 mm
L 51 mm
L1 3 mm
L2 12 mm
R 0,40 mm
Rake angle 0 °
Schneidendurchmesser max. 20 mm
Schneidendurchmesser min. 6 mm
Schneidendurchmesser min./max. 6-20 mm
Surface Uncoated
Tolerance of cutting edge diameter e8
Tolerance of shank diameter h5
Tool holding device HA parallel shank
Twist angle 15°
Z 4 pc.

Usage characteristics

superalloys Fe/NiCo based < 30 HRC
superalloys Fe/NiCo based ≥ 30 HRc
    
very suitable
suitable