Broaches

Product finder

Filter by:

Product description

234001 Push broach for keyway width JS9Push broaches (keyway broaches)

For manufacturing true-to-size and precisely centred keyways in accordance with DIN 6885
Can be used on normal workshop presses (hand press or hydraulic press); no special machinery required
Low tooling time
Good surface finish on machined workpieces
Manufacturing time for one keyway only approx. 1 minute
Broaches supplied with inserts for achieving the cutting depth
Special alloy HSS steel for machining any materials with a hardness of up to 34 HRC
Broaches with other rake angles are available on request for machining solid or very soft materials.
Square and multi-purpose four square broaches are available on request.
From size 32 x 102, guide bush without collar
Use:
1. Slide guide bush into workpiece bore and insert broach until the first tooth on the workpiece is standing upright
2. Lubricate broach
3. Push broach in approx. 1/3
4. Briefly release plunger and push broach in fully
5. Clean broach and fit insert for the second pass
6. Repeat broaching operation

Broaches
Push broaches (keyway broaches)

For manufacturing true-to-size and precisely centred keyways in accordance with DIN 6885
Can be used on normal workshop presses (hand press or hydraulic press), no special machinery required
Low tooling time
Good surface finish on machined workpieces
Manufacturing time for one keyway only approx. 1 minute
Broaches supplied with inserts for achieving the cutting depth
Special alloy HSS steel for machining any materials with a hardness of up to 34 HRC
Broaches with other rake angles are available on request for machining solid or very soft materials.
Square and multi-purpose four square broaches are available on request.
From size 32 x 102, guide bush without collar
Use:
1. Slide guide bush into workpiece bore and insert broach until the first tooth on the workpiece is standing upright
2. Lubricate broach
3. Push broach in approx. 1/3
4. Briefly release plunger and push broach in fully
5. Clean broach and fit insert for the second pass
6. Repeat broaching operation

Broaches

from 205,00 €

Prices excl. VAT plus shipping costs

Product description

234010 Push broach for keyway widthsPush broaches (keyway broaches)

For manufacturing true-to-size and precisely centred keyways in accordance with DIN 6885
Can be used on normal workshop presses (hand press or hydraulic press), no special machinery required
Low tooling time
Good surface finish on machined workpieces
Manufacturing time for one keyway only approx. 1 minute
Broaches supplied with inserts for achieving the cutting depth
Special alloy HSS steel for machining any materials with a hardness of up to 34 HRC
Broaches with other rake angles are available on request for machining solid or very soft materials.
Square and multi-purpose four square broaches are available on request.
From size 32 x 102, guide bush without collar
Use:
1. Slide guide bush into workpiece bore and insert broach until the first tooth on the workpiece is standing upright
2. Lubricate broach
3. Push broach in approx. 1/3
4. Briefly release plunger and push broach in fully
5. Clean broach and fit insert for the second pass
6. Repeat broaching operation

Sets

from 1.399,00 €

Prices excl. VAT plus shipping costs