- Brand: THERMDRILL
- Article no.: 1029001000
Product description
102800 Flow drill basic equipment including 3 colletsThermal drill bits (flow drill)For a lower wall thickness, often only 1-2 threads can be inserted. These are generally not sufficient for a load-bearing thread. With the THERMDRILL process, you can create extremely stable thread bushes in seconds in only two steps. Protected against rotation and resistant to vibrations. Ideal for thin-walled sheet steel, pipes and profiles as the thread bushes are produced as if from one cast.
- Wobbling, loosening or rotating (as with rivet nuts) no longer possible
- Additional inserts no longer required
- Especially suitable for round tubes
- Secure hold even in sheet metal and hollow profiles
- No waste, chip-free process by using friction heat
- Better quality thread due to shaped instead of cut thread (material reinforcement)
- Long service life of tools thanks to polygon-ground solid carbide
Basic equipment- Incl. ER32 - Ø 6, 8 and 10 mm collets
from 455,00 €
Prices excl. VAT plus shipping costs
- Brand: THERMDRILL
- Article no.: 1029020100
Product description
102901 102902 Flow drill type F, shortThermal drill bits (flow drill)For a lower wall thickness, often only 1-2 threads can be inserted. These are generally not sufficient for a load-bearing thread. With the THERMDRILL process, you can create extremely stable thread bushes in seconds in only two steps. Protected against rotation and resistant to vibrations. Ideal for thin-walled sheet steel, pipes and profiles as the thread bushes are produced as if from one cast.
- Wobbling, loosening or rotating (as with rivet nuts) no longer possible
- Additional inserts no longer required
- Especially suitable for round tubes
- Secure hold even in sheet metal and hollow profiles
- No waste, chip-free process by using friction heat
- Better quality thread due to shaped instead of cut thread (material reinforcement)
- Long service life of tools thanks to polygon-ground solid carbide
FORM type thermal drill bits- for bushes with collar
- Type FORM forms a bulge from material flowing upwards
from 55,20 €
Prices excl. VAT plus shipping costs
- Brand: THERMDRILL
- Article no.: 1029030040
Product description
102903 102904 Flow drill type C, shortThermal drill bits (flow drill)For a lower wall thickness, often only 1-2 threads can be inserted. These are generally not sufficient for a load-bearing thread. With the THERMDRILL process, you can create extremely stable thread bushes in seconds in only two steps. Protected against rotation and resistant to vibrations. Ideal for thin-walled sheet steel, pipes and profiles as the thread bushes are produced as if from one cast.
- Wobbling, loosening or rotating (as with rivet nuts) no longer possible
- Additional inserts no longer required
- Especially suitable for round tubes
- Secure hold even in sheet metal and hollow profiles
- No waste, chip-free process by using friction heat
- Better quality thread due to shaped instead of cut thread (material reinforcement)
- Long service life of tools thanks to polygon-ground solid carbide
CUT type thermal drill bits- for bushes without collar
- Type CUT cuts the material protruding upwards flat
from 112,50 €
Prices excl. VAT plus shipping costs
- Brand: THERMDRILL
- Article no.: 1029100040
Product description
102910 102920 Flow drill tool set, drill and former, type F, shortThermal drill bits (flow drill)For a lower wall thickness, often only 1-2 threads can be inserted. These are generally not sufficient for a load-bearing thread. With the THERMDRILL process, you can create extremely stable thread bushes in seconds in only two steps. Protected against rotation and resistant to vibrations. Ideal for thin-walled sheet steel, pipes and profiles as the thread bushes are produced as if from one cast.
- Wobbling, loosening or rotating (as with rivet nuts) no longer possible
- Additional inserts no longer required
- Especially suitable for round tubes
- Secure hold even in sheet metal and hollow profiles
- No waste, chip-free process by using friction heat
- Better quality thread due to shaped instead of cut thread (material reinforcement)
- Long service life of tools thanks to polygon-ground solid carbide
FORM type tool sets- including forming taps
- for bushes with collar
- Type FORM forms a bulge from material flowing upwards
from 126,00 €
Prices excl. VAT plus shipping costs
- Brand: THERMDRILL
- Article no.: 1029300040
Product description
102930 102940 Flow drill tool set, drill and former, type C, shortThermal drill bits (flow drill)For a lower wall thickness, often only 1-2 threads can be inserted. These are generally not sufficient for a load-bearing thread. With the THERMDRILL process, you can create extremely stable thread bushes in seconds in only two steps. Protected against rotation and resistant to vibrations. Ideal for thin-walled sheet steel, pipes and profiles as the thread bushes are produced as if from one cast.
- Wobbling, loosening or rotating (as with rivet nuts) no longer possible
- Additional inserts no longer required
- Especially suitable for round tubes
- Secure hold even in sheet metal and hollow profiles
- No waste, chip-free process by using friction heat
- Better quality thread due to shaped instead of cut thread (material reinforcement)
- Long service life of tools thanks to polygon-ground solid carbide
CUT type tool sets- including forming taps
- for bushes without collar
- Type CUT cuts the material protruding upwards flat
from 162,50 €
Prices excl. VAT plus shipping costs
- Brand: THERMDRILL
- Article no.: 1029810100
Product description
102980 Flow drill paste and oilThermal drill bits (flow drill)For a lower wall thickness, often only 1-2 threads can be inserted. These are generally not sufficient for a load-bearing thread. With the THERMDRILL process, you can create extremely stable thread bushes in seconds in only two steps. Protected against rotation and resistant to vibrations. Ideal for thin-walled sheet steel, pipes and profiles as the thread bushes are produced as if from one cast.
- Wobbling, loosening or rotating (as with rivet nuts) no longer possible
- Additional inserts no longer required
- Especially suitable for round tubes
- Secure hold even in sheet metal and hollow profiles
- No waste, chip-free process by using friction heat
- Better quality thread due to shaped instead of cut thread (material reinforcement)
- Long service life of tools thanks to polygon-ground solid carbide
Paste and thread forming oil- Paste to protect the thermal drill from excessive wear
- High-performance oil especially suitable for thread forming in aluminium, copper, brass, steel and stainless steel
from 36,10 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?