- Brand: SARA®
- Article no.: 1045500052
- Catalogue page: KS-0219
- Cutting values: SW-0384
Product description
104550 Cutting edge SARADRILL ASP30 for boring headSARADRILL solid drilling tool- Machining of bore holes from Ø 49 to 270 mm
- For machines with low drive power
- Low-vibration, equipment-friendly machining with up to 50 % less drive power
- Drilling in a single operation without centring and pre-drilling
- No front face planing required
- Cost-efficient boring system, since differences in diameter of up to 30 mm can be machined with one boring head by changing the cutting edges
- Variable drilling depths of up to 15 x D due to holding fixture system with pluggable extensions
- Internal coolant supply directly to the cutting edge, no high-pressure pump required
- For rotating tools, the coolant is supplied via a coolant ring
- Short chips due to chip-separating grooves in the roughing blade, no chip removal, even with extremely deep bores
- Also for use on vertically operating machines
- Low tool costs as wear is limited to the cutting edges and centre bit
- Unproblematic regrinding of the centre bit and the cutting edges (in pairs) using the grinding fixture or the tool grinding machine
- Cutting material:
Cutting edge HSS-E-PM ASP30, ASP30 TiN
HSS centre bit - For use on all machine tools as a rotating or stationary tool especially for machining large bore diameters on machines with low drive power
- Caution: Not suitable for boring out existing holes!
SARADRILL cutting edge- For SARADRILL solid drilling tools
- The cutting edges are delivered in pairs, i.e. 1 roughing blade and 1 finishing blade.
- Note for machining blind holes:
The finishing blade can be adjusted from 3 to 10 mm, depending on the size of the drill head, to machine intermediate dimensions. (Not permissible for machining through-holes!) - Caution: The cutting edges may only be replaced in pairs to prevent the risk of breakage!
- Prices per pair (1 roughing blade and 1 finishing blade)
from 102,00 €
Prices excl. VAT plus shipping costs
- Brand: SARA®
- Article no.: 1045550062
- Catalogue page: KS-0219
- Cutting values: SW-0384
Product description
104555 Cutting edge SARADRILL ASP30 for boring head TiNSARADRILL solid drilling tool- Machining of bore holes from Ø 49 to 270 mm
- For machines with low drive power
- Low-vibration, equipment-friendly machining with up to 50 % less drive power
- Drilling in a single operation without centring and pre-drilling
- No front face planing required
- Cost-efficient boring system, since differences in diameter of up to 30 mm can be machined with one boring head by changing the cutting edges
- Variable drilling depths of up to 15 x D due to holding fixture system with pluggable extensions
- Internal coolant supply directly to the cutting edge, no high-pressure pump required
- For rotating tools, the coolant is supplied via a coolant ring
- Short chips due to chip-separating grooves in the roughing blade, no chip removal, even with extremely deep bores
- Also for use on vertically operating machines
- Low tool costs as wear is limited to the cutting edges and centre bit
- Unproblematic regrinding of the centre bit and the cutting edges (in pairs) using the grinding fixture or the tool grinding machine
- Cutting material:
Cutting edge HSS-E-PM ASP30, ASP30 TiN
HSS centre bit - For use on all machine tools as a rotating or stationary tool especially for machining large bore diameters on machines with low drive power
- Caution: Not suitable for boring out existing holes!
SARADRILL cutting edge- For SARADRILL solid drilling tools
- The cutting edges are delivered in pairs, i.e. 1 roughing blade and 1 finishing blade.
- Note for machining blind holes:
The finishing blade can be adjusted from 3 to 10 mm, depending on the size of the drill head, to machine intermediate dimensions. (Not permissible for machining through-holes!) - Caution: The cutting edges may only be replaced in pairs to prevent the risk of breakage!
- Prices per pair (1 roughing blade and 1 finishing blade)
from 114,40 €
Prices excl. VAT plus shipping costs
Shopping cart contains offer
The shopping cart currently contains articles from offer and cannot contain any further articles.
Do you want to empty the shopping cart and add this article?