SC machine reamer sim. to DIN212 Type D Ø12.31mm +0/+0.005 (steel/cast iron/NF)

SC machine reamer sim. to DIN212 Type D Ø12.31mm +0/+0.005 (steel/cast iron/NF)
SC machine reamer sim. to DIN212 Type D Ø12.31mm +0/+0.005 (steel/cast iron/NF) SC machine reamer sim. to DIN212 Type D Ø12.31mm +0/+0.005 (steel/cast iron/NF)
Price:
312,00 €
prices excl. vat plus shipping costs

Stock status
subsequent delivery
Add to shopping cart
Tool Finder
1/100 solid carbide machine reamers
  • sim. to DIN 212
  • Type B, type D from Ø 3.76 mm
  • 10° left-hand twist, right-hand cutting, straight shank
  • 1/100 pitch
  • Tolerances:
    Ø 0.60 to 3.00 mm +0/+ 0.003
    Ø 3.01 to 6.00 mm +0/+ 0.004
    Ø 6.01 to 13.05 mm +0/+ 0.005
  • Cutting material: solid carbide K15F (Ø > 13.97 with carbide head)
  • For through-holes

Specify nominal dimension D in mm as a four digit figure:
  • e.g. 0.72 mm = 0072, 5.14 mm = 0514, 11.00 mm = 1100

1/100 solid carbide machine reamers
  • sim. to DIN 212
  • Type B, type D from Ø 3.76 mm
  • 10° left-hand twist, right-hand cutting, straight shank
  • 1/100 pitch
  • Tolerances:
    Ø 0.60 to 3.00 mm +0/+ 0.003
    Ø 3.01 to 6.00 mm +0/+ 0.004
    Ø 6.01 to 13.05 mm +0/+ 0.005
  • Cutting material: solid carbide K15F (Ø > 13.97 with carbide head)
  • For through-holes

Specify nominal dimension D in mm as a four digit figure:
  • e.g. 0.72 mm = 0072, 5.14 mm = 0514, 11.00 mm = 1100

Article no./ATORN no.
1630021231
Packaging unit
1
Catalogue page
KS-0332
Cutting values
SW-0405

Technical characteristics

Cutting data Cutting angle Information - yes
Cutting data Cutting angle Information - yes
Cutting material Solid carbide
Cutting material Solid carbide
D 12,31 mm
D 12,31 mm
D1 12 mm
D1 12 mm
DIN Company standard
DIN Company standard
Feed f steel < 1000 N/mm² 0,25 mm/rev
Feed f steel < 1000 N/mm² 0,25 mm/rev
L 151 mm
L 151 mm
L1 44 mm
L1 44 mm
Tolerance of hole diameter H7
Tolerance of hole diameter H7
Tool holding device HA parallel shank
Tool holding device HA parallel shank
Twist angle 10° (left)
Twist angle 10° (left)
Z 6 pc.
Z 6 pc.

Usage characteristics

aluminium < 8 % Si
aluminium < 8 % Si
aluminium ≥ 8 % Si
aluminium ≥ 8 % Si
brass short
brass short
cast iron GG/GTS
cast iron GG/GTS
cast iron GGG
cast iron GGG
stainless steel austenitic
stainless steel austenitic
stainless steel ferrit./martens.
stainless steel ferrit./martens.
steel < 1000 N/mm²
steel < 1000 N/mm²
steel < 1400 N/mm²
steel < 1400 N/mm²
steel < 700 N/mm²
steel < 700 N/mm²
    
very suitable
suitable
Catalogue page Download
Cutting values Download
Catalogue page Download
Cutting values Download