SC machine reamer sim. to DIN212 Type D Ø4.51mm +0/+0.004 (steel/cast iron/NF)

SC machine reamer sim. to DIN212 Type D Ø4.51mm +0/+0.004 (steel/cast iron/NF)
SC machine reamer sim. to DIN212 Type D Ø4.51mm +0/+0.004 (steel/cast iron/NF) SC machine reamer sim. to DIN212 Type D Ø4.51mm +0/+0.004 (steel/cast iron/NF)
Price:
76,10 €
prices excl. vat plus shipping costs

Stock status
subsequent delivery
Add to shopping cart
Tool Finder
1/100 solid carbide machine reamers
  • sim. to DIN 212
  • Type B, type D from Ø 3.76 mm
  • 10° left-hand twist, right-hand cutting, straight shank
  • 1/100 pitch
  • Tolerances:
    Ø 0.60 to 3.00 mm +0/+ 0.003
    Ø 3.01 to 6.00 mm +0/+ 0.004
    Ø 6.01 to 13.05 mm +0/+ 0.005
  • Cutting material: solid carbide K15F (Ø > 13.97 with carbide head)
  • For through-holes

Specify nominal dimension D in mm as a four digit figure:
  • e.g. 0.72 mm = 0072, 5.14 mm = 0514, 11.00 mm = 1100

1/100 solid carbide machine reamers
  • sim. to DIN 212
  • Type B, type D from Ø 3.76 mm
  • 10° left-hand twist, right-hand cutting, straight shank
  • 1/100 pitch
  • Tolerances:
    Ø 0.60 to 3.00 mm +0/+ 0.003
    Ø 3.01 to 6.00 mm +0/+ 0.004
    Ø 6.01 to 13.05 mm +0/+ 0.005
  • Cutting material: solid carbide K15F (Ø > 13.97 with carbide head)
  • For through-holes

Specify nominal dimension D in mm as a four digit figure:
  • e.g. 0.72 mm = 0072, 5.14 mm = 0514, 11.00 mm = 1100

Article no./ATORN no.
1630020451
Packaging unit
1
Catalogue page
KS-0332
Cutting values
SW-0405

Technical characteristics

Cutting data Cutting angle Information - yes
Cutting data Cutting angle Information - yes
Cutting material Solid carbide
Cutting material Solid carbide
D 4,51 mm
D 4,51 mm
D1 4,5 mm
D1 4,5 mm
DIN Company standard
DIN Company standard
Feed f steel < 1000 N/mm² 0,15 mm/rev
Feed f steel < 1000 N/mm² 0,15 mm/rev
L 80 mm
L 80 mm
L1 21 mm
L1 21 mm
Tolerance of hole diameter H7
Tolerance of hole diameter H7
Tool holding device HA parallel shank
Tool holding device HA parallel shank
Twist angle 10° (left)
Twist angle 10° (left)
Z 6 pc.
Z 6 pc.

Usage characteristics

aluminium < 8 % Si
aluminium < 8 % Si
aluminium ≥ 8 % Si
aluminium ≥ 8 % Si
brass short
brass short
cast iron GG/GTS
cast iron GG/GTS
cast iron GGG
cast iron GGG
stainless steel austenitic
stainless steel austenitic
stainless steel ferrit./martens.
stainless steel ferrit./martens.
steel < 1000 N/mm²
steel < 1000 N/mm²
steel < 1400 N/mm²
steel < 1400 N/mm²
steel < 700 N/mm²
steel < 700 N/mm²
    
very suitable
suitable
Catalogue page Download
Cutting values Download
Catalogue page Download
Cutting values Download