Precision test pin sets

• For directly measuring bore tolerances, measuring distances between two bores, testing the eccentricity of bushes, testing angles and profiles
• Setting masters for length measurement devices, also for checking bore positions
• For parallelism tests, thread and toothing tests
• Gauge steel hardened to 58 - 62 HRC, single-aged, ground and lapped
• Ø tolerance:
  Degree of accuracy 1 = ± 0.001 mm
  Degree of accuracy 2 = ± 0.002 mm
• Total length: Ø 0.30 - 0.99 = 40 mm / Ø 1.00 - 20.0 = 70 mm
• From Ø 1.50 mm, marked with dimensions
• Wooden box with drilled and labelled inserts
• Other set configurations available on request

Precision test pin sets

• For directly measuring bore tolerances, measuring distances between two bores, testing the eccentricity of bushes, testing angles and profiles
• Setting masters for length measurement devices, also for checking bore positions
• For parallelism tests, thread and toothing tests
• Gauge steel hardened to 58 - 62 HRC, single-aged, ground and lapped
• Ø tolerance:
  Degree of accuracy 1 = ± 0.001 mm
  Degree of accuracy 2 = ± 0.002 mm
• Total length: Ø 0.30 - 0.99 = 40 mm / Ø 1.00 - 20.0 = 70 mm
• From Ø 1.50 mm, marked with dimensions
• Wooden box with drilled and labelled inserts
• Other set configurations available on request