Deburring countersink HSS sim. to DIN335C 90° 6,3mm shank length 150mm

Deburring countersink HSS sim. to DIN335C 90° 6,3mm shank length 150mm
Deburring countersink HSS sim. to DIN335C 90° 6,3mm shank length 150mm Deburring countersink HSS sim. to DIN335C 90° 6,3mm shank length 150mm
Price:
48,00 €
prices excl. vat plus shipping costs

Stock status
in stock
External stock
available
Add to shopping cart
Tool Finder

Ordered by 19:30 - delivered tomorrow.

Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Extra-long shank, similar to DIN 335C
  • 40, 50 and 63 mm diameters available on request

Taper and deburring countersinks
  • 3 cutting edges
  • Radially relief-ground
  • Cutting material: HSS, HSS TiN, HSS TiAlN
  • For countersinking and deburring
  • Countersunk Ø match the respective countersunk DIN screw heads (DIN 963, 964, 965, 966, 7991)

Extra-long shank, similar to DIN 335C
  • 40, 50 and 63 mm diameters available on request

Article no./ATORN no.
1501020063 / 10640502
Packaging unit
1
Catalogue page
KS-0313
Cutting values
SW-0403

Technical characteristics

Angle of the tip - S 90 °
Angle of the tip - S 90 °
Coating uncoated
Coating uncoated
Coolant supply External
Coolant supply External
Countersink angle 90 °
Countersink angle 90 °
Cutting data Cutting angle Information - yes
Cutting data Cutting angle Information - yes
Cutting material HSS
Cutting material HSS
D1 5 mm
D1 5 mm
Design L4 = 150 mm
Design L4 = 150 mm
DIN 0 - nicht applicable
DIN 0 - nicht applicable
Eignung Edelstahl gesamt 3
Eignung nicht Eisen gesamt 2
Eignung Titan/Nickel/Super gesamt 3
f Stahl 700 0,08 mm/rev
Feed f steel < 1000 N/mm² 0,06 mm/rev
Feed f steel < 1000 N/mm² 0,06 mm/rev
fitness hartl total 3
Length 154 mm
Shank length 150 mm
Spot-facer diameter 6,3 mm
Surface Uncoated
Surface Uncoated
Tip diameter 1,5 mm
Tip diameter 1,5 mm
Tolerance of shank diameter h9
Tolerance of shank diameter h9
Tool holding device HA parallel shank
Tool holding device HA parallel shank
Type Kegelsenker 90°
Type Countersink 90°
Z 3 pc.
Z 3 pc.

Usage characteristics

aluminium < 8 % Si
aluminium < 8 % Si
aluminium ≥ 8 % Si
aluminium ≥ 8 % Si
brass long
brass long
brass short
brass short
bronze long
bronze long
bronze short
bronze short
cast iron GG/GTS
cast iron GG/GTS
cast iron GGG
cast iron GGG
D 6,3 mm
D 6,3 mm
L 154 mm
L 154 mm
L4 150 mm
L4 150 mm
plastic
plastic
stainless steel austenitic
stainless steel austenitic
stainless steel duplex
stainless steel duplex
stainless steel ferrit./martens.
stainless steel ferrit./martens.
steel < 1000 N/mm²
steel < 1000 N/mm²
steel < 1400 N/mm²
steel < 1400 N/mm²
steel < 700 N/mm²
steel < 700 N/mm²
    
very suitable
suitable
Catalogue page Download
Cutting values Download
STEP Download
DXF Download
Catalogue page Download
Cutting values Download
ASSET_MatSafetyDataSheet Download