Surftest SJ-210 surface roughness testing equipment

Price:
1.350,00 €
(2.410,00 € catalogue price / 44% saved)
valid until: 30.06.2024
prices excl. vat plus shipping costs

Stock status
in stock

Ordered by 19:30 - delivered tomorrow.

Surftest SJ-210 surface roughness tester
  • Handy mobile test device, designed for use in production environments
  • Compact design
  • Easy to handle
  • Suitable for measuring surface roughness directly on the clamped workpiece during production or stationary inspections
  • Large, easy-to-read 6 cm (2.4'') colour LCD display, can be rotated electronically
  • Profiles displayed in real time
  • Integrated memory for 10 measurement conditions
  • Memory can be expanded with a micro SD card up to max. 2 GB: e.g. 500 measurement conditions + 10,000 measurement values or 500 measurement conditions + 500 profiles, analysis software on request
  • With RS232C, Digimatic and USB interfaces
  • Foot switch connector
  • Colour-based tolerance evaluation
  • Allocation of access rights
  • Choice of 16 languages
  • Switchable mains or battery operation
  • Feed unit can either be integrated in the device or used separately with a connection cable
  • Motorised feed with up to 3 user-selectable measuring speeds
  • Probe system skid radius 40 mm, skid pressure force < 400 mN
  • Probe tip geometry in accordance with DIN EN ISO 3274, radius 2 µm, point angle 60°
  • Double skid system for measuring sheet metal in accordance with DIN EN ISO 10049 available on request, comprehensive optional accessories on the following pages
  • Technical data
    Profiles: Roughness profile (R), DF profile, R motif
    Standards: DIN EN ISO, VDA, ANSI, JIS, user-defined conditions
    Measurement range: 360 µm
    Evaluation parameters: Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, Rmax, Rz1max, S, HSC, RzJIS, Rppi, R?a, R?q, Rlr, Rmr, Rmr(c), Rdc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR
    Cut-off lengths: ?c: 0.08, 0.25, 0.8 and 2.5 mm
    Digital filters: Gaussian, 2CR75, PC75
    Number of individual measurement sections: 1 to 10
    Limit wavelength ?s: Set to specification
    Measuring force: 0.75 mN
    Power supply: Mains adapter 230 V, 50 Hz and fitted battery
  • Supplied with roughness standard, mains adapter, protective film for the display, carry bag and operating manual

Surftest SJ-210 surface roughness tester
  • Handy mobile test device, designed for use in production environments
  • Compact design
  • Easy to handle
  • Suitable for measuring surface roughness directly on the clamped workpiece during production or stationary inspections
  • Large, easy-to-read 6 cm (2.4'') colour LCD display, can be rotated electronically
  • Profiles displayed in real time
  • Integrated memory for 10 measurement conditions
  • Memory can be expanded with a micro SD card up to max. 2 GB: e.g. 500 measurement conditions + 10,000 measurement values or 500 measurement conditions + 500 profiles, analysis software on request
  • With RS232C, Digimatic and USB interfaces
  • Foot switch connector
  • Colour-based tolerance evaluation
  • Allocation of access rights
  • Choice of 16 languages
  • Switchable mains or battery operation
  • Feed unit can either be integrated in the device or used separately with a connection cable
  • Motorised feed with up to 3 user-selectable measuring speeds
  • Probe system skid radius 40 mm, skid pressure force < 400 mN
  • Probe tip geometry in accordance with DIN EN ISO 3274, radius 2 μm, point angle 60°
  • Double skid system for measuring sheet metal in accordance with DIN EN ISO 10049 available on request, comprehensive optional accessories on the following pages
  • Technical data
    Profiles: Roughness profile (R), DF profile, R motif
    Standards: DIN EN ISO, VDA, ANSI, JIS, user-defined conditions
    Measurement range: 360 µm
    Evaluation parameters: Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, Rmax, Rz1max, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR
    Cut-off lengths: λc: 0.08, 0.25, 0.8 and 2.5 mm
    Digital filters: Gaussian, 2CR75, PC75
    Number of individual measurement sections: 1 to 10
    Limit wavelength λs: Set to specification
    Measuring force: 0.75 mN
    Power supply: Mains adapter 230 V, 50 Hz and fitted battery
  • Supplied with roughness standard, mains adapter, protective film for the display, carry bag and operating manual

Article no./ATORN no.
5705210210
Vendor Article no.
178-560-11D
Packaging unit
1
Catalogue page

Technical characteristics

Data transmission type DIGIMATIC/USB
Designation SURFTEST SJ-210 surface roughness tester
Designation SURFTEST SJ-210 surface roughness tester