Combination counterbore HSS model 2 30mm 

Combination counterbore HSS model 2 30mm
Combination counterbore HSS model 2 30mm
Description
Combination counterbores
  • Just 3 holder sizes required to cover a countersink range of 7 - 66 mm (on request up to 84 mm).
  • Any countersink and pilot pin combination possible within the same holder size.
  • Tight bore and shank tolerances ensure a high degree of true-running accuracy.
  • Countersink and pin are fastened quickly and securely with just one screw. An additional stud safety catch prevents countersinks from twisting.
  • Combine elements to produce countersinks for DIN screws and to machine stepped bores or non-standard countersinks
  • 4 cutting edges

Counterbore model 2
  • Countersink range 24 - 66 mm
  • Cutting length 27 mm
  • Shank Ø 22mm

Combination counterbores
  • Just 3 holder sizes required to cover a countersink range of 7 - 66 mm (on request up to 84 mm).
  • Any countersink and pilot pin combination possible within the same holder size.
  • Tight bore and shank tolerances ensure a high degree of true-running accuracy.
  • Countersink and pin are fastened quickly and securely with just one screw. An additional stud safety catch prevents countersinks from twisting.
  • Combine elements to produce countersinks for DIN screws and to machine stepped bores or non-standard countersinks
  • 4 cutting edges

Counterbore model 2
  • Countersink range 24 - 66 mm
  • Cutting length 27 mm
  • Shank Ø 22mm

Article no./ATORN no.
1510200300
Vendor Article no.
2N-30,0
Packaging unit
1
Catalogue page
KS-0323
Stock status
subsequent delivery
Price
182,00 €
Add to shopping cart
Tool Finder

Technical characteristics

Coating Coating Cutting data Cutting data Cutting material Cutting material D D DIN Feed f steel < 1000 N/mm² Feed f steel < 1000 N/mm² Jaw quantity Spiral angle Spiral angle Standard constructional dimensions DIN Twist angle Z
uncoated uncoated Cutting angle Information - no Cutting angle Information - no HSS HSS 30,0 mm 30,0 mm Werksnorm 0,3 mm/rev 0,3 mm/rev 4 cutting edges 22° RH helix angle 22° RH helix angle Non-DIN 22° 4 pc.

Usage characteristics

aluminium < 8 % Si aluminium < 8 % Si aluminium ≥ 8 % Si aluminium ≥ 8 % Si brass short cast iron GG/GTS cast iron GG/GTS cast iron GGG cast iron GGG copper Cu-alloy graphite graphite hardened steel < 55 HRc hardened steel < 60 HRc hardened steel < 60 HRc hardened steel ≤ 55 HRC hardened steel ≤ 65 HRC hardened steel ≥ 60 HRc stainless steel austenitic stainless steel austenitic stainless steel duplex stainless steel duplex stainless steel ferrit./martens. stainless steel ferrit./martens. steel < 1000 N/mm² steel < 1000 N/mm² steel < 1400 N/mm² steel < 1400 N/mm² steel < 700 N/mm² steel < 700 N/mm² superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based ≥ 30 HRc superalloys Fe/NiCo based ≥ 30 HRc titanium alloys titanium alloys

very suitable suitable

Catalogue page Download
Catalogue page Download

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 24,-

- for orders over € 100,- delivery costs € 12,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.