Countersink HSS 90° Ø8.3mm irregular pitch

Countersink HSS 90° Ø8.3mm irregular pitch
Countersink HSS 90° Ø8.3mm irregular pitch Countersink HSS 90° Ø8.3mm irregular pitch Countersink HSS 90° Ø8.3mm irregular pitch Countersink HSS 90° Ø8.3mm irregular pitch Countersink HSS 90° Ø8.3mm irregular pitch Countersink HSS 90° Ø8.3mm irregular pitch
Price:
31,30 €
prices excl. vat plus shipping costs

Stock status
in stock
Add to shopping cart
Tool Finder

Ordered by 19:30 - delivered tomorrow.

Taper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Individual
Taper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Individual
Article no./ATORN no.
1501700083
Vendor Article no.
30662980
Packaging unit
1
Catalogue page
KS-0315
Cutting values
SW-0403

Technical characteristics

Angle of the tip - S 90 °
Coating ZrN
Coating ZrN
Cutting data Cutting angle Information - yes
Cutting data Cutting angle Information - yes
Cutting material HSS
D 8,3 mm
D 8,3 mm
D1 6 mm
D1 6 mm
D5 2 mm
Design HSS with straight shank
Design HSS with straight shank
DIN 335
Feed f steel < 700 N/mm² 0,10 mm/rev
Feed f steel < 700 N/mm² 0,10 mm/rev
Jaw quantity 3 cutting edges
L 50 mm
L 50 mm
Point angle Point angle 90°
Shank Straight
Standard constructional dimensions DIN DIN 335C
Tip diameter 2 mm
Tool holding device Cylinder shank
Z 3 pc.

Usage characteristics

aluminium < 8 % Si
aluminium < 8 % Si
brass short
cast iron GG/GTS
cast iron GG/GTS
cast iron GGG
cast iron GGG
copper Cu-alloy
stainless steel austenitic
stainless steel austenitic
stainless steel ferrit./martens.
stainless steel ferrit./martens.
steel < 1000 N/mm²
steel < 1000 N/mm²
steel < 1400 N/mm²
steel < 1400 N/mm²
steel < 700 N/mm²
steel < 700 N/mm²
titanium alloys
titanium alloys
    
very suitable
suitable
Catalogue page Download
Cutting values Download
STEP Download
DXF Download
Catalogue page Download
Cutting values Download