Solid carbide roughing cutter 5mm R=0,2mm Z=4 HA, TiAlN 

Solid carbide roughing cutter 5mm R=0,2mm Z=4 HA, TiAlN
Solid carbide roughing cutter 5mm R=0,2mm Z=4 HA, TiAlN Solid carbide roughing cutter 5mm R=0,2mm Z=4 HA, TiAlN
Description
For machining titanium and stainless steel

VHVTR/W 4/5 end milling cutter
  • Cutting material: ultra-fine grain solid carbide, TiAlSiN-coated
  • Special pre-treatment and finishing treatment due to micro radiation
  • New chip flute geometry for enhanced cooling and chip flow
  • For wet machining, high material removal rate

Standard Z4
Article no./ATORN no.
2550870050
Vendor Article no.
VHVTR40500510506020
Packaging unit
1
Catalogue page
KS-0487
Cutting values
SW-0751
Stock status
Only 15 pieces left!
Special offer:
42,90 € (57,20 € catalogue price / 25% saved)
Add to shopping cart
Tool Finder

Technical characteristics

Application direction milling Coating Cutting data Cutting material D D1 Design Feed for grooving fz stainless steel ferrit./martens. Feed for side milling fz stainless steel ferrit./martens. L L1 R Tolerance of cutting edge diameter Tolerance of shank diameter Tool holding device Twist angle Z
Lining, ramping and drilling TiAlSiN Cutting angle Information - yes Solid carbide 5,0 mm 6 mm DIN 6535-HA 0,025 mm/tooth 0,030 mm/tooth 51 mm 11 mm 0,2 mm e8 h9 HA parallel shank 35° | 38° 4 pc.

Usage characteristics

aluminium < 8 % Si aluminium ≥ 8 % Si brass short cast iron GG/GTS cast iron GGG graphite hardened steel < 60 HRc hardened steel ≤ 55 HRC hardened steel ≤ 65 HRC stainless steel austenitic stainless steel duplex stainless steel ferrit./martens. steel < 1000 N/mm² steel < 1400 N/mm² steel < 700 N/mm² superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based ≥ 30 HRc titanium alloys

very suitable suitable

Catalogue page Download
Cutting values Download

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 24,-

- for orders over € 100,- delivery costs € 12,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.