Countersink set HSS 90° 6.3-25 mm EUC-Speed with 3-face shank 

Countersink set HSS 90° 6.3-25 mm EUC-Speed with 3-face shank
Countersink set HSS 90° 6.3-25 mm EUC-Speed with 3-face shank Countersink set HSS 90° 6.3-25 mm EUC-Speed with 3-face shank Countersink set HSS 90° 6.3-25 mm EUC-Speed with 3-face shank Countersink set HSS 90° 6.3-25 mm EUC-Speed with 3-face shank Countersink set HSS 90° 6.3-25 mm EUC-Speed with 3-face shank
Description
Taper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Sets, 5-pcs.
Taper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Sets, 5-pcs.
Article no./ATORN no.
1501721000
Vendor Article no.
30897967
Packaging unit
1
Catalogue page
KS-0315
Cutting values
SW-0403
Stock status
in stock
Price:
231,00 €
Tool Finder

Technical characteristics

Angle of the tip - S Coating Coating Contents Contents Cutting data Cutting data Design Design DIN Jaw quantity Point angle Shank Standard constructional dimensions DIN Tool holding device Z
90 ° ZrN ZrN 1 piece each 6.3 | 10.4 | 16.5 | 20.5 | 25 mm 1 x 6,3 mm | 1 x 10,4 mm | 1 x 16,5 mm | 1 x 20,5 mm | 1 x 2 Cutting angle Information - yes Cutting angle Information - yes HSS with 3-face shank HSS with 3-face shank 335 3 cutting edges Point angle 90° Straight, 3-facet grinding DIN 335C Parallel shank with three tightening surfaces 3 pc.

Usage characteristics

aluminium < 8 % Si aluminium < 8 % Si aluminium ≥ 8 % Si aluminium ≥ 8 % Si brass short cast iron GG/GTS cast iron GG/GTS cast iron GGG cast iron GGG copper Cu-alloy graphite graphite hardened steel < 55 HRc hardened steel < 60 HRc hardened steel < 60 HRc hardened steel ≤ 55 HRC hardened steel ≤ 65 HRC hardened steel ≥ 60 HRc stainless steel austenitic stainless steel austenitic stainless steel duplex stainless steel duplex stainless steel ferrit./martens. stainless steel ferrit./martens. steel < 1000 N/mm² steel < 1000 N/mm² steel < 1400 N/mm² steel < 1400 N/mm² steel < 700 N/mm² steel < 700 N/mm² superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based ≥ 30 HRc superalloys Fe/NiCo based ≥ 30 HRc titanium alloys titanium alloys

very suitable suitable

Catalogue page Download
Cutting values Download
Catalogue page Download
Cutting values Download

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 22,-

- for orders over € 100,- delivery costs € 11,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.