Countersink, solid carbide 90° 16.5 mm irregular pitch 

Countersink, solid carbide 90° 16.5 mm irregular pitch
Countersink, solid carbide 90° 16.5 mm irregular pitch Countersink, solid carbide 90° 16.5 mm irregular pitch Countersink, solid carbide 90° 16.5 mm irregular pitch Countersink, solid carbide 90° 16.5 mm irregular pitch Countersink, solid carbide 90° 16.5 mm irregular pitch Countersink, solid carbide 90° 16.5 mm irregular pitch
Description
Taper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Individual
Taper and deburring countersink EUC-Speed 90°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Precision design
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating
  • Shank tolerances:
    HSS h9
    Solid carbide h6 (suitable for hydraulic expansion and shrink fit chucks)
  • Versions:
    150170 - HSS with straight shank, Tolerance h9
    150171 - Solid carbide, Tolerance h6 (suitable for hydraulic expansion and shrink fit chucks)
    150172 - HSS with 3 clamping surfaces on the shank to stop rotation of the countersink in the drill chuck with optimum torque transfer
    150173 - HSS with extended straight shank, Tolerance h9

Individual
Article no./ATORN no.
1501710165
Vendor Article no.
30729778
Packaging unit
1
Catalogue page
KS-0315
Cutting values
SW-0403
Stock status
in stock
Price:
198,00 €
Tool Finder

Technical characteristics

Angle of the tip - S Coating Coating Cutting data Cutting data Cutting material Cutting material D D D1 D1 D5 Design Design DIN Feed f steel < 700 N/mm² Feed f steel < 700 N/mm² Jaw quantity L L Point angle Shank Standard constructional dimensions DIN Tip diameter Tool holding device
90 ° ZrN ZrN Cutting angle Information - yes Cutting angle Information - yes Solid carbide Solid carbide 16,5 mm 16,5 mm 10 mm 10 mm 3,2 mm Solid carbide with straight shank Solid carbide with straight shank 335 0,14 mm/rev 0,14 mm/rev 3 cutting edges 60 mm 60 mm Point angle 90° Straight DIN 335C 3,2 mm Cylinder shank

Usage characteristics

aluminium < 8 % Si aluminium < 8 % Si aluminium ≥ 8 % Si aluminium ≥ 8 % Si brass short cast iron GG/GTS cast iron GG/GTS cast iron GGG cast iron GGG copper Cu-alloy graphite graphite hardened steel < 55 HRc hardened steel < 60 HRc hardened steel < 60 HRc hardened steel ≤ 55 HRC hardened steel ≤ 65 HRC hardened steel ≥ 60 HRc stainless steel austenitic stainless steel austenitic stainless steel duplex stainless steel duplex stainless steel ferrit./martens. stainless steel ferrit./martens. steel < 1000 N/mm² steel < 1000 N/mm² steel < 1400 N/mm² steel < 1400 N/mm² steel < 700 N/mm² steel < 700 N/mm² superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based ≥ 30 HRc superalloys Fe/NiCo based ≥ 30 HRc titanium alloys titanium alloys

very suitable suitable

Catalogue page Download
Cutting values Download
STEP Download
DXF Download
Catalogue page Download
Cutting values Download

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 22,-

- for orders over € 100,- delivery costs € 11,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.