Countersink HSS 90° 12.4 mm fine pitch 

Countersink HSS 90° 12.4 mm fine pitch
Countersink HSS 90° 12.4 mm fine pitch Countersink HSS 90° 12.4 mm fine pitch Countersink HSS 90° 12.4 mm fine pitch Countersink HSS 90° 12.4 mm fine pitch
Description
Patented shank and irregular pitch

ADVANCED taper and deburring countersinks
  • 3 cutting edges
  • HSS and HSS TiN cutting material
  • New cutting edge geometry prevents uneven wear of the cutting edges
  • High degree of wear resistance and hot hardness for maximum service life
  • High true running accuracy with considerably reduced force application
  • Patented shank to stop rotation of the countersink in the drill chuck with optimum torque transfer (from Ø 8.3 mm)

Single
Patented shank and irregular pitch

ADVANCED taper and deburring countersinks
  • 3 cutting edges
  • HSS and HSS TiN cutting material
  • New cutting edge geometry prevents uneven wear of the cutting edges
  • High degree of wear resistance and hot hardness for maximum service life
  • High true running accuracy with considerably reduced force application
  • Patented shank to stop rotation of the countersink in the drill chuck with optimum torque transfer (from Ø 8.3 mm)

Single
Article no./ATORN no.
1502700124
Packaging unit
1
Catalogue page
KS-0311
Cutting values
SW-0403
Stock status
in stock
Price:
28,60 €
Add to shopping cart
Tool Finder

Technical characteristics

Angle of the tip - S Angle of the tip - S Coating Coating Cutting data Cutting data Cutting material Cutting material D D D1 D1 DIN DIN Feed f steel < 1000 N/mm² Feed f steel < 1000 N/mm² L L Tip diameter Tip diameter Tool holding device Tool holding device
90 ° 90 ° uncoated uncoated Cutting angle Information - yes Cutting angle Information - yes HSS HSS 12,4 mm 12,4 mm 8 mm 8 mm 335C 335C 0,12 mm/rev 0,12 mm/rev 56 mm 56 mm 2,8 mm 2,8 mm Parallel shank with three tightening surfaces Parallel shank with three tightening surfaces

Usage characteristics

aluminium < 8 % Si aluminium < 8 % Si aluminium ≥ 8 % Si aluminium ≥ 8 % Si brass short brass short cast iron GG/GTS cast iron GG/GTS cast iron GGG cast iron GGG graphite graphite hardened steel < 60 HRc hardened steel < 60 HRc hardened steel ≤ 55 HRC hardened steel ≤ 55 HRC hardened steel ≤ 65 HRC hardened steel ≤ 65 HRC stainless steel austenitic stainless steel austenitic stainless steel duplex stainless steel duplex stainless steel ferrit./martens. stainless steel ferrit./martens. steel < 1000 N/mm² steel < 1000 N/mm² steel < 1400 N/mm² steel < 1400 N/mm² steel < 700 N/mm² steel < 700 N/mm² superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based ≥ 30 HRc superalloys Fe/NiCo based ≥ 30 HRc titanium alloys titanium alloys

very suitable suitable

Catalogue page Download
Cutting values Download
Catalogue page Download
Cutting values Download

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 22,-

- for orders over € 100,- delivery costs € 11,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.