Countersink HSS 60° 25 mm EUC-Speed with 3-face shank 

Countersink HSS 60° 25 mm EUC-Speed with 3-face shank
Countersink HSS 60° 25 mm EUC-Speed with 3-face shank Countersink HSS 60° 25 mm EUC-Speed with 3-face shank
Description
Taper and deburring countersink EUC-Speed 60°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating

Taper and deburring countersink EUC-Speed 60°
  • Geometry with very unequal pitch (EU pitch)
  • High degree of smoothness
  • Prepared cutting edges
  • Radially relief-ground
  • Reduced axial and radial forces
  • Low vibration tendency
  • Special coating

Article no./ATORN no.
1501750250
Vendor Article no.
31051771
Packaging unit
1
Stock status
subsequent delivery
Price:
69,00 €
Tool Finder

Technical characteristics

Angle of the tip - S Coating Coating Cutting data Cutting data D D D1 D1 D5 Design Design DIN Feed f steel < 700 N/mm² Feed f steel < 700 N/mm² Jaw quantity L L Point angle Shank Standard constructional dimensions DIN Tip diameter Tool holding device Z
60 ° ZrN ZrN Cutting angle Information - yes Cutting angle Information - yes 25 mm 25 mm 10 mm 10 mm 6,3 mm With 3-face shank With 3-face shank 0 - not applicable 0,18 mm/rev 0,18 mm/rev 3 cutting edges 71 mm 71 mm Point angle 60° Straight, 3-facet grinding Non-DIN 6,3 mm Parallel shank with three tightening surfaces 3 pc.

Usage characteristics

aluminium < 8 % Si aluminium < 8 % Si aluminium ≥ 8 % Si aluminium ≥ 8 % Si brass short cast iron GG/GTS cast iron GG/GTS cast iron GGG cast iron GGG copper Cu-alloy graphite graphite hardened steel < 55 HRc hardened steel < 60 HRc hardened steel < 60 HRc hardened steel ≤ 55 HRC hardened steel ≤ 65 HRC hardened steel ≥ 60 HRc stainless steel austenitic stainless steel austenitic stainless steel duplex stainless steel duplex stainless steel ferrit./martens. stainless steel ferrit./martens. steel < 1000 N/mm² steel < 1000 N/mm² steel < 1400 N/mm² steel < 1400 N/mm² steel < 700 N/mm² steel < 700 N/mm² superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based ≥ 30 HRc superalloys Fe/NiCo based ≥ 30 HRc titanium alloys titanium alloys

very suitable suitable

Catalogue page Download
Cutting values Download
Catalogue page Download
Cutting values Download

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 22,-

- for orders over € 100,- delivery costs € 11,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.