Solid carbide end milling cutter 10 mm R=0.1 mm Z=5 HB, TiAlN 

Solid carbide end milling cutter 10 mm R=0.1 mm Z=5 HB, TiAlN
Solid carbide end milling cutter 10 mm R=0.1 mm Z=5 HB, TiAlN Solid carbide end milling cutter 10 mm R=0.1 mm Z=5 HB, TiAlN
Description
Other tools with clearance in the van Hoorn manufacturer catalogue

VHRS end milling cutter
  • Cutting material, solid carbide ultra-fine grain TiAlN-coated
  • Special pre-treatment and finishing treatment due to micro radiation
  • Version with 4 or 5 cutting edges
  • For wet and dry machining, extremely high chip removal rates and service life

for trochoid milling

Standard, 5 cutting edges
Article no./ATORN no.
2551011001
Vendor Article no.
VHRSW51000701003010
Packaging unit
1
Catalogue page
KS-0430
Cutting values
SW-0736
Stock status
subsequent delivery
Price:
107,00 €
Tool Finder

Technical characteristics

Application direction milling Center cutting Coating Cutting data Cutting material D D1 Design Feed for side milling fz steel < 1000 mm² L L1 R Tolerance of cutting edge diameter Tolerance of shank diameter Tool holding device Twist angle Z
Lining, ramping and drilling Yes TiAlN Cutting angle Information - yes Solid carbide 10,0 mm 10 mm DIN 6535-HB 0,055 mm/tooth 70 mm 22 mm 0,1 mm e8 h5 HB parallel shank 35° | 38° 5 pc.

Usage characteristics

aluminium < 8 % Si aluminium ≥ 8 % Si brass short cast iron GG/GTS cast iron GGG graphite hardened steel < 60 HRc hardened steel ≤ 55 HRC hardened steel ≤ 65 HRC stainless steel austenitic stainless steel duplex stainless steel ferrit./martens. steel < 1000 N/mm² steel < 1400 N/mm² steel < 700 N/mm² superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based ≥ 30 HRc titanium alloys

very suitable suitable

Catalogue page Download
Cutting values Download

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 22,-

- for orders over € 100,- delivery costs € 11,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.