Solid indexable insert drill P3D 3xD 18 mm 

Solid indexable insert drill P3D 3xD 18 mm
Solid indexable insert drill P3D 3xD 18 mm Solid indexable insert drill P3D 3xD 18 mm Solid indexable insert drill P3D 3xD 18 mm
Description
Range expanded

Indexable inserts solid drill bits PHOENIX PD
  • Optimised substrate geometry for increased stability, improved chip removal and reduced cutting forces
  • Available in tool lengths of 2xD, 3xD, 4xD and 5xD
  • Diameter 12-63mm
  • Wide range of applications in steel, stainless steel, cast iron and aluminium materials
  • Short chips due to additional chip breaker in the chip flute
  • High efficiency thanks to 4 effective cutting edges per indexable insert
  • Same indexable insert can be used as centre and periphery plate
  • With internal coolant supply
  • Please note: Supplied without chuck key (Torx-Plus), please order separately!

P3D - 3xD
  • Bore tolerances:
    Ø 15-20.5 mm > 0/+0.25 mm; Ø 21-49 mm > 0/+0.3 mm; Ø 50-63 mm > 0/+0.35 mm

Range expanded

Indexable inserts solid drill bits PHOENIX PD
  • Optimised substrate geometry for increased stability, improved chip removal and reduced cutting forces
  • Available in tool lengths of 2xD, 3xD, 4xD and 5xD
  • Diameter 12-63mm
  • Wide range of applications in steel, stainless steel, cast iron and aluminium materials
  • Short chips due to additional chip breaker in the chip flute
  • High efficiency thanks to 4 effective cutting edges per indexable insert (from Ø 15 mm)
  • Same indexable insert can be used as centre and periphery plate
  • With internal coolant supply
  • Please note: Supplied without clamping key (Torx-Plus), please order separately.

P3D - 3xD
  • Bore tolerances:
    Ø 15-20.5 mm > 0/+0.25 mm; Ø 21-49 mm > 0/+0.3 mm; Ø 50-63 mm > 0/+0.35 mm

Article no./ATORN no.
1242030180
Vendor Article no.
7803223
Packaging unit
1
Catalogue page
KS-0209
Cutting values
SW-0383
Stock status
in stock
External stock
available
Price:
358,00 €
Add to shopping cart
Tool Finder

Technical characteristics

A Coolant design Coolant supply Cutting data Cutting data D D D max. D max. D1 D1 DIN Drilling depth L L L1 L1 L2 L2 Max. adjustment range Max. drilling depth (D) Shank Standard constructional dimensions DIN suitable indexable inserts suitable indexable inserts Tool holding device
0,5 mm Internal axial Intern axial Cutting angle Information - yes Cutting angle Information - yes 18 mm 18 mm 19,0 mm 19,0 mm 25 mm 25 mm ohne DIN 3xD 128 mm 128 mm 54 mm 54 mm 56 mm 56 mm 0,5 mm 3xD Straight with driving plane Non-DIN XCMT 052404ER XCMT 052404ER Zylinderschaft HB

Usage characteristics

aluminium < 8 % Si aluminium < 8 % Si aluminium ≥ 8 % Si brass short cast iron GG/GTS cast iron GGG copper Cu-alloy graphite hardened steel < 55 HRc hardened steel < 60 HRc hardened steel ≤ 65 HRC hardened steel ≥ 60 HRc stainless steel austenitic stainless steel austenitic stainless steel duplex stainless steel ferrit./martens. stainless steel ferrit./martens. steel < 1000 N/mm² steel < 1000 N/mm² steel < 1400 N/mm² steel < 1400 N/mm² steel < 700 N/mm² steel < 700 N/mm² superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based ≥ 30 HRc superalloys Fe/NiCo based ≥ 30 HRc titanium alloys titanium alloys

very suitable suitable

Catalogue page Download
Cutting values Download
Catalogue page Download
Cutting values Download
Screw FS20543P
Screw FS20543P
1242150004
Being ordered
9,25 €
Order quantity
Wing-handle screwdriver TP6IP 6IP
Being ordered
2,95 €
Order quantity

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 22,-

- for orders over € 100,- delivery costs € 11,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.