Solid carbide high-performance drill 3xD 14mm D1=HB TiN 

Solid carbide high-performance drill 3xD 14mm D1=HB TiN
Solid carbide high-performance drill 3xD 14mm D1=HB TiN Solid carbide high-performance drill 3xD 14mm D1=HB TiN
Description
TiNplus HPC 3D solid carbide high-performance drill bit without internal cooling
  • Newly developed geometry with reinforced core and special point thinning
  • Solid carbide ultra-fine grain cutting material TiNplus (TiAlN+TiN)
  • Modern multi-layer hard coating for maximum service life and optimum chip transport
  • High centring accuracy
  • For universal applications
  • Optimised shank diameter tolerance for use as a holding fixture in power chucks and hydraulic expansion chucks
  • Shank designs up to Ø 2.9 mm HA, from Ø 3.0 mm HB

TiNplus HPC 3D solid carbide high-performance drill bit without internal cooling
  • Newly developed geometry with reinforced core and special point thinning
  • Solid carbide ultra-fine grain cutting material TiNplus (TiAlN+TiN)
  • Modern multi-layer hard coating for maximum service life and optimum chip transport
  • High centring accuracy
  • For universal applications
  • Optimised shank diameter tolerance for use as a holding fixture in power chucks and hydraulic expansion chucks
  • Shank designs up to Ø 2.9 mm HA, from Ø 3.0 mm HB

Article no./ATORN no.
1115030140
Packaging unit
1
Stock status
in stock
Price:
85,30 €
Tool Finder

Technical characteristics

Angle of the tip - S Angle of the tip - S Coating Coating Coolant supply Coolant supply Cutting data Cutting data Cutting material Cutting material D D D1 D1 DIN DIN Feed f steel < 1000 N/mm² Feed f steel < 1000 N/mm² L L L1 L1 Max. drilling depth (D) Max. drilling depth (D) Section shape Section shape Tool holding device Tool holding device Twist angle Twist angle Type Type
140 ° 140 ° TiN plus TiN plus No No Cutting angle Information - yes Cutting angle Information - yes Solid carbide Solid carbide 14 mm 14 mm 14 mm 14 mm 6537 6537 0,28 mm/rev 0,28 mm/rev 107 mm 107 mm 60 mm 60 mm 3xD 3xD Split point Split point HB parallel shank HB parallel shank 30° 30° U U

Usage characteristics

aluminium < 8 % Si aluminium < 8 % Si aluminium ≥ 8 % Si aluminium ≥ 8 % Si brass short brass short cast iron GG/GTS cast iron GG/GTS cast iron GGG cast iron GGG graphite graphite hardened steel < 60 HRc hardened steel < 60 HRc hardened steel ≤ 55 HRC hardened steel ≤ 55 HRC hardened steel ≤ 65 HRC hardened steel ≤ 65 HRC stainless steel austenitic stainless steel austenitic stainless steel duplex stainless steel duplex stainless steel ferrit./martens. stainless steel ferrit./martens. steel < 1000 N/mm² steel < 1000 N/mm² steel < 1400 N/mm² steel < 1400 N/mm² steel < 700 N/mm² steel < 700 N/mm² superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based < 30 HRC superalloys Fe/NiCo based ≥ 30 HRc superalloys Fe/NiCo based ≥ 30 HRc titanium alloys titanium alloys

very suitable suitable

Catalogue page Download
Cutting values Download
STEP Download
DXF Download
Catalogue page Download
Cutting values Download

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 22,-

- for orders over € 100,- delivery costs € 11,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.