Reverse countersink 180°, maximum countersink 33mm 1xCC0009T3 IC 

Reverse countersink 180°, maximum countersink 33mm 1xCC0009T3 IC
Reverse countersink 180°, maximum countersink 33mm 1xCC0009T3 IC Reverse countersink 180°, maximum countersink 33mm 1xCC0009T3 IC Reverse countersink 180°, maximum countersink 33mm 1xCC0009T3 IC
Description
180° reverse countersink
  • For rotating use with stationary workpieces
  • For ISO indexable cutting inserts (CPMT or CCM and CCG)
  • With internal cooling, (Ø15 and Ø18 without internal cooling)
  • Straight shank with clamping surface (Whistle notch)
  • D5 = maximum countersink diameter


    1. Positioning: pay attention to the cutting edge position!
    2. Move from the centre to the cutting edge opposite “E”.
    3. Move eccentrically through the bore.
    4. Move back to the centre.
    5. Reverse countersink with speed “N” and feed “F”.
    6. Move from the centre to the cutting edge opposite “E” and retract from the hole.

180° reverse countersink
  • For rotating use with stationary workpieces
  • For ISO indexable cutting inserts (CPMT or CCM and CCG)
  • With internal cooling, (Ø15 and Ø18 without internal cooling)
  • Straight shank with clamping surface (Whistle notch)
  • D5 = maximum countersink diameter


    1. Positioning: pay attention to the cutting edge position!
    2. Move from the centre to the cutting edge opposite “E”.
    3. Move eccentrically through the bore.
    4. Move back to the centre.
    5. Reverse countersink with speed “N” and feed “F”.
    6. Move from the centre to the cutting edge opposite “E” and retract from the hole.

Article no./ATORN no.
1525010330 / 11113633
Packaging unit
1
Catalogue page
KS-0224
Cutting values
SW-0407
Stock status
Only 3 pieces left!
Special offer
243,00 €
(324,00 € catalogue price / 25% saved)
Add to shopping cart
Tool Finder

Technical characteristics

Anzahl Schneiden Coolant supply Coolant supply Cutting data Cutting data D D D min. D min. D1 D1 D2 D2 E E Eignung Edelstahl gesamt Eignung nicht Eisen gesamt Eignung Titan/Nickel/Super gesamt fitness hartl total L L L L L1 L1 L3 L3 Schneidendurchmesser max. Schneidendurchmesser min. Schneidendurchmesser min./max. suitable indexable inserts suitable indexable inserts Toleranz Schaftdurchmesser Tool holding device Tool holding device
1 pc. Internal Internal Cutting angle Information - yes Cutting angle Information - yes 33 mm 33 mm 21 mm 21 mm 20 mm 20 mm 25 mm 25 mm 6,5 mm 6,5 mm 0 0 0 0 152 mm 75 mm 152 mm 75 mm 102 mm 102 mm 82 mm 82 mm 76,0 mm 15,0 mm 15,0-76,0 mm CC..09 CC..09 h6 HE parallel shank HE parallel shank
Catalogue page Download
Cutting values Download
DXF Download
ASSET_MatSafetyDataSheet Download
Catalogue page Download
Cutting values Download
Torx screw M4x8
Torx screw M4x8
3209012502
Being ordered
14,70 €
Order quantity
Wing-handle screwdriver T15
Being ordered
2,70 €
Order quantity

Delivery within EU countries:

Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Greece, Great Britain, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden.

 

Delivery costs

Delivery costs depend on the order value.

- for orders less than € 100,- delivery costs € 24,-

- for orders over € 100,- delivery costs € 12,-

 

Exceptions

Unless otherwise stated, the delivery of bulky or heavy-weight items such as granite plates without special agreement in principle from Ratingen, Germany or directly from the manufacturer with additional shipping costs, excluding packaging.