High-performance drill bit SC ALU-CC 5xD 6.8 mm with IC AluSpeed®

High-performance drill bit SC ALU-CC 5xD 6.8 mm with IC AluSpeed®
High-performance drill bit SC ALU-CC 5xD 6.8 mm with IC AluSpeed® High-performance drill bit SC ALU-CC 5xD 6.8 mm with IC AluSpeed®
Special offer
40,40 €
(101,00 € catalogue price / 60% saved)
prices excl. vat plus shipping costs

Stock status
Only 4 pieces left!
Tool Finder

Ordered by 18:00 - delivered tomorrow.

Solid carbide high-performance drill bit AluSpeed 5D
  • Twisted cooling channel
  • 6-fold guide chamfers, guarantees very high alignment precision and stabilisation of the drill bit
  • Cutting material: ultra-superfine grain solid carbide K40F, Alu-CC-coated
  • Defined cutting-edge rounding to minimise micro-nicks on the tool cutting edge
  • Coolant pressure min. 12 bar

Solid carbide high-performance drill bit AluSpeed 5D
  • Twisted cooling channel
  • 6-fold guide chamfers, guarantees very high alignment precision and stabilisation of the drill bit
  • Cutting material: ultra-superfine grain solid carbide K40F, Alu-CC-coated
  • Defined cutting-edge rounding to minimise micro-nicks on the tool cutting edge
  • Coolant pressure min. 12 bar

Article no./ATORN no.
1114000680 / 10912551
Packaging unit
1
Catalogue page

Technical characteristics

A-Maß 1,41 mm
Angle of the tip - S 135 °
Coating TiB2
Coating TiB2
Coolant supply Internal
Coolant supply Internal
Cutting data Cutting angle Information - yes
Cutting data Cutting angle Information - yes
Cutting material Solid carbide
Cutting material Solid carbide
D 6,80 mm
D 6,80 mm
D1 8 mm
D1 8 mm
DIN 6537
DIN 6537
Eignung Edelstahl gesamt 3
Eignung nicht Eisen gesamt 2
Eignung Titan/Nickel/Super gesamt 3
Feed f aluminium 0,4 mm/rev
Feed f aluminium 0,4 mm/rev
fitness hartl total 3
Halslänge 53 mm
Konischer Übergang Halskontur (xsg) 55 mm
Kraglänge 55 mm
L 91 mm
L 91 mm
L1 53 mm
L1 53 mm
Max. drilling depth (D) 5xD
Max. drilling depth (D) 5xD
Nutzlänge 43 mm
S 135 °
Schaftlänge 36 mm
Schaftlänge berechnet 36 mm
Schneidendurchmesser max. 20,0 mm
Schneidendurchmesser min. 2,5 mm
Schneidendurchmesser min./max. 2,5-20,0 mm
Schnittgeschwindigkeit (Bronze kurz) Eignung 1
Schnittgeschwindigkeit (Bronze kurz) Vc 160,00 m/min
Schnittgeschwindigkeit (Bronze lang) Eignung 1
Schnittgeschwindigkeit (Bronze lang) Vc 120,00 m/min
Schnittgeschwindigkeit (Kunststoff ) Eignung 3
Schnittgeschwindigkeit (Messing lang) Eignung 1
Schnittgeschwindigkeit (Messing lang) Vc 190,00 m/min
Section shape Split point
Section shape Split point
Surface CC
Surface CC
Tolerance of cutting edge diameter h7 mm
Tolerance of cutting edge diameter h7
Tolerance of shank diameter h6 mm
Tolerance of shank diameter h6
Tool holding device HA parallel shank
Tool holding device HA parallel shank
Twist angle 15°
Twist angle 15°
Type HPC ALU
Type HPC ALU
Z 2 pc.
Z 2 pc.

Usage characteristics

aluminium < 8 % Si
aluminium < 8 % Si
aluminium ≥ 8 % Si
aluminium ≥ 8 % Si
brass short
brass short
cast iron GGG
cast iron GGG
    
very suitable
suitable
Catalogue page Download
Cutting values Download
STEP Download
DXF Download
ASSET_MatSafetyDataSheet Download
Catalogue page Download
Cutting values Download